From 97e588d39d741016e7add4773801327491f9b6ad Mon Sep 17 00:00:00 2001 From: unicod Date: Tue, 10 Jun 2025 22:07:18 +0200 Subject: [PATCH] Custom systick handling --- .cproject | 4 +- .mxproject | 28 +- Core/Inc/dma.h | 52 + Core/Inc/stm32f3xx_hal_conf.h | 2 +- Core/Inc/stm32f3xx_it.h | 4 + Core/Inc/usart.h | 4 - Core/Src/dma.c | 58 + Core/Src/main.c | 9 +- Core/Src/stm32f3xx_it.c | 243 +- Core/Src/usart.c | 239 +- Core/user/uart5_it.c | 64 +- .../Inc/stm32f3xx_hal_uart.h | 1588 ------- .../Inc/stm32f3xx_hal_uart_ex.h | 513 --- .../Src/stm32f3xx_hal_uart.c | 4012 ----------------- .../Src/stm32f3xx_hal_uart_ex.c | 773 ---- Nucleo-F303RE.ioc | 46 +- 16 files changed, 437 insertions(+), 7202 deletions(-) create mode 100644 Core/Inc/dma.h create mode 100644 Core/Src/dma.c delete mode 100644 Drivers/STM32F3xx_HAL_Driver/Inc/stm32f3xx_hal_uart.h delete mode 100644 Drivers/STM32F3xx_HAL_Driver/Inc/stm32f3xx_hal_uart_ex.h delete mode 100644 Drivers/STM32F3xx_HAL_Driver/Src/stm32f3xx_hal_uart.c delete mode 100644 Drivers/STM32F3xx_HAL_Driver/Src/stm32f3xx_hal_uart_ex.c diff --git a/.cproject b/.cproject index c531b61..d57df10 100644 --- a/.cproject +++ b/.cproject @@ -51,8 +51,8 @@ - + @@ -132,8 +132,8 @@ - + diff --git a/.mxproject b/.mxproject index f0a6f32..32b69f0 100644 --- a/.mxproject +++ b/.mxproject @@ -1,35 +1,37 @@ [PreviousLibFiles] -LibFiles=Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_ll_gpio.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_ll_system.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_ll_adc.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_ll_dma.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_ll_bus.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_ll_cortex.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_ll_rcc.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_ll_crs.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_ll_utils.h;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_ll_utils.c;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_ll_exti.h;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_ll_exti.c;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_ll_pwr.h;Drivers\STM32F3xx_HAL_Driver\Inc\Legacy\stm32_hal_legacy.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_hal.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_hal_def.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_hal_rcc.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_hal_rcc_ex.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_hal_gpio.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_hal_gpio_ex.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_hal_dma_ex.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_hal_dma.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_hal_cortex.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_hal_pwr.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_hal_pwr_ex.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_hal_flash.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_hal_flash_ex.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_hal_i2c.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_hal_i2c_ex.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_hal_exti.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_ll_crc.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_ll_dac.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_ll_usart.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_hal_uart.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_hal_uart_ex.h;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_ll_gpio.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_ll_adc.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_ll_dma.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_ll_rcc.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal_rcc.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal_rcc_ex.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal_gpio.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal_dma.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal_cortex.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal_pwr.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal_pwr_ex.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal_flash.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal_flash_ex.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal_i2c.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal_i2c_ex.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal_exti.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_ll_crc.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_ll_dac.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_ll_usart.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal_uart.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal_uart_ex.c;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_ll_gpio.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_ll_system.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_ll_adc.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_ll_dma.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_ll_bus.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_ll_cortex.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_ll_rcc.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_ll_crs.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_ll_utils.h;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_ll_utils.c;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_ll_exti.h;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_ll_exti.c;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_ll_pwr.h;Drivers\STM32F3xx_HAL_Driver\Inc\Legacy\stm32_hal_legacy.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_hal.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_hal_def.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_hal_rcc.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_hal_rcc_ex.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_hal_gpio.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_hal_gpio_ex.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_hal_dma_ex.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_hal_dma.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_hal_cortex.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_hal_pwr.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_hal_pwr_ex.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_hal_flash.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_hal_flash_ex.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_hal_i2c.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_hal_i2c_ex.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_hal_exti.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_ll_crc.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_ll_dac.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_ll_usart.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_hal_uart.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_hal_uart_ex.h;Drivers\CMSIS\Device\ST\STM32F3xx\Include\stm32f303xe.h;Drivers\CMSIS\Device\ST\STM32F3xx\Include\stm32f3xx.h;Drivers\CMSIS\Device\ST\STM32F3xx\Include\system_stm32f3xx.h;Drivers\CMSIS\Device\ST\STM32F3xx\Include\system_stm32f3xx.h;Drivers\CMSIS\Device\ST\STM32F3xx\Source\Templates\system_stm32f3xx.c;Drivers\CMSIS\Include\cmsis_armcc.h;Drivers\CMSIS\Include\cmsis_armclang.h;Drivers\CMSIS\Include\cmsis_compiler.h;Drivers\CMSIS\Include\cmsis_gcc.h;Drivers\CMSIS\Include\cmsis_iccarm.h;Drivers\CMSIS\Include\cmsis_version.h;Drivers\CMSIS\Include\core_armv8mbl.h;Drivers\CMSIS\Include\core_armv8mml.h;Drivers\CMSIS\Include\core_cm0.h;Drivers\CMSIS\Include\core_cm0plus.h;Drivers\CMSIS\Include\core_cm1.h;Drivers\CMSIS\Include\core_cm23.h;Drivers\CMSIS\Include\core_cm3.h;Drivers\CMSIS\Include\core_cm33.h;Drivers\CMSIS\Include\core_cm4.h;Drivers\CMSIS\Include\core_cm7.h;Drivers\CMSIS\Include\core_sc000.h;Drivers\CMSIS\Include\core_sc300.h;Drivers\CMSIS\Include\mpu_armv7.h;Drivers\CMSIS\Include\mpu_armv8.h;Drivers\CMSIS\Include\tz_context.h; +LibFiles=Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_ll_gpio.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_ll_system.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_ll_adc.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_ll_dma.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_ll_bus.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_ll_cortex.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_ll_rcc.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_ll_crs.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_ll_utils.h;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_ll_utils.c;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_ll_exti.h;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_ll_exti.c;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_ll_pwr.h;Drivers\STM32F3xx_HAL_Driver\Inc\Legacy\stm32_hal_legacy.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_hal.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_hal_def.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_hal_rcc.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_hal_rcc_ex.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_hal_gpio.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_hal_gpio_ex.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_hal_dma_ex.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_hal_dma.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_hal_cortex.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_hal_pwr.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_hal_pwr_ex.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_hal_flash.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_hal_flash_ex.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_hal_i2c.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_hal_i2c_ex.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_hal_exti.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_ll_crc.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_ll_dac.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_ll_usart.h;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_ll_gpio.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_ll_adc.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_ll_dma.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_ll_rcc.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal_rcc.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal_rcc_ex.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal_gpio.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal_dma.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal_cortex.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal_pwr.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal_pwr_ex.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal_flash.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal_flash_ex.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal_i2c.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal_i2c_ex.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal_exti.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_ll_crc.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_ll_dac.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_ll_usart.c;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_ll_gpio.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_ll_system.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_ll_adc.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_ll_dma.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_ll_bus.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_ll_cortex.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_ll_rcc.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_ll_crs.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_ll_utils.h;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_ll_utils.c;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_ll_exti.h;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_ll_exti.c;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_ll_pwr.h;Drivers\STM32F3xx_HAL_Driver\Inc\Legacy\stm32_hal_legacy.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_hal.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_hal_def.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_hal_rcc.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_hal_rcc_ex.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_hal_gpio.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_hal_gpio_ex.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_hal_dma_ex.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_hal_dma.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_hal_cortex.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_hal_pwr.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_hal_pwr_ex.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_hal_flash.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_hal_flash_ex.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_hal_i2c.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_hal_i2c_ex.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_hal_exti.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_ll_crc.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_ll_dac.h;Drivers\STM32F3xx_HAL_Driver\Inc\stm32f3xx_ll_usart.h;Drivers\CMSIS\Device\ST\STM32F3xx\Include\stm32f303xe.h;Drivers\CMSIS\Device\ST\STM32F3xx\Include\stm32f3xx.h;Drivers\CMSIS\Device\ST\STM32F3xx\Include\system_stm32f3xx.h;Drivers\CMSIS\Device\ST\STM32F3xx\Include\system_stm32f3xx.h;Drivers\CMSIS\Device\ST\STM32F3xx\Source\Templates\system_stm32f3xx.c;Drivers\CMSIS\Include\cmsis_armcc.h;Drivers\CMSIS\Include\cmsis_armclang.h;Drivers\CMSIS\Include\cmsis_compiler.h;Drivers\CMSIS\Include\cmsis_gcc.h;Drivers\CMSIS\Include\cmsis_iccarm.h;Drivers\CMSIS\Include\cmsis_version.h;Drivers\CMSIS\Include\core_armv8mbl.h;Drivers\CMSIS\Include\core_armv8mml.h;Drivers\CMSIS\Include\core_cm0.h;Drivers\CMSIS\Include\core_cm0plus.h;Drivers\CMSIS\Include\core_cm1.h;Drivers\CMSIS\Include\core_cm23.h;Drivers\CMSIS\Include\core_cm3.h;Drivers\CMSIS\Include\core_cm33.h;Drivers\CMSIS\Include\core_cm4.h;Drivers\CMSIS\Include\core_cm7.h;Drivers\CMSIS\Include\core_sc000.h;Drivers\CMSIS\Include\core_sc300.h;Drivers\CMSIS\Include\mpu_armv7.h;Drivers\CMSIS\Include\mpu_armv8.h;Drivers\CMSIS\Include\tz_context.h; [PreviousUsedCubeIDEFiles] -SourceFiles=Core\Src\main.c;Core\Src\gpio.c;Core\Src\adc.c;Core\Src\crc.c;Core\Src\dac.c;Core\Src\usart.c;Core\Src\stm32f3xx_it.c;Core\Src\stm32f3xx_hal_msp.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_ll_utils.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_ll_exti.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_ll_gpio.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_ll_adc.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_ll_dma.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_ll_rcc.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal_rcc.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal_rcc_ex.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal_gpio.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal_dma.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal_cortex.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal_pwr.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal_pwr_ex.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal_flash.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal_flash_ex.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal_i2c.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal_i2c_ex.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal_exti.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_ll_crc.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_ll_dac.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_ll_usart.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal_uart.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal_uart_ex.c;Drivers\CMSIS\Device\ST\STM32F3xx\Source\Templates\system_stm32f3xx.c;Core\Src\system_stm32f3xx.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_ll_utils.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_ll_exti.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_ll_gpio.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_ll_adc.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_ll_dma.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_ll_rcc.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal_rcc.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal_rcc_ex.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal_gpio.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal_dma.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal_cortex.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal_pwr.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal_pwr_ex.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal_flash.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal_flash_ex.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal_i2c.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal_i2c_ex.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal_exti.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_ll_crc.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_ll_dac.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_ll_usart.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal_uart.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal_uart_ex.c;Drivers\CMSIS\Device\ST\STM32F3xx\Source\Templates\system_stm32f3xx.c;Core\Src\system_stm32f3xx.c;;; +SourceFiles=Core\Src\main.c;Core\Src\gpio.c;Core\Src\adc.c;Core\Src\crc.c;Core\Src\dac.c;Core\Src\dma.c;Core\Src\usart.c;Core\Src\stm32f3xx_it.c;Core\Src\stm32f3xx_hal_msp.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_ll_utils.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_ll_exti.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_ll_gpio.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_ll_adc.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_ll_dma.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_ll_rcc.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal_rcc.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal_rcc_ex.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal_gpio.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal_dma.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal_cortex.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal_pwr.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal_pwr_ex.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal_flash.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal_flash_ex.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal_i2c.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal_i2c_ex.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal_exti.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_ll_crc.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_ll_dac.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_ll_usart.c;Drivers\CMSIS\Device\ST\STM32F3xx\Source\Templates\system_stm32f3xx.c;Core\Src\system_stm32f3xx.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_ll_utils.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_ll_exti.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_ll_gpio.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_ll_adc.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_ll_dma.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_ll_rcc.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal_rcc.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal_rcc_ex.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal_gpio.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal_dma.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal_cortex.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal_pwr.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal_pwr_ex.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal_flash.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal_flash_ex.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal_i2c.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal_i2c_ex.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_hal_exti.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_ll_crc.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_ll_dac.c;Drivers\STM32F3xx_HAL_Driver\Src\stm32f3xx_ll_usart.c;Drivers\CMSIS\Device\ST\STM32F3xx\Source\Templates\system_stm32f3xx.c;Core\Src\system_stm32f3xx.c;;; HeaderPath=Drivers\STM32F3xx_HAL_Driver\Inc;Drivers\STM32F3xx_HAL_Driver\Inc\Legacy;Drivers\CMSIS\Device\ST\STM32F3xx\Include;Drivers\CMSIS\Include;Core\Inc; CDefines=USE_FULL_LL_DRIVER;USE_HAL_DRIVER;STM32F303xE;USE_FULL_LL_DRIVER;USE_HAL_DRIVER;USE_HAL_DRIVER; [PreviousGenFiles] AdvancedFolderStructure=true -HeaderFileListSize=9 +HeaderFileListSize=10 HeaderFiles#0=..\Core\Inc\gpio.h HeaderFiles#1=..\Core\Inc\adc.h HeaderFiles#2=..\Core\Inc\crc.h HeaderFiles#3=..\Core\Inc\dac.h -HeaderFiles#4=..\Core\Inc\usart.h -HeaderFiles#5=..\Core\Inc\stm32f3xx_it.h -HeaderFiles#6=..\Core\Inc\stm32_assert.h -HeaderFiles#7=..\Core\Inc\stm32f3xx_hal_conf.h -HeaderFiles#8=..\Core\Inc\main.h +HeaderFiles#4=..\Core\Inc\dma.h +HeaderFiles#5=..\Core\Inc\usart.h +HeaderFiles#6=..\Core\Inc\stm32f3xx_it.h +HeaderFiles#7=..\Core\Inc\stm32_assert.h +HeaderFiles#8=..\Core\Inc\stm32f3xx_hal_conf.h +HeaderFiles#9=..\Core\Inc\main.h HeaderFolderListSize=1 HeaderPath#0=..\Core\Inc HeaderFiles=; -SourceFileListSize=8 +SourceFileListSize=9 SourceFiles#0=..\Core\Src\gpio.c SourceFiles#1=..\Core\Src\adc.c SourceFiles#2=..\Core\Src\crc.c SourceFiles#3=..\Core\Src\dac.c -SourceFiles#4=..\Core\Src\usart.c -SourceFiles#5=..\Core\Src\stm32f3xx_it.c -SourceFiles#6=..\Core\Src\stm32f3xx_hal_msp.c -SourceFiles#7=..\Core\Src\main.c +SourceFiles#4=..\Core\Src\dma.c +SourceFiles#5=..\Core\Src\usart.c +SourceFiles#6=..\Core\Src\stm32f3xx_it.c +SourceFiles#7=..\Core\Src\stm32f3xx_hal_msp.c +SourceFiles#8=..\Core\Src\main.c SourceFolderListSize=1 SourcePath#0=..\Core\Src SourceFiles=; diff --git a/Core/Inc/dma.h b/Core/Inc/dma.h new file mode 100644 index 0000000..493d98e --- /dev/null +++ b/Core/Inc/dma.h @@ -0,0 +1,52 @@ +/* USER CODE BEGIN Header */ +/** + ****************************************************************************** + * @file dma.h + * @brief This file contains all the function prototypes for + * the dma.c file + ****************************************************************************** + * @attention + * + * Copyright (c) 2025 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ +/* USER CODE END Header */ +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __DMA_H__ +#define __DMA_H__ + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "main.h" + +/* DMA memory to memory transfer handles -------------------------------------*/ + +/* USER CODE BEGIN Includes */ + +/* USER CODE END Includes */ + +/* USER CODE BEGIN Private defines */ + +/* USER CODE END Private defines */ + +void MX_DMA_Init(void); + +/* USER CODE BEGIN Prototypes */ + +/* USER CODE END Prototypes */ + +#ifdef __cplusplus +} +#endif + +#endif /* __DMA_H__ */ + diff --git a/Core/Inc/stm32f3xx_hal_conf.h b/Core/Inc/stm32f3xx_hal_conf.h index ce396b6..e107d3c 100644 --- a/Core/Inc/stm32f3xx_hal_conf.h +++ b/Core/Inc/stm32f3xx_hal_conf.h @@ -58,7 +58,7 @@ /*#define HAL_RTC_MODULE_ENABLED */ /*#define HAL_SPI_MODULE_ENABLED */ /*#define HAL_TIM_MODULE_ENABLED */ -#define HAL_UART_MODULE_ENABLED +/*#define HAL_UART_MODULE_ENABLED */ /*#define HAL_USART_MODULE_ENABLED */ /*#define HAL_IRDA_MODULE_ENABLED */ /*#define HAL_SMARTCARD_MODULE_ENABLED */ diff --git a/Core/Inc/stm32f3xx_it.h b/Core/Inc/stm32f3xx_it.h index 096e046..02f8433 100644 --- a/Core/Inc/stm32f3xx_it.h +++ b/Core/Inc/stm32f3xx_it.h @@ -55,7 +55,11 @@ void SVC_Handler(void); void DebugMon_Handler(void); void PendSV_Handler(void); void SysTick_Handler(void); +void DMA1_Channel6_IRQHandler(void); +void DMA1_Channel7_IRQHandler(void); /* USER CODE BEGIN EFP */ +uint32_t SysTimeGetAbs(void); +int32_t SysTimeGetRel(uint32_t tref); /* USER CODE END EFP */ diff --git a/Core/Inc/usart.h b/Core/Inc/usart.h index 2cccff1..ca7c54d 100644 --- a/Core/Inc/usart.h +++ b/Core/Inc/usart.h @@ -32,10 +32,6 @@ extern "C" { /* USER CODE END Includes */ -extern UART_HandleTypeDef huart2; - -extern UART_HandleTypeDef huart3; - /* USER CODE BEGIN Private defines */ /* USER CODE END Private defines */ diff --git a/Core/Src/dma.c b/Core/Src/dma.c new file mode 100644 index 0000000..c56ccd3 --- /dev/null +++ b/Core/Src/dma.c @@ -0,0 +1,58 @@ +/* USER CODE BEGIN Header */ +/** + ****************************************************************************** + * @file dma.c + * @brief This file provides code for the configuration + * of all the requested memory to memory DMA transfers. + ****************************************************************************** + * @attention + * + * Copyright (c) 2025 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ +/* USER CODE END Header */ + +/* Includes ------------------------------------------------------------------*/ +#include "dma.h" + +/* USER CODE BEGIN 0 */ + +/* USER CODE END 0 */ + +/*----------------------------------------------------------------------------*/ +/* Configure DMA */ +/*----------------------------------------------------------------------------*/ + +/* USER CODE BEGIN 1 */ + +/* USER CODE END 1 */ + +/** + * Enable DMA controller clock + */ +void MX_DMA_Init(void) +{ + + /* DMA controller clock enable */ + __HAL_RCC_DMA1_CLK_ENABLE(); + + /* DMA interrupt init */ + /* DMA1_Channel6_IRQn interrupt configuration */ + NVIC_SetPriority(DMA1_Channel6_IRQn, NVIC_EncodePriority(NVIC_GetPriorityGrouping(),0, 0)); + NVIC_EnableIRQ(DMA1_Channel6_IRQn); + /* DMA1_Channel7_IRQn interrupt configuration */ + NVIC_SetPriority(DMA1_Channel7_IRQn, NVIC_EncodePriority(NVIC_GetPriorityGrouping(),0, 0)); + NVIC_EnableIRQ(DMA1_Channel7_IRQn); + +} + +/* USER CODE BEGIN 2 */ + +/* USER CODE END 2 */ + diff --git a/Core/Src/main.c b/Core/Src/main.c index 2c43f00..2505034 100644 --- a/Core/Src/main.c +++ b/Core/Src/main.c @@ -21,13 +21,16 @@ #include "adc.h" #include "crc.h" #include "dac.h" +#include "dma.h" #include "usart.h" #include "gpio.h" /* Private includes ----------------------------------------------------------*/ /* USER CODE BEGIN Includes */ #include "printf.h" +#include #include "uart5_it.h" +#include "stm32f3xx_it.h" /* USER CODE END Includes */ /* Private typedef -----------------------------------------------------------*/ @@ -92,12 +95,12 @@ int main(void) { SystemClock_Config(); /* USER CODE BEGIN SysInit */ - SysTick_Config(SystemCoreClock / 1000); - + //SysTick_Config(SystemCoreClock / 1000); /* USER CODE END SysInit */ /* Initialize all configured peripherals */ MX_GPIO_Init(); + MX_DMA_Init(); MX_ADC1_Init(); MX_CRC_Init(); MX_DAC1_Init(); @@ -118,7 +121,7 @@ int main(void) { if (c != -1) { // new incoming data Uart5_PutByte(c); // UART5rx --> UART5tx LL_GPIO_TogglePin(GPIOA, LL_GPIO_PIN_5); - printf(" %u ms\n", HAL_GetTick()); + printf(" %u ms\n", SysTimeGetAbs()); } /* USER CODE END WHILE */ diff --git a/Core/Src/stm32f3xx_it.c b/Core/Src/stm32f3xx_it.c index cc57432..e7ebefe 100644 --- a/Core/Src/stm32f3xx_it.c +++ b/Core/Src/stm32f3xx_it.c @@ -1,20 +1,20 @@ /* USER CODE BEGIN Header */ /** - ****************************************************************************** - * @file stm32f3xx_it.c - * @brief Interrupt Service Routines. - ****************************************************************************** - * @attention - * - * Copyright (c) 2025 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - */ + ****************************************************************************** + * @file stm32f3xx_it.c + * @brief Interrupt Service Routines. + ****************************************************************************** + * @attention + * + * Copyright (c) 2025 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ /* USER CODE END Header */ /* Includes ------------------------------------------------------------------*/ @@ -41,7 +41,7 @@ /* Private variables ---------------------------------------------------------*/ /* USER CODE BEGIN PV */ - +static volatile uint32_t SysTickCnt_ms = 0; /* USER CODE END PV */ /* Private function prototypes -----------------------------------------------*/ @@ -52,6 +52,20 @@ /* Private user code ---------------------------------------------------------*/ /* USER CODE BEGIN 0 */ +/***************************************************************************//** +* @brief Get absolute system time ms +*//****************************************************************************/ +uint32_t SysTimeGetAbs (void) { + return SysTickCnt_ms; +} +/***************************************************************************//** +* @brief Get relative time ms +*//****************************************************************************/ +int32_t SysTimeGetRel (uint32_t tref) { + int32_t tdif = SysTickCnt_ms - tref; + return tdif; +} + /* USER CODE END 0 */ /* External variables --------------------------------------------------------*/ @@ -64,131 +78,118 @@ /* Cortex-M4 Processor Interruption and Exception Handlers */ /******************************************************************************/ /** - * @brief This function handles Non maskable interrupt. - */ -void NMI_Handler(void) -{ - /* USER CODE BEGIN NonMaskableInt_IRQn 0 */ - - /* USER CODE END NonMaskableInt_IRQn 0 */ - /* USER CODE BEGIN NonMaskableInt_IRQn 1 */ - while (1) - { - } - /* USER CODE END NonMaskableInt_IRQn 1 */ + * @brief This function handles Non maskable interrupt. + */ +void NMI_Handler(void) { + /* USER CODE BEGIN NonMaskableInt_IRQn 0 */ + + /* USER CODE END NonMaskableInt_IRQn 0 */ + /* USER CODE BEGIN NonMaskableInt_IRQn 1 */ + while (1) { + } + /* USER CODE END NonMaskableInt_IRQn 1 */ } /** - * @brief This function handles Hard fault interrupt. - */ -void HardFault_Handler(void) -{ - /* USER CODE BEGIN HardFault_IRQn 0 */ - - /* USER CODE END HardFault_IRQn 0 */ - while (1) - { - /* USER CODE BEGIN W1_HardFault_IRQn 0 */ - /* USER CODE END W1_HardFault_IRQn 0 */ - } + * @brief This function handles Hard fault interrupt. + */ +void HardFault_Handler(void) { + /* USER CODE BEGIN HardFault_IRQn 0 */ + + /* USER CODE END HardFault_IRQn 0 */ + while (1) { + /* USER CODE BEGIN W1_HardFault_IRQn 0 */ + /* USER CODE END W1_HardFault_IRQn 0 */ + } } /** - * @brief This function handles Memory management fault. - */ -void MemManage_Handler(void) -{ - /* USER CODE BEGIN MemoryManagement_IRQn 0 */ - - /* USER CODE END MemoryManagement_IRQn 0 */ - while (1) - { - /* USER CODE BEGIN W1_MemoryManagement_IRQn 0 */ - /* USER CODE END W1_MemoryManagement_IRQn 0 */ - } + * @brief This function handles Memory management fault. + */ +void MemManage_Handler(void) { + /* USER CODE BEGIN MemoryManagement_IRQn 0 */ + + /* USER CODE END MemoryManagement_IRQn 0 */ + while (1) { + /* USER CODE BEGIN W1_MemoryManagement_IRQn 0 */ + /* USER CODE END W1_MemoryManagement_IRQn 0 */ + } } /** - * @brief This function handles Pre-fetch fault, memory access fault. - */ -void BusFault_Handler(void) -{ - /* USER CODE BEGIN BusFault_IRQn 0 */ - - /* USER CODE END BusFault_IRQn 0 */ - while (1) - { - /* USER CODE BEGIN W1_BusFault_IRQn 0 */ - /* USER CODE END W1_BusFault_IRQn 0 */ - } + * @brief This function handles Pre-fetch fault, memory access fault. + */ +void BusFault_Handler(void) { + /* USER CODE BEGIN BusFault_IRQn 0 */ + + /* USER CODE END BusFault_IRQn 0 */ + while (1) { + /* USER CODE BEGIN W1_BusFault_IRQn 0 */ + /* USER CODE END W1_BusFault_IRQn 0 */ + } } /** - * @brief This function handles Undefined instruction or illegal state. - */ -void UsageFault_Handler(void) -{ - /* USER CODE BEGIN UsageFault_IRQn 0 */ - - /* USER CODE END UsageFault_IRQn 0 */ - while (1) - { - /* USER CODE BEGIN W1_UsageFault_IRQn 0 */ - /* USER CODE END W1_UsageFault_IRQn 0 */ - } + * @brief This function handles Undefined instruction or illegal state. + */ +void UsageFault_Handler(void) { + /* USER CODE BEGIN UsageFault_IRQn 0 */ + + /* USER CODE END UsageFault_IRQn 0 */ + while (1) { + /* USER CODE BEGIN W1_UsageFault_IRQn 0 */ + /* USER CODE END W1_UsageFault_IRQn 0 */ + } } /** - * @brief This function handles System service call via SWI instruction. - */ -void SVC_Handler(void) -{ - /* USER CODE BEGIN SVCall_IRQn 0 */ + * @brief This function handles System service call via SWI instruction. + */ +void SVC_Handler(void) { + /* USER CODE BEGIN SVCall_IRQn 0 */ - /* USER CODE END SVCall_IRQn 0 */ - /* USER CODE BEGIN SVCall_IRQn 1 */ + /* USER CODE END SVCall_IRQn 0 */ + /* USER CODE BEGIN SVCall_IRQn 1 */ - /* USER CODE END SVCall_IRQn 1 */ + /* USER CODE END SVCall_IRQn 1 */ } /** - * @brief This function handles Debug monitor. - */ -void DebugMon_Handler(void) -{ - /* USER CODE BEGIN DebugMonitor_IRQn 0 */ + * @brief This function handles Debug monitor. + */ +void DebugMon_Handler(void) { + /* USER CODE BEGIN DebugMonitor_IRQn 0 */ - /* USER CODE END DebugMonitor_IRQn 0 */ - /* USER CODE BEGIN DebugMonitor_IRQn 1 */ + /* USER CODE END DebugMonitor_IRQn 0 */ + /* USER CODE BEGIN DebugMonitor_IRQn 1 */ - /* USER CODE END DebugMonitor_IRQn 1 */ + /* USER CODE END DebugMonitor_IRQn 1 */ } /** - * @brief This function handles Pendable request for system service. - */ -void PendSV_Handler(void) -{ - /* USER CODE BEGIN PendSV_IRQn 0 */ + * @brief This function handles Pendable request for system service. + */ +void PendSV_Handler(void) { + /* USER CODE BEGIN PendSV_IRQn 0 */ - /* USER CODE END PendSV_IRQn 0 */ - /* USER CODE BEGIN PendSV_IRQn 1 */ + /* USER CODE END PendSV_IRQn 0 */ + /* USER CODE BEGIN PendSV_IRQn 1 */ - /* USER CODE END PendSV_IRQn 1 */ + /* USER CODE END PendSV_IRQn 1 */ } /** - * @brief This function handles System tick timer. - */ -void SysTick_Handler(void) -{ - /* USER CODE BEGIN SysTick_IRQn 0 */ + * @brief This function handles System tick timer. + */ +void SysTick_Handler(void) { + /* USER CODE BEGIN SysTick_IRQn 0 */ + SysTickCnt_ms++; - /* USER CODE END SysTick_IRQn 0 */ - HAL_IncTick(); - /* USER CODE BEGIN SysTick_IRQn 1 */ + /* USER CODE END SysTick_IRQn 0 */ + HAL_IncTick(); + /* USER CODE BEGIN SysTick_IRQn 1 */ - /* USER CODE END SysTick_IRQn 1 */ + /* USER CODE END SysTick_IRQn 1 */ } /******************************************************************************/ @@ -198,6 +199,30 @@ void SysTick_Handler(void) /* please refer to the startup file (startup_stm32f3xx.s). */ /******************************************************************************/ +/** + * @brief This function handles DMA1 channel6 global interrupt. + */ +void DMA1_Channel6_IRQHandler(void) { + /* USER CODE BEGIN DMA1_Channel6_IRQn 0 */ + + /* USER CODE END DMA1_Channel6_IRQn 0 */ + /* USER CODE BEGIN DMA1_Channel6_IRQn 1 */ + + /* USER CODE END DMA1_Channel6_IRQn 1 */ +} + +/** + * @brief This function handles DMA1 channel7 global interrupt. + */ +void DMA1_Channel7_IRQHandler(void) { + /* USER CODE BEGIN DMA1_Channel7_IRQn 0 */ + + /* USER CODE END DMA1_Channel7_IRQn 0 */ + /* USER CODE BEGIN DMA1_Channel7_IRQn 1 */ + + /* USER CODE END DMA1_Channel7_IRQn 1 */ +} + /* USER CODE BEGIN 1 */ /* USER CODE END 1 */ diff --git a/Core/Src/usart.c b/Core/Src/usart.c index 0eac176..78f8c82 100644 --- a/Core/Src/usart.c +++ b/Core/Src/usart.c @@ -24,9 +24,6 @@ /* USER CODE END 0 */ -UART_HandleTypeDef huart2; -UART_HandleTypeDef huart3; - /* UART5 init function */ void MX_UART5_Init(void) { @@ -95,164 +92,132 @@ void MX_USART2_UART_Init(void) /* USER CODE END USART2_Init 0 */ - /* USER CODE BEGIN USART2_Init 1 */ + LL_USART_InitTypeDef USART_InitStruct = {0}; - /* USER CODE END USART2_Init 1 */ - huart2.Instance = USART2; - huart2.Init.BaudRate = 38400; - huart2.Init.WordLength = UART_WORDLENGTH_8B; - huart2.Init.StopBits = UART_STOPBITS_1; - huart2.Init.Parity = UART_PARITY_NONE; - huart2.Init.Mode = UART_MODE_TX_RX; - huart2.Init.HwFlowCtl = UART_HWCONTROL_NONE; - huart2.Init.OverSampling = UART_OVERSAMPLING_16; - huart2.Init.OneBitSampling = UART_ONE_BIT_SAMPLE_DISABLE; - huart2.AdvancedInit.AdvFeatureInit = UART_ADVFEATURE_NO_INIT; - if (HAL_RS485Ex_Init(&huart2, UART_DE_POLARITY_HIGH, 0, 0) != HAL_OK) - { - Error_Handler(); - } - /* USER CODE BEGIN USART2_Init 2 */ + LL_GPIO_InitTypeDef GPIO_InitStruct = {0}; - /* USER CODE END USART2_Init 2 */ + /* Peripheral clock enable */ + LL_APB1_GRP1_EnableClock(LL_APB1_GRP1_PERIPH_USART2); -} -/* USART3 init function */ + LL_AHB1_GRP1_EnableClock(LL_AHB1_GRP1_PERIPH_GPIOA); + /**USART2 GPIO Configuration + PA1 ------> USART2_DE + PA2 ------> USART2_TX + PA3 ------> USART2_RX + */ + GPIO_InitStruct.Pin = LL_GPIO_PIN_1|USART2_TX_Pin|LL_GPIO_PIN_3; + GPIO_InitStruct.Mode = LL_GPIO_MODE_ALTERNATE; + GPIO_InitStruct.Speed = LL_GPIO_SPEED_FREQ_HIGH; + GPIO_InitStruct.OutputType = LL_GPIO_OUTPUT_PUSHPULL; + GPIO_InitStruct.Pull = LL_GPIO_PULL_NO; + GPIO_InitStruct.Alternate = LL_GPIO_AF_7; + LL_GPIO_Init(GPIOA, &GPIO_InitStruct); -void MX_USART3_UART_Init(void) -{ + /* USART2 DMA Init */ - /* USER CODE BEGIN USART3_Init 0 */ + /* USART2_RX Init */ + LL_DMA_SetDataTransferDirection(DMA1, LL_DMA_CHANNEL_6, LL_DMA_DIRECTION_PERIPH_TO_MEMORY); - /* USER CODE END USART3_Init 0 */ + LL_DMA_SetChannelPriorityLevel(DMA1, LL_DMA_CHANNEL_6, LL_DMA_PRIORITY_LOW); - /* USER CODE BEGIN USART3_Init 1 */ + LL_DMA_SetMode(DMA1, LL_DMA_CHANNEL_6, LL_DMA_MODE_NORMAL); - /* USER CODE END USART3_Init 1 */ - huart3.Instance = USART3; - huart3.Init.BaudRate = 115200; - huart3.Init.WordLength = UART_WORDLENGTH_8B; - huart3.Init.StopBits = UART_STOPBITS_1; - huart3.Init.Parity = UART_PARITY_NONE; - huart3.Init.Mode = UART_MODE_TX_RX; - huart3.Init.HwFlowCtl = UART_HWCONTROL_NONE; - huart3.Init.OverSampling = UART_OVERSAMPLING_16; - huart3.Init.OneBitSampling = UART_ONE_BIT_SAMPLE_DISABLE; - huart3.AdvancedInit.AdvFeatureInit = UART_ADVFEATURE_NO_INIT; - if (HAL_RS485Ex_Init(&huart3, UART_DE_POLARITY_HIGH, 0, 0) != HAL_OK) - { - Error_Handler(); - } - /* USER CODE BEGIN USART3_Init 2 */ + LL_DMA_SetPeriphIncMode(DMA1, LL_DMA_CHANNEL_6, LL_DMA_PERIPH_NOINCREMENT); - /* USER CODE END USART3_Init 2 */ + LL_DMA_SetMemoryIncMode(DMA1, LL_DMA_CHANNEL_6, LL_DMA_MEMORY_INCREMENT); -} + LL_DMA_SetPeriphSize(DMA1, LL_DMA_CHANNEL_6, LL_DMA_PDATAALIGN_BYTE); -void HAL_UART_MspInit(UART_HandleTypeDef* uartHandle) -{ + LL_DMA_SetMemorySize(DMA1, LL_DMA_CHANNEL_6, LL_DMA_MDATAALIGN_BYTE); + + /* USART2_TX Init */ + LL_DMA_SetDataTransferDirection(DMA1, LL_DMA_CHANNEL_7, LL_DMA_DIRECTION_MEMORY_TO_PERIPH); + + LL_DMA_SetChannelPriorityLevel(DMA1, LL_DMA_CHANNEL_7, LL_DMA_PRIORITY_LOW); + + LL_DMA_SetMode(DMA1, LL_DMA_CHANNEL_7, LL_DMA_MODE_NORMAL); + + LL_DMA_SetPeriphIncMode(DMA1, LL_DMA_CHANNEL_7, LL_DMA_PERIPH_NOINCREMENT); + + LL_DMA_SetMemoryIncMode(DMA1, LL_DMA_CHANNEL_7, LL_DMA_MEMORY_INCREMENT); + + LL_DMA_SetPeriphSize(DMA1, LL_DMA_CHANNEL_7, LL_DMA_PDATAALIGN_BYTE); + + LL_DMA_SetMemorySize(DMA1, LL_DMA_CHANNEL_7, LL_DMA_MDATAALIGN_BYTE); + + /* USER CODE BEGIN USART2_Init 1 */ + + /* USER CODE END USART2_Init 1 */ + USART_InitStruct.BaudRate = 5000000; + USART_InitStruct.DataWidth = LL_USART_DATAWIDTH_8B; + USART_InitStruct.StopBits = LL_USART_STOPBITS_1; + USART_InitStruct.Parity = LL_USART_PARITY_NONE; + USART_InitStruct.TransferDirection = LL_USART_DIRECTION_TX_RX; + USART_InitStruct.HardwareFlowControl = LL_USART_HWCONTROL_NONE; + USART_InitStruct.OverSampling = LL_USART_OVERSAMPLING_8; + LL_USART_Init(USART2, &USART_InitStruct); + LL_USART_EnableDEMode(USART2); + LL_USART_SetDESignalPolarity(USART2, LL_USART_DE_POLARITY_HIGH); + LL_USART_SetDEAssertionTime(USART2, 0); + LL_USART_SetDEDeassertionTime(USART2, 0); + LL_USART_ConfigAsyncMode(USART2); + LL_USART_Enable(USART2); + /* USER CODE BEGIN USART2_Init 2 */ + + /* USER CODE END USART2_Init 2 */ - GPIO_InitTypeDef GPIO_InitStruct = {0}; - if(uartHandle->Instance==USART2) - { - /* USER CODE BEGIN USART2_MspInit 0 */ - - /* USER CODE END USART2_MspInit 0 */ - /* USART2 clock enable */ - __HAL_RCC_USART2_CLK_ENABLE(); - - __HAL_RCC_GPIOA_CLK_ENABLE(); - /**USART2 GPIO Configuration - PA1 ------> USART2_DE - PA2 ------> USART2_TX - PA3 ------> USART2_RX - */ - GPIO_InitStruct.Pin = GPIO_PIN_1|GPIO_PIN_3; - GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; - GPIO_InitStruct.Pull = GPIO_NOPULL; - GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; - GPIO_InitStruct.Alternate = GPIO_AF7_USART2; - HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); - - GPIO_InitStruct.Pin = GPIO_PIN_2; - GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; - GPIO_InitStruct.Pull = GPIO_NOPULL; - GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW; - GPIO_InitStruct.Alternate = GPIO_AF7_USART2; - HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); - - /* USER CODE BEGIN USART2_MspInit 1 */ - - /* USER CODE END USART2_MspInit 1 */ - } - else if(uartHandle->Instance==USART3) - { - /* USER CODE BEGIN USART3_MspInit 0 */ - - /* USER CODE END USART3_MspInit 0 */ - /* USART3 clock enable */ - __HAL_RCC_USART3_CLK_ENABLE(); - - __HAL_RCC_GPIOB_CLK_ENABLE(); - /**USART3 GPIO Configuration - PB10 ------> USART3_TX - PB11 ------> USART3_RX - PB14 ------> USART3_DE - */ - GPIO_InitStruct.Pin = GPIO_PIN_10|GPIO_PIN_11|GPIO_PIN_14; - GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; - GPIO_InitStruct.Pull = GPIO_NOPULL; - GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; - GPIO_InitStruct.Alternate = GPIO_AF7_USART3; - HAL_GPIO_Init(GPIOB, &GPIO_InitStruct); - - /* USER CODE BEGIN USART3_MspInit 1 */ - - /* USER CODE END USART3_MspInit 1 */ - } } +/* USART3 init function */ -void HAL_UART_MspDeInit(UART_HandleTypeDef* uartHandle) +void MX_USART3_UART_Init(void) { - if(uartHandle->Instance==USART2) - { - /* USER CODE BEGIN USART2_MspDeInit 0 */ + /* USER CODE BEGIN USART3_Init 0 */ - /* USER CODE END USART2_MspDeInit 0 */ - /* Peripheral clock disable */ - __HAL_RCC_USART2_CLK_DISABLE(); + /* USER CODE END USART3_Init 0 */ - /**USART2 GPIO Configuration - PA1 ------> USART2_DE - PA2 ------> USART2_TX - PA3 ------> USART2_RX - */ - HAL_GPIO_DeInit(GPIOA, GPIO_PIN_1|GPIO_PIN_2|GPIO_PIN_3); + LL_USART_InitTypeDef USART_InitStruct = {0}; - /* USER CODE BEGIN USART2_MspDeInit 1 */ + LL_GPIO_InitTypeDef GPIO_InitStruct = {0}; - /* USER CODE END USART2_MspDeInit 1 */ - } - else if(uartHandle->Instance==USART3) - { - /* USER CODE BEGIN USART3_MspDeInit 0 */ + /* Peripheral clock enable */ + LL_APB1_GRP1_EnableClock(LL_APB1_GRP1_PERIPH_USART3); - /* USER CODE END USART3_MspDeInit 0 */ - /* Peripheral clock disable */ - __HAL_RCC_USART3_CLK_DISABLE(); + LL_AHB1_GRP1_EnableClock(LL_AHB1_GRP1_PERIPH_GPIOB); + /**USART3 GPIO Configuration + PB10 ------> USART3_TX + PB11 ------> USART3_RX + PB14 ------> USART3_DE + */ + GPIO_InitStruct.Pin = LL_GPIO_PIN_10|LL_GPIO_PIN_11|LL_GPIO_PIN_14; + GPIO_InitStruct.Mode = LL_GPIO_MODE_ALTERNATE; + GPIO_InitStruct.Speed = LL_GPIO_SPEED_FREQ_HIGH; + GPIO_InitStruct.OutputType = LL_GPIO_OUTPUT_PUSHPULL; + GPIO_InitStruct.Pull = LL_GPIO_PULL_NO; + GPIO_InitStruct.Alternate = LL_GPIO_AF_7; + LL_GPIO_Init(GPIOB, &GPIO_InitStruct); + + /* USER CODE BEGIN USART3_Init 1 */ - /**USART3 GPIO Configuration - PB10 ------> USART3_TX - PB11 ------> USART3_RX - PB14 ------> USART3_DE - */ - HAL_GPIO_DeInit(GPIOB, GPIO_PIN_10|GPIO_PIN_11|GPIO_PIN_14); + /* USER CODE END USART3_Init 1 */ + USART_InitStruct.BaudRate = 115200; + USART_InitStruct.DataWidth = LL_USART_DATAWIDTH_8B; + USART_InitStruct.StopBits = LL_USART_STOPBITS_1; + USART_InitStruct.Parity = LL_USART_PARITY_NONE; + USART_InitStruct.TransferDirection = LL_USART_DIRECTION_TX_RX; + USART_InitStruct.HardwareFlowControl = LL_USART_HWCONTROL_NONE; + USART_InitStruct.OverSampling = LL_USART_OVERSAMPLING_16; + LL_USART_Init(USART3, &USART_InitStruct); + LL_USART_EnableDEMode(USART3); + LL_USART_SetDESignalPolarity(USART3, LL_USART_DE_POLARITY_HIGH); + LL_USART_SetDEAssertionTime(USART3, 0); + LL_USART_SetDEDeassertionTime(USART3, 0); + LL_USART_ConfigAsyncMode(USART3); + LL_USART_Enable(USART3); + /* USER CODE BEGIN USART3_Init 2 */ - /* USER CODE BEGIN USART3_MspDeInit 1 */ + /* USER CODE END USART3_Init 2 */ - /* USER CODE END USART3_MspDeInit 1 */ - } } /* USER CODE BEGIN 1 */ diff --git a/Core/user/uart5_it.c b/Core/user/uart5_it.c index 5b7dca1..f0610fe 100644 --- a/Core/user/uart5_it.c +++ b/Core/user/uart5_it.c @@ -1,7 +1,7 @@ /***************************************************************************//** -* @file uart5_it.c -* @brief UART with interrupt and ring buffer -*//****************************************************************************/ + * @file uart5_it.c + * @brief UART with interrupt and ring buffer + *//****************************************************************************/ #include "uart5_it.h" @@ -11,9 +11,6 @@ #include "uart5_it_cfg.h" //------------------------------------------------------------------------------ - - - /* Private typedefs ----------------------------------------------------------*/ /* Private macros ------------------------------------------------------------*/ @@ -30,43 +27,38 @@ #error TX buffer size is not a power of 2! #endif - /* Private variables ---------------------------------------------------------*/ //====== Variables for transmitter ============================================= -static uint8_t Uart5TxBuf[UART5_TXBUF_SIZE]; -static uint16_t Uart5TxWrIdx = 0; +static uint8_t Uart5TxBuf[UART5_TXBUF_SIZE]; +static uint16_t Uart5TxWrIdx = 0; static volatile uint16_t Uart5TxRdIdx = 0; //====== Variables for Receiver ================================================ -static uint8_t Uart5RxBuf[UART5_RXBUF_SIZE]; +static uint8_t Uart5RxBuf[UART5_RXBUF_SIZE]; static volatile uint16_t Uart5RxWrIdx = 0; static volatile uint16_t Uart5RxRdIdx = 0; - /* Public variables ----------------------------------------------------------*/ - /* Functions -----------------------------------------------------------------*/ - /***************************************************************************//** -* @brief UART5 init -*//****************************************************************************/ + * @brief UART5 init + *//****************************************************************************/ void Uart5_Init(void) { - LL_USART_EnableIT_RXNE(UART5); //UART5->CR1 |= UART_CR1_RXNEIE; // Enable RX interrupt + LL_USART_EnableIT_RXNE(UART5); //UART5->CR1 |= UART_CR1_RXNEIE; // Enable RX interrupt } - /***************************************************************************//** -* @brief UART5 interrupt handler -*//****************************************************************************/ + * @brief UART5 interrupt handler + *//****************************************************************************/ void UART5_IRQHandler(void) { if (LL_USART_IsActiveFlag_RXNE(UART5)) { // RX interrupt uint8_t d = LL_USART_ReceiveData8(UART5); // read received byte uint_fast16_t wr = Uart5RxWrIdx; wr = (wr + 1) & UART5_RXBUF_MASK; // new write index - Uart5RxBuf[wr] = d; // received data to buffer + Uart5RxBuf[wr] = d; // received data to buffer Uart5RxWrIdx = wr; // Store new index } @@ -84,35 +76,33 @@ void UART5_IRQHandler(void) { } } - /***************************************************************************//** -* @brief Send byte to UART -* @param d: byte to send -*//****************************************************************************/ + * @brief Send byte to UART + * @param d: byte to send + *//****************************************************************************/ void Uart5_PutByte(uint8_t d) { uint_fast16_t wr = Uart5TxWrIdx; wr = (wr + 1) & UART5_TXBUF_MASK; // new write index if (wr == Uart5TxRdIdx) { // No free space in buffer (overflow) - return; // drop remaining data (Attention! Buffer overflow not signaled! Use bigger buffer) + return; // drop remaining data (Attention! Buffer overflow not signaled! Use bigger buffer) } Uart5TxBuf[wr] = d; // Store data in buffer Uart5TxWrIdx = wr; // Store new index LL_USART_EnableIT_TXE(UART5); // Interrupt enable (start send) } - /***************************************************************************//** -* @brief Send more data to UART -* @param src: data to send -* @param n: count of data -*//****************************************************************************/ -void Uart5_PutData (void* src, uint16_t n) { - uint8_t* p = src; + * @brief Send more data to UART + * @param src: data to send + * @param n: count of data + *//****************************************************************************/ +void Uart5_PutData(void *src, uint16_t n) { + uint8_t *p = src; uint_fast16_t wr = Uart5TxWrIdx; while (n) { wr = (wr + 1) & UART5_TXBUF_MASK; // new write index if (wr == Uart5TxRdIdx) { // No free space in buffer (overflow) - break; // drop remaining data (Attention! Buffer overflow not signaled! Use bigger buffer) + break; // drop remaining data (Attention! Buffer overflow not signaled! Use bigger buffer) } Uart5TxBuf[wr] = *p; // Store data in buffer p++; @@ -123,16 +113,16 @@ void Uart5_PutData (void* src, uint16_t n) { } /***************************************************************************//** -* @brief Read data from UART RX buffer -* @return received character, -1: no data in RX buffer -*//****************************************************************************/ + * @brief Read data from UART RX buffer + * @return received character, -1: no data in RX buffer + *//****************************************************************************/ int16_t Uart5_GetByte(void) { uint_fast16_t rd = Uart5RxRdIdx; if (rd != Uart5RxWrIdx) { // new data in buffer rd = (rd + 1) & UART5_RXBUF_MASK; // new read index Uart5RxRdIdx = rd; // store new index return Uart5RxBuf[rd]; // return with data - }else { + } else { return -1; // buffer empty } } diff --git a/Drivers/STM32F3xx_HAL_Driver/Inc/stm32f3xx_hal_uart.h b/Drivers/STM32F3xx_HAL_Driver/Inc/stm32f3xx_hal_uart.h deleted file mode 100644 index d57ae55..0000000 --- a/Drivers/STM32F3xx_HAL_Driver/Inc/stm32f3xx_hal_uart.h +++ /dev/null @@ -1,1588 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f3xx_hal_uart.h - * @author MCD Application Team - * @brief Header file of UART HAL module. - ****************************************************************************** - * @attention - * - * Copyright (c) 2016 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef STM32F3xx_HAL_UART_H -#define STM32F3xx_HAL_UART_H - -#ifdef __cplusplus -extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f3xx_hal_def.h" - -/** @addtogroup STM32F3xx_HAL_Driver - * @{ - */ - -/** @addtogroup UART - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ -/** @defgroup UART_Exported_Types UART Exported Types - * @{ - */ - -/** - * @brief UART Init Structure definition - */ -typedef struct -{ - uint32_t BaudRate; /*!< This member configures the UART communication baud rate. - The baud rate register is computed using the following formula: - - If oversampling is 16 or in LIN mode, - Baud Rate Register = ((uart_ker_ck) / ((huart->Init.BaudRate))) - - If oversampling is 8, - Baud Rate Register[15:4] = ((2 * uart_ker_ck) / - ((huart->Init.BaudRate)))[15:4] - Baud Rate Register[3] = 0 - Baud Rate Register[2:0] = (((2 * uart_ker_ck) / - ((huart->Init.BaudRate)))[3:0]) >> 1 - where uart_ker_ck is the UART input clock */ - - uint32_t WordLength; /*!< Specifies the number of data bits transmitted or received in a frame. - This parameter can be a value of @ref UARTEx_Word_Length. */ - - uint32_t StopBits; /*!< Specifies the number of stop bits transmitted. - This parameter can be a value of @ref UART_Stop_Bits. */ - - uint32_t Parity; /*!< Specifies the parity mode. - This parameter can be a value of @ref UART_Parity - @note When parity is enabled, the computed parity is inserted - at the MSB position of the transmitted data (9th bit when - the word length is set to 9 data bits; 8th bit when the - word length is set to 8 data bits). */ - - uint32_t Mode; /*!< Specifies whether the Receive or Transmit mode is enabled or disabled. - This parameter can be a value of @ref UART_Mode. */ - - uint32_t HwFlowCtl; /*!< Specifies whether the hardware flow control mode is enabled - or disabled. - This parameter can be a value of @ref UART_Hardware_Flow_Control. */ - - uint32_t OverSampling; /*!< Specifies whether the Over sampling 8 is enabled or disabled, - to achieve higher speed (up to f_PCLK/8). - This parameter can be a value of @ref UART_Over_Sampling. */ - - uint32_t OneBitSampling; /*!< Specifies whether a single sample or three samples' majority vote is selected. - Selecting the single sample method increases the receiver tolerance to clock - deviations. This parameter can be a value of @ref UART_OneBit_Sampling. */ - - -} UART_InitTypeDef; - -/** - * @brief UART Advanced Features initialization structure definition - */ -typedef struct -{ - uint32_t AdvFeatureInit; /*!< Specifies which advanced UART features is initialized. Several - Advanced Features may be initialized at the same time . - This parameter can be a value of - @ref UART_Advanced_Features_Initialization_Type. */ - - uint32_t TxPinLevelInvert; /*!< Specifies whether the TX pin active level is inverted. - This parameter can be a value of @ref UART_Tx_Inv. */ - - uint32_t RxPinLevelInvert; /*!< Specifies whether the RX pin active level is inverted. - This parameter can be a value of @ref UART_Rx_Inv. */ - - uint32_t DataInvert; /*!< Specifies whether data are inverted (positive/direct logic - vs negative/inverted logic). - This parameter can be a value of @ref UART_Data_Inv. */ - - uint32_t Swap; /*!< Specifies whether TX and RX pins are swapped. - This parameter can be a value of @ref UART_Rx_Tx_Swap. */ - - uint32_t OverrunDisable; /*!< Specifies whether the reception overrun detection is disabled. - This parameter can be a value of @ref UART_Overrun_Disable. */ - - uint32_t DMADisableonRxError; /*!< Specifies whether the DMA is disabled in case of reception error. - This parameter can be a value of @ref UART_DMA_Disable_on_Rx_Error. */ - - uint32_t AutoBaudRateEnable; /*!< Specifies whether auto Baud rate detection is enabled. - This parameter can be a value of @ref UART_AutoBaudRate_Enable. */ - - uint32_t AutoBaudRateMode; /*!< If auto Baud rate detection is enabled, specifies how the rate - detection is carried out. - This parameter can be a value of @ref UART_AutoBaud_Rate_Mode. */ - - uint32_t MSBFirst; /*!< Specifies whether MSB is sent first on UART line. - This parameter can be a value of @ref UART_MSB_First. */ -} UART_AdvFeatureInitTypeDef; - -/** - * @brief HAL UART State definition - * @note HAL UART State value is a combination of 2 different substates: - * gState and RxState (see @ref UART_State_Definition). - * - gState contains UART state information related to global Handle management - * and also information related to Tx operations. - * gState value coding follow below described bitmap : - * b7-b6 Error information - * 00 : No Error - * 01 : (Not Used) - * 10 : Timeout - * 11 : Error - * b5 Peripheral initialization status - * 0 : Reset (Peripheral not initialized) - * 1 : Init done (Peripheral initialized. HAL UART Init function already called) - * b4-b3 (not used) - * xx : Should be set to 00 - * b2 Intrinsic process state - * 0 : Ready - * 1 : Busy (Peripheral busy with some configuration or internal operations) - * b1 (not used) - * x : Should be set to 0 - * b0 Tx state - * 0 : Ready (no Tx operation ongoing) - * 1 : Busy (Tx operation ongoing) - * - RxState contains information related to Rx operations. - * RxState value coding follow below described bitmap : - * b7-b6 (not used) - * xx : Should be set to 00 - * b5 Peripheral initialization status - * 0 : Reset (Peripheral not initialized) - * 1 : Init done (Peripheral initialized) - * b4-b2 (not used) - * xxx : Should be set to 000 - * b1 Rx state - * 0 : Ready (no Rx operation ongoing) - * 1 : Busy (Rx operation ongoing) - * b0 (not used) - * x : Should be set to 0. - */ -typedef uint32_t HAL_UART_StateTypeDef; - -/** - * @brief UART clock sources definition - */ -typedef enum -{ - UART_CLOCKSOURCE_PCLK1 = 0x00U, /*!< PCLK1 clock source */ - UART_CLOCKSOURCE_PCLK2 = 0x01U, /*!< PCLK2 clock source */ - UART_CLOCKSOURCE_HSI = 0x02U, /*!< HSI clock source */ - UART_CLOCKSOURCE_SYSCLK = 0x04U, /*!< SYSCLK clock source */ - UART_CLOCKSOURCE_LSE = 0x08U, /*!< LSE clock source */ - UART_CLOCKSOURCE_UNDEFINED = 0x10U /*!< Undefined clock source */ -} UART_ClockSourceTypeDef; - -/** - * @brief HAL UART Reception type definition - * @note HAL UART Reception type value aims to identify which type of Reception is ongoing. - * This parameter can be a value of @ref UART_Reception_Type_Values : - * HAL_UART_RECEPTION_STANDARD = 0x00U, - * HAL_UART_RECEPTION_TOIDLE = 0x01U, - * HAL_UART_RECEPTION_TORTO = 0x02U, - * HAL_UART_RECEPTION_TOCHARMATCH = 0x03U, - */ -typedef uint32_t HAL_UART_RxTypeTypeDef; - -/** - * @brief HAL UART Rx Event type definition - * @note HAL UART Rx Event type value aims to identify which type of Event has occurred - * leading to call of the RxEvent callback. - * This parameter can be a value of @ref UART_RxEvent_Type_Values : - * HAL_UART_RXEVENT_TC = 0x00U, - * HAL_UART_RXEVENT_HT = 0x01U, - * HAL_UART_RXEVENT_IDLE = 0x02U, - */ -typedef uint32_t HAL_UART_RxEventTypeTypeDef; - -/** - * @brief UART handle Structure definition - */ -typedef struct __UART_HandleTypeDef -{ - USART_TypeDef *Instance; /*!< UART registers base address */ - - UART_InitTypeDef Init; /*!< UART communication parameters */ - - UART_AdvFeatureInitTypeDef AdvancedInit; /*!< UART Advanced Features initialization parameters */ - - const uint8_t *pTxBuffPtr; /*!< Pointer to UART Tx transfer Buffer */ - - uint16_t TxXferSize; /*!< UART Tx Transfer size */ - - __IO uint16_t TxXferCount; /*!< UART Tx Transfer Counter */ - - uint8_t *pRxBuffPtr; /*!< Pointer to UART Rx transfer Buffer */ - - uint16_t RxXferSize; /*!< UART Rx Transfer size */ - - __IO uint16_t RxXferCount; /*!< UART Rx Transfer Counter */ - - uint16_t Mask; /*!< UART Rx RDR register mask */ - - __IO HAL_UART_RxTypeTypeDef ReceptionType; /*!< Type of ongoing reception */ - - __IO HAL_UART_RxEventTypeTypeDef RxEventType; /*!< Type of Rx Event */ - - void (*RxISR)(struct __UART_HandleTypeDef *huart); /*!< Function pointer on Rx IRQ handler */ - - void (*TxISR)(struct __UART_HandleTypeDef *huart); /*!< Function pointer on Tx IRQ handler */ - - DMA_HandleTypeDef *hdmatx; /*!< UART Tx DMA Handle parameters */ - - DMA_HandleTypeDef *hdmarx; /*!< UART Rx DMA Handle parameters */ - - HAL_LockTypeDef Lock; /*!< Locking object */ - - __IO HAL_UART_StateTypeDef gState; /*!< UART state information related to global Handle management - and also related to Tx operations. This parameter - can be a value of @ref HAL_UART_StateTypeDef */ - - __IO HAL_UART_StateTypeDef RxState; /*!< UART state information related to Rx operations. This - parameter can be a value of @ref HAL_UART_StateTypeDef */ - - __IO uint32_t ErrorCode; /*!< UART Error code */ - -#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) - void (* TxHalfCpltCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Tx Half Complete Callback */ - void (* TxCpltCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Tx Complete Callback */ - void (* RxHalfCpltCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Rx Half Complete Callback */ - void (* RxCpltCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Rx Complete Callback */ - void (* ErrorCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Error Callback */ - void (* AbortCpltCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Abort Complete Callback */ - void (* AbortTransmitCpltCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Abort Transmit Complete Callback */ - void (* AbortReceiveCpltCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Abort Receive Complete Callback */ - void (* WakeupCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Wakeup Callback */ - void (* RxEventCallback)(struct __UART_HandleTypeDef *huart, uint16_t Pos); /*!< UART Reception Event Callback */ - - void (* MspInitCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Msp Init callback */ - void (* MspDeInitCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Msp DeInit callback */ -#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ - -} UART_HandleTypeDef; - -#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) -/** - * @brief HAL UART Callback ID enumeration definition - */ -typedef enum -{ - HAL_UART_TX_HALFCOMPLETE_CB_ID = 0x00U, /*!< UART Tx Half Complete Callback ID */ - HAL_UART_TX_COMPLETE_CB_ID = 0x01U, /*!< UART Tx Complete Callback ID */ - HAL_UART_RX_HALFCOMPLETE_CB_ID = 0x02U, /*!< UART Rx Half Complete Callback ID */ - HAL_UART_RX_COMPLETE_CB_ID = 0x03U, /*!< UART Rx Complete Callback ID */ - HAL_UART_ERROR_CB_ID = 0x04U, /*!< UART Error Callback ID */ - HAL_UART_ABORT_COMPLETE_CB_ID = 0x05U, /*!< UART Abort Complete Callback ID */ - HAL_UART_ABORT_TRANSMIT_COMPLETE_CB_ID = 0x06U, /*!< UART Abort Transmit Complete Callback ID */ - HAL_UART_ABORT_RECEIVE_COMPLETE_CB_ID = 0x07U, /*!< UART Abort Receive Complete Callback ID */ - HAL_UART_WAKEUP_CB_ID = 0x08U, /*!< UART Wakeup Callback ID */ - - HAL_UART_MSPINIT_CB_ID = 0x0BU, /*!< UART MspInit callback ID */ - HAL_UART_MSPDEINIT_CB_ID = 0x0CU /*!< UART MspDeInit callback ID */ - -} HAL_UART_CallbackIDTypeDef; - -/** - * @brief HAL UART Callback pointer definition - */ -typedef void (*pUART_CallbackTypeDef)(UART_HandleTypeDef *huart); /*!< pointer to an UART callback function */ -typedef void (*pUART_RxEventCallbackTypeDef) -(struct __UART_HandleTypeDef *huart, uint16_t Pos); /*!< pointer to a UART Rx Event specific callback function */ - -#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ - -/** - * @} - */ - -/* Exported constants --------------------------------------------------------*/ -/** @defgroup UART_Exported_Constants UART Exported Constants - * @{ - */ - -/** @defgroup UART_State_Definition UART State Code Definition - * @{ - */ -#define HAL_UART_STATE_RESET 0x00000000U /*!< Peripheral is not initialized - Value is allowed for gState and RxState */ -#define HAL_UART_STATE_READY 0x00000020U /*!< Peripheral Initialized and ready for use - Value is allowed for gState and RxState */ -#define HAL_UART_STATE_BUSY 0x00000024U /*!< an internal process is ongoing - Value is allowed for gState only */ -#define HAL_UART_STATE_BUSY_TX 0x00000021U /*!< Data Transmission process is ongoing - Value is allowed for gState only */ -#define HAL_UART_STATE_BUSY_RX 0x00000022U /*!< Data Reception process is ongoing - Value is allowed for RxState only */ -#define HAL_UART_STATE_BUSY_TX_RX 0x00000023U /*!< Data Transmission and Reception process is ongoing - Not to be used for neither gState nor RxState.Value is result - of combination (Or) between gState and RxState values */ -#define HAL_UART_STATE_TIMEOUT 0x000000A0U /*!< Timeout state - Value is allowed for gState only */ -#define HAL_UART_STATE_ERROR 0x000000E0U /*!< Error - Value is allowed for gState only */ -/** - * @} - */ - -/** @defgroup UART_Error_Definition UART Error Definition - * @{ - */ -#define HAL_UART_ERROR_NONE (0x00000000U) /*!< No error */ -#define HAL_UART_ERROR_PE (0x00000001U) /*!< Parity error */ -#define HAL_UART_ERROR_NE (0x00000002U) /*!< Noise error */ -#define HAL_UART_ERROR_FE (0x00000004U) /*!< Frame error */ -#define HAL_UART_ERROR_ORE (0x00000008U) /*!< Overrun error */ -#define HAL_UART_ERROR_DMA (0x00000010U) /*!< DMA transfer error */ -#define HAL_UART_ERROR_RTO (0x00000020U) /*!< Receiver Timeout error */ - -#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) -#define HAL_UART_ERROR_INVALID_CALLBACK (0x00000040U) /*!< Invalid Callback error */ -#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ -/** - * @} - */ - -/** @defgroup UART_Stop_Bits UART Number of Stop Bits - * @{ - */ -#define UART_STOPBITS_0_5 USART_CR2_STOP_0 /*!< UART frame with 0.5 stop bit */ -#define UART_STOPBITS_1 0x00000000U /*!< UART frame with 1 stop bit */ -#define UART_STOPBITS_1_5 (USART_CR2_STOP_0 | USART_CR2_STOP_1) /*!< UART frame with 1.5 stop bits */ -#define UART_STOPBITS_2 USART_CR2_STOP_1 /*!< UART frame with 2 stop bits */ -/** - * @} - */ - -/** @defgroup UART_Parity UART Parity - * @{ - */ -#define UART_PARITY_NONE 0x00000000U /*!< No parity */ -#define UART_PARITY_EVEN USART_CR1_PCE /*!< Even parity */ -#define UART_PARITY_ODD (USART_CR1_PCE | USART_CR1_PS) /*!< Odd parity */ -/** - * @} - */ - -/** @defgroup UART_Hardware_Flow_Control UART Hardware Flow Control - * @{ - */ -#define UART_HWCONTROL_NONE 0x00000000U /*!< No hardware control */ -#define UART_HWCONTROL_RTS USART_CR3_RTSE /*!< Request To Send */ -#define UART_HWCONTROL_CTS USART_CR3_CTSE /*!< Clear To Send */ -#define UART_HWCONTROL_RTS_CTS (USART_CR3_RTSE | USART_CR3_CTSE) /*!< Request and Clear To Send */ -/** - * @} - */ - -/** @defgroup UART_Mode UART Transfer Mode - * @{ - */ -#define UART_MODE_RX USART_CR1_RE /*!< RX mode */ -#define UART_MODE_TX USART_CR1_TE /*!< TX mode */ -#define UART_MODE_TX_RX (USART_CR1_TE |USART_CR1_RE) /*!< RX and TX mode */ -/** - * @} - */ - -/** @defgroup UART_State UART State - * @{ - */ -#define UART_STATE_DISABLE 0x00000000U /*!< UART disabled */ -#define UART_STATE_ENABLE USART_CR1_UE /*!< UART enabled */ -/** - * @} - */ - -/** @defgroup UART_Over_Sampling UART Over Sampling - * @{ - */ -#define UART_OVERSAMPLING_16 0x00000000U /*!< Oversampling by 16 */ -#define UART_OVERSAMPLING_8 USART_CR1_OVER8 /*!< Oversampling by 8 */ -/** - * @} - */ - -/** @defgroup UART_OneBit_Sampling UART One Bit Sampling Method - * @{ - */ -#define UART_ONE_BIT_SAMPLE_DISABLE 0x00000000U /*!< One-bit sampling disable */ -#define UART_ONE_BIT_SAMPLE_ENABLE USART_CR3_ONEBIT /*!< One-bit sampling enable */ -/** - * @} - */ - -/** @defgroup UART_AutoBaud_Rate_Mode UART Advanced Feature AutoBaud Rate Mode - * @{ - */ -#define UART_ADVFEATURE_AUTOBAUDRATE_ONSTARTBIT 0x00000000U /*!< Auto Baud rate detection - on start bit */ -#define UART_ADVFEATURE_AUTOBAUDRATE_ONFALLINGEDGE USART_CR2_ABRMODE_0 /*!< Auto Baud rate detection - on falling edge */ -#define UART_ADVFEATURE_AUTOBAUDRATE_ON0X7FFRAME USART_CR2_ABRMODE_1 /*!< Auto Baud rate detection - on 0x7F frame detection */ -#define UART_ADVFEATURE_AUTOBAUDRATE_ON0X55FRAME USART_CR2_ABRMODE /*!< Auto Baud rate detection - on 0x55 frame detection */ -/** - * @} - */ - -/** @defgroup UART_Receiver_Timeout UART Receiver Timeout - * @{ - */ -#define UART_RECEIVER_TIMEOUT_DISABLE 0x00000000U /*!< UART Receiver Timeout disable */ -#define UART_RECEIVER_TIMEOUT_ENABLE USART_CR2_RTOEN /*!< UART Receiver Timeout enable */ -/** - * @} - */ - -/** @defgroup UART_LIN UART Local Interconnection Network mode - * @{ - */ -#define UART_LIN_DISABLE 0x00000000U /*!< Local Interconnect Network disable */ -#define UART_LIN_ENABLE USART_CR2_LINEN /*!< Local Interconnect Network enable */ -/** - * @} - */ - -/** @defgroup UART_LIN_Break_Detection UART LIN Break Detection - * @{ - */ -#define UART_LINBREAKDETECTLENGTH_10B 0x00000000U /*!< LIN 10-bit break detection length */ -#define UART_LINBREAKDETECTLENGTH_11B USART_CR2_LBDL /*!< LIN 11-bit break detection length */ -/** - * @} - */ - -/** @defgroup UART_DMA_Tx UART DMA Tx - * @{ - */ -#define UART_DMA_TX_DISABLE 0x00000000U /*!< UART DMA TX disabled */ -#define UART_DMA_TX_ENABLE USART_CR3_DMAT /*!< UART DMA TX enabled */ -/** - * @} - */ - -/** @defgroup UART_DMA_Rx UART DMA Rx - * @{ - */ -#define UART_DMA_RX_DISABLE 0x00000000U /*!< UART DMA RX disabled */ -#define UART_DMA_RX_ENABLE USART_CR3_DMAR /*!< UART DMA RX enabled */ -/** - * @} - */ - -/** @defgroup UART_Half_Duplex_Selection UART Half Duplex Selection - * @{ - */ -#define UART_HALF_DUPLEX_DISABLE 0x00000000U /*!< UART half-duplex disabled */ -#define UART_HALF_DUPLEX_ENABLE USART_CR3_HDSEL /*!< UART half-duplex enabled */ -/** - * @} - */ - -/** @defgroup UART_WakeUp_Methods UART WakeUp Methods - * @{ - */ -#define UART_WAKEUPMETHOD_IDLELINE 0x00000000U /*!< UART wake-up on idle line */ -#define UART_WAKEUPMETHOD_ADDRESSMARK USART_CR1_WAKE /*!< UART wake-up on address mark */ -/** - * @} - */ - -/** @defgroup UART_Request_Parameters UART Request Parameters - * @{ - */ -#define UART_AUTOBAUD_REQUEST USART_RQR_ABRRQ /*!< Auto-Baud Rate Request */ -#define UART_SENDBREAK_REQUEST USART_RQR_SBKRQ /*!< Send Break Request */ -#define UART_MUTE_MODE_REQUEST USART_RQR_MMRQ /*!< Mute Mode Request */ -#define UART_RXDATA_FLUSH_REQUEST USART_RQR_RXFRQ /*!< Receive Data flush Request */ -#define UART_TXDATA_FLUSH_REQUEST USART_RQR_TXFRQ /*!< Transmit data flush Request */ -/** - * @} - */ - -/** @defgroup UART_Advanced_Features_Initialization_Type UART Advanced Feature Initialization Type - * @{ - */ -#define UART_ADVFEATURE_NO_INIT 0x00000000U /*!< No advanced feature initialization */ -#define UART_ADVFEATURE_TXINVERT_INIT 0x00000001U /*!< TX pin active level inversion */ -#define UART_ADVFEATURE_RXINVERT_INIT 0x00000002U /*!< RX pin active level inversion */ -#define UART_ADVFEATURE_DATAINVERT_INIT 0x00000004U /*!< Binary data inversion */ -#define UART_ADVFEATURE_SWAP_INIT 0x00000008U /*!< TX/RX pins swap */ -#define UART_ADVFEATURE_RXOVERRUNDISABLE_INIT 0x00000010U /*!< RX overrun disable */ -#define UART_ADVFEATURE_DMADISABLEONERROR_INIT 0x00000020U /*!< DMA disable on Reception Error */ -#define UART_ADVFEATURE_AUTOBAUDRATE_INIT 0x00000040U /*!< Auto Baud rate detection initialization */ -#define UART_ADVFEATURE_MSBFIRST_INIT 0x00000080U /*!< Most significant bit sent/received first */ -/** - * @} - */ - -/** @defgroup UART_Tx_Inv UART Advanced Feature TX Pin Active Level Inversion - * @{ - */ -#define UART_ADVFEATURE_TXINV_DISABLE 0x00000000U /*!< TX pin active level inversion disable */ -#define UART_ADVFEATURE_TXINV_ENABLE USART_CR2_TXINV /*!< TX pin active level inversion enable */ -/** - * @} - */ - -/** @defgroup UART_Rx_Inv UART Advanced Feature RX Pin Active Level Inversion - * @{ - */ -#define UART_ADVFEATURE_RXINV_DISABLE 0x00000000U /*!< RX pin active level inversion disable */ -#define UART_ADVFEATURE_RXINV_ENABLE USART_CR2_RXINV /*!< RX pin active level inversion enable */ -/** - * @} - */ - -/** @defgroup UART_Data_Inv UART Advanced Feature Binary Data Inversion - * @{ - */ -#define UART_ADVFEATURE_DATAINV_DISABLE 0x00000000U /*!< Binary data inversion disable */ -#define UART_ADVFEATURE_DATAINV_ENABLE USART_CR2_DATAINV /*!< Binary data inversion enable */ -/** - * @} - */ - -/** @defgroup UART_Rx_Tx_Swap UART Advanced Feature RX TX Pins Swap - * @{ - */ -#define UART_ADVFEATURE_SWAP_DISABLE 0x00000000U /*!< TX/RX pins swap disable */ -#define UART_ADVFEATURE_SWAP_ENABLE USART_CR2_SWAP /*!< TX/RX pins swap enable */ -/** - * @} - */ - -/** @defgroup UART_Overrun_Disable UART Advanced Feature Overrun Disable - * @{ - */ -#define UART_ADVFEATURE_OVERRUN_ENABLE 0x00000000U /*!< RX overrun enable */ -#define UART_ADVFEATURE_OVERRUN_DISABLE USART_CR3_OVRDIS /*!< RX overrun disable */ -/** - * @} - */ - -/** @defgroup UART_AutoBaudRate_Enable UART Advanced Feature Auto BaudRate Enable - * @{ - */ -#define UART_ADVFEATURE_AUTOBAUDRATE_DISABLE 0x00000000U /*!< RX Auto Baud rate detection enable */ -#define UART_ADVFEATURE_AUTOBAUDRATE_ENABLE USART_CR2_ABREN /*!< RX Auto Baud rate detection disable */ -/** - * @} - */ - -/** @defgroup UART_DMA_Disable_on_Rx_Error UART Advanced Feature DMA Disable On Rx Error - * @{ - */ -#define UART_ADVFEATURE_DMA_ENABLEONRXERROR 0x00000000U /*!< DMA enable on Reception Error */ -#define UART_ADVFEATURE_DMA_DISABLEONRXERROR USART_CR3_DDRE /*!< DMA disable on Reception Error */ -/** - * @} - */ - -/** @defgroup UART_MSB_First UART Advanced Feature MSB First - * @{ - */ -#define UART_ADVFEATURE_MSBFIRST_DISABLE 0x00000000U /*!< Most significant bit sent/received - first disable */ -#define UART_ADVFEATURE_MSBFIRST_ENABLE USART_CR2_MSBFIRST /*!< Most significant bit sent/received - first enable */ -/** - * @} - */ - -/** @defgroup UART_Stop_Mode_Enable UART Advanced Feature Stop Mode Enable - * @{ - */ -#define UART_ADVFEATURE_STOPMODE_DISABLE 0x00000000U /*!< UART stop mode disable */ -#define UART_ADVFEATURE_STOPMODE_ENABLE USART_CR1_UESM /*!< UART stop mode enable */ -/** - * @} - */ - -/** @defgroup UART_Mute_Mode UART Advanced Feature Mute Mode Enable - * @{ - */ -#define UART_ADVFEATURE_MUTEMODE_DISABLE 0x00000000U /*!< UART mute mode disable */ -#define UART_ADVFEATURE_MUTEMODE_ENABLE USART_CR1_MME /*!< UART mute mode enable */ -/** - * @} - */ - -/** @defgroup UART_CR2_ADDRESS_LSB_POS UART Address-matching LSB Position In CR2 Register - * @{ - */ -#define UART_CR2_ADDRESS_LSB_POS 24U /*!< UART address-matching LSB position in CR2 register */ -/** - * @} - */ - -/** @defgroup UART_WakeUp_from_Stop_Selection UART WakeUp From Stop Selection - * @{ - */ -#define UART_WAKEUP_ON_ADDRESS 0x00000000U /*!< UART wake-up on address */ -#define UART_WAKEUP_ON_STARTBIT USART_CR3_WUS_1 /*!< UART wake-up on start bit */ -#define UART_WAKEUP_ON_READDATA_NONEMPTY USART_CR3_WUS /*!< UART wake-up on receive data register - not empty or RXFIFO is not empty */ -/** - * @} - */ - -/** @defgroup UART_DriverEnable_Polarity UART DriverEnable Polarity - * @{ - */ -#define UART_DE_POLARITY_HIGH 0x00000000U /*!< Driver enable signal is active high */ -#define UART_DE_POLARITY_LOW USART_CR3_DEP /*!< Driver enable signal is active low */ -/** - * @} - */ - -/** @defgroup UART_CR1_DEAT_ADDRESS_LSB_POS UART Driver Enable Assertion Time LSB Position In CR1 Register - * @{ - */ -#define UART_CR1_DEAT_ADDRESS_LSB_POS 21U /*!< UART Driver Enable assertion time LSB - position in CR1 register */ -/** - * @} - */ - -/** @defgroup UART_CR1_DEDT_ADDRESS_LSB_POS UART Driver Enable DeAssertion Time LSB Position In CR1 Register - * @{ - */ -#define UART_CR1_DEDT_ADDRESS_LSB_POS 16U /*!< UART Driver Enable de-assertion time LSB - position in CR1 register */ -/** - * @} - */ - -/** @defgroup UART_Interruption_Mask UART Interruptions Flag Mask - * @{ - */ -#define UART_IT_MASK 0x001FU /*!< UART interruptions flags mask */ -/** - * @} - */ - -/** @defgroup UART_TimeOut_Value UART polling-based communications time-out value - * @{ - */ -#define HAL_UART_TIMEOUT_VALUE 0x1FFFFFFU /*!< UART polling-based communications time-out value */ -/** - * @} - */ - -/** @defgroup UART_Flags UART Status Flags - * Elements values convention: 0xXXXX - * - 0xXXXX : Flag mask in the ISR register - * @{ - */ -#define UART_FLAG_REACK USART_ISR_REACK /*!< UART receive enable acknowledge flag */ -#define UART_FLAG_TEACK USART_ISR_TEACK /*!< UART transmit enable acknowledge flag */ -#define UART_FLAG_WUF USART_ISR_WUF /*!< UART wake-up from stop mode flag */ -#define UART_FLAG_RWU USART_ISR_RWU /*!< UART receiver wake-up from mute mode flag */ -#define UART_FLAG_SBKF USART_ISR_SBKF /*!< UART send break flag */ -#define UART_FLAG_CMF USART_ISR_CMF /*!< UART character match flag */ -#define UART_FLAG_BUSY USART_ISR_BUSY /*!< UART busy flag */ -#define UART_FLAG_ABRF USART_ISR_ABRF /*!< UART auto Baud rate flag */ -#define UART_FLAG_ABRE USART_ISR_ABRE /*!< UART auto Baud rate error */ -#define UART_FLAG_RTOF USART_ISR_RTOF /*!< UART receiver timeout flag */ -#define UART_FLAG_CTS USART_ISR_CTS /*!< UART clear to send flag */ -#define UART_FLAG_CTSIF USART_ISR_CTSIF /*!< UART clear to send interrupt flag */ -#define UART_FLAG_LBDF USART_ISR_LBDF /*!< UART LIN break detection flag */ -#define UART_FLAG_TXE USART_ISR_TXE /*!< UART transmit data register empty */ -#define UART_FLAG_TC USART_ISR_TC /*!< UART transmission complete */ -#define UART_FLAG_RXNE USART_ISR_RXNE /*!< UART read data register not empty */ -#define UART_FLAG_IDLE USART_ISR_IDLE /*!< UART idle flag */ -#define UART_FLAG_ORE USART_ISR_ORE /*!< UART overrun error */ -#define UART_FLAG_NE USART_ISR_NE /*!< UART noise error */ -#define UART_FLAG_FE USART_ISR_FE /*!< UART frame error */ -#define UART_FLAG_PE USART_ISR_PE /*!< UART parity error */ -/** - * @} - */ - -/** @defgroup UART_Interrupt_definition UART Interrupts Definition - * Elements values convention: 000ZZZZZ0XXYYYYYb - * - YYYYY : Interrupt source position in the XX register (5bits) - * - XX : Interrupt source register (2bits) - * - 01: CR1 register - * - 10: CR2 register - * - 11: CR3 register - * - ZZZZZ : Flag position in the ISR register(5bits) - * Elements values convention: 000000000XXYYYYYb - * - YYYYY : Interrupt source position in the XX register (5bits) - * - XX : Interrupt source register (2bits) - * - 01: CR1 register - * - 10: CR2 register - * - 11: CR3 register - * Elements values convention: 0000ZZZZ00000000b - * - ZZZZ : Flag position in the ISR register(4bits) - * @{ - */ -#define UART_IT_PE 0x0028U /*!< UART parity error interruption */ -#define UART_IT_TXE 0x0727U /*!< UART transmit data register empty interruption */ -#define UART_IT_TC 0x0626U /*!< UART transmission complete interruption */ -#define UART_IT_RXNE 0x0525U /*!< UART read data register not empty interruption */ -#define UART_IT_IDLE 0x0424U /*!< UART idle interruption */ -#define UART_IT_LBD 0x0846U /*!< UART LIN break detection interruption */ -#define UART_IT_CTS 0x096AU /*!< UART CTS interruption */ -#define UART_IT_CM 0x112EU /*!< UART character match interruption */ -#define UART_IT_WUF 0x1476U /*!< UART wake-up from stop mode interruption */ -#define UART_IT_RTO 0x0B3AU /*!< UART receiver timeout interruption */ - -#define UART_IT_ERR 0x0060U /*!< UART error interruption */ - -#define UART_IT_ORE 0x0300U /*!< UART overrun error interruption */ -#define UART_IT_NE 0x0200U /*!< UART noise error interruption */ -#define UART_IT_FE 0x0100U /*!< UART frame error interruption */ -/** - * @} - */ - -/** @defgroup UART_IT_CLEAR_Flags UART Interruption Clear Flags - * @{ - */ -#define UART_CLEAR_PEF USART_ICR_PECF /*!< Parity Error Clear Flag */ -#define UART_CLEAR_FEF USART_ICR_FECF /*!< Framing Error Clear Flag */ -#define UART_CLEAR_NEF USART_ICR_NCF /*!< Noise Error detected Clear Flag */ -#define UART_CLEAR_OREF USART_ICR_ORECF /*!< Overrun Error Clear Flag */ -#define UART_CLEAR_IDLEF USART_ICR_IDLECF /*!< IDLE line detected Clear Flag */ -#define UART_CLEAR_TCF USART_ICR_TCCF /*!< Transmission Complete Clear Flag */ -#define UART_CLEAR_LBDF USART_ICR_LBDCF /*!< LIN Break Detection Clear Flag */ -#define UART_CLEAR_CTSF USART_ICR_CTSCF /*!< CTS Interrupt Clear Flag */ -#define UART_CLEAR_CMF USART_ICR_CMCF /*!< Character Match Clear Flag */ -#define UART_CLEAR_WUF USART_ICR_WUCF /*!< Wake Up from stop mode Clear Flag */ -#define UART_CLEAR_RTOF USART_ICR_RTOCF /*!< UART receiver timeout clear flag */ -/** - * @} - */ - -/** @defgroup UART_Reception_Type_Values UART Reception type values - * @{ - */ -#define HAL_UART_RECEPTION_STANDARD (0x00000000U) /*!< Standard reception */ -#define HAL_UART_RECEPTION_TOIDLE (0x00000001U) /*!< Reception till completion or IDLE event */ -#define HAL_UART_RECEPTION_TORTO (0x00000002U) /*!< Reception till completion or RTO event */ -#define HAL_UART_RECEPTION_TOCHARMATCH (0x00000003U) /*!< Reception till completion or CM event */ -/** - * @} - */ - -/** @defgroup UART_RxEvent_Type_Values UART RxEvent type values - * @{ - */ -#define HAL_UART_RXEVENT_TC (0x00000000U) /*!< RxEvent linked to Transfer Complete event */ -#define HAL_UART_RXEVENT_HT (0x00000001U) /*!< RxEvent linked to Half Transfer event */ -#define HAL_UART_RXEVENT_IDLE (0x00000002U) /*!< RxEvent linked to IDLE event */ -/** - * @} - */ - -/** - * @} - */ - -/* Exported macros -----------------------------------------------------------*/ -/** @defgroup UART_Exported_Macros UART Exported Macros - * @{ - */ - -/** @brief Reset UART handle states. - * @param __HANDLE__ UART handle. - * @retval None - */ -#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) -#define __HAL_UART_RESET_HANDLE_STATE(__HANDLE__) do{ \ - (__HANDLE__)->gState = HAL_UART_STATE_RESET; \ - (__HANDLE__)->RxState = HAL_UART_STATE_RESET; \ - (__HANDLE__)->MspInitCallback = NULL; \ - (__HANDLE__)->MspDeInitCallback = NULL; \ - } while(0U) -#else -#define __HAL_UART_RESET_HANDLE_STATE(__HANDLE__) do{ \ - (__HANDLE__)->gState = HAL_UART_STATE_RESET; \ - (__HANDLE__)->RxState = HAL_UART_STATE_RESET; \ - } while(0U) -#endif /*USE_HAL_UART_REGISTER_CALLBACKS */ - -/** @brief Flush the UART Data registers. - * @param __HANDLE__ specifies the UART Handle. - * @retval None - */ -#define __HAL_UART_FLUSH_DRREGISTER(__HANDLE__) \ - do{ \ - SET_BIT((__HANDLE__)->Instance->RQR, UART_RXDATA_FLUSH_REQUEST); \ - SET_BIT((__HANDLE__)->Instance->RQR, UART_TXDATA_FLUSH_REQUEST); \ - } while(0U) - -/** @brief Clear the specified UART pending flag. - * @param __HANDLE__ specifies the UART Handle. - * @param __FLAG__ specifies the flag to check. - * This parameter can be any combination of the following values: - * @arg @ref UART_CLEAR_PEF Parity Error Clear Flag - * @arg @ref UART_CLEAR_FEF Framing Error Clear Flag - * @arg @ref UART_CLEAR_NEF Noise detected Clear Flag - * @arg @ref UART_CLEAR_OREF Overrun Error Clear Flag - * @arg @ref UART_CLEAR_IDLEF IDLE line detected Clear Flag - * @arg @ref UART_CLEAR_TCF Transmission Complete Clear Flag - * @arg @ref UART_CLEAR_RTOF Receiver Timeout clear flag - * @arg @ref UART_CLEAR_LBDF LIN Break Detection Clear Flag - * @arg @ref UART_CLEAR_CTSF CTS Interrupt Clear Flag - * @arg @ref UART_CLEAR_CMF Character Match Clear Flag - * @arg @ref UART_CLEAR_WUF Wake Up from stop mode Clear Flag - * @retval None - */ -#define __HAL_UART_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ICR = (__FLAG__)) - -/** @brief Clear the UART PE pending flag. - * @param __HANDLE__ specifies the UART Handle. - * @retval None - */ -#define __HAL_UART_CLEAR_PEFLAG(__HANDLE__) __HAL_UART_CLEAR_FLAG((__HANDLE__), UART_CLEAR_PEF) - -/** @brief Clear the UART FE pending flag. - * @param __HANDLE__ specifies the UART Handle. - * @retval None - */ -#define __HAL_UART_CLEAR_FEFLAG(__HANDLE__) __HAL_UART_CLEAR_FLAG((__HANDLE__), UART_CLEAR_FEF) - -/** @brief Clear the UART NE pending flag. - * @param __HANDLE__ specifies the UART Handle. - * @retval None - */ -#define __HAL_UART_CLEAR_NEFLAG(__HANDLE__) __HAL_UART_CLEAR_FLAG((__HANDLE__), UART_CLEAR_NEF) - -/** @brief Clear the UART ORE pending flag. - * @param __HANDLE__ specifies the UART Handle. - * @retval None - */ -#define __HAL_UART_CLEAR_OREFLAG(__HANDLE__) __HAL_UART_CLEAR_FLAG((__HANDLE__), UART_CLEAR_OREF) - -/** @brief Clear the UART IDLE pending flag. - * @param __HANDLE__ specifies the UART Handle. - * @retval None - */ -#define __HAL_UART_CLEAR_IDLEFLAG(__HANDLE__) __HAL_UART_CLEAR_FLAG((__HANDLE__), UART_CLEAR_IDLEF) - - -/** @brief Check whether the specified UART flag is set or not. - * @param __HANDLE__ specifies the UART Handle. - * @param __FLAG__ specifies the flag to check. - * This parameter can be one of the following values: - * @arg @ref UART_FLAG_REACK Receive enable acknowledge flag - * @arg @ref UART_FLAG_TEACK Transmit enable acknowledge flag - * @arg @ref UART_FLAG_WUF Wake up from stop mode flag - * @arg @ref UART_FLAG_RWU Receiver wake up flag (if the UART in mute mode) - * @arg @ref UART_FLAG_SBKF Send Break flag - * @arg @ref UART_FLAG_CMF Character match flag - * @arg @ref UART_FLAG_BUSY Busy flag - * @arg @ref UART_FLAG_ABRF Auto Baud rate detection flag - * @arg @ref UART_FLAG_ABRE Auto Baud rate detection error flag - * @arg @ref UART_FLAG_CTS CTS Change flag - * @arg @ref UART_FLAG_LBDF LIN Break detection flag - * @arg @ref UART_FLAG_TXE Transmit data register empty flag - * @arg @ref UART_FLAG_TC Transmission Complete flag - * @arg @ref UART_FLAG_RXNE Receive data register not empty flag - * @arg @ref UART_FLAG_RTOF Receiver Timeout flag - * @arg @ref UART_FLAG_IDLE Idle Line detection flag - * @arg @ref UART_FLAG_ORE Overrun Error flag - * @arg @ref UART_FLAG_NE Noise Error flag - * @arg @ref UART_FLAG_FE Framing Error flag - * @arg @ref UART_FLAG_PE Parity Error flag - * @retval The new state of __FLAG__ (TRUE or FALSE). - */ -#define __HAL_UART_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->ISR & (__FLAG__)) == (__FLAG__)) - -/** @brief Enable the specified UART interrupt. - * @param __HANDLE__ specifies the UART Handle. - * @param __INTERRUPT__ specifies the UART interrupt source to enable. - * This parameter can be one of the following values: - * @arg @ref UART_IT_WUF Wakeup from stop mode interrupt - * @arg @ref UART_IT_CM Character match interrupt - * @arg @ref UART_IT_CTS CTS change interrupt - * @arg @ref UART_IT_LBD LIN Break detection interrupt - * @arg @ref UART_IT_TXE Transmit Data Register empty interrupt - * @arg @ref UART_IT_TC Transmission complete interrupt - * @arg @ref UART_IT_RXNE Receive Data register not empty interrupt - * @arg @ref UART_IT_RTO Receive Timeout interrupt - * @arg @ref UART_IT_IDLE Idle line detection interrupt - * @arg @ref UART_IT_PE Parity Error interrupt - * @arg @ref UART_IT_ERR Error interrupt (frame error, noise error, overrun error) - * @retval None - */ -#define __HAL_UART_ENABLE_IT(__HANDLE__, __INTERRUPT__) (\ - ((((uint8_t)(__INTERRUPT__)) >> 5U) == 1U)?\ - ((__HANDLE__)->Instance->CR1 |= (1U <<\ - ((__INTERRUPT__) & UART_IT_MASK))): \ - ((((uint8_t)(__INTERRUPT__)) >> 5U) == 2U)?\ - ((__HANDLE__)->Instance->CR2 |= (1U <<\ - ((__INTERRUPT__) & UART_IT_MASK))): \ - ((__HANDLE__)->Instance->CR3 |= (1U <<\ - ((__INTERRUPT__) & UART_IT_MASK)))) - -/** @brief Disable the specified UART interrupt. - * @param __HANDLE__ specifies the UART Handle. - * @param __INTERRUPT__ specifies the UART interrupt source to disable. - * This parameter can be one of the following values: - * @arg @ref UART_IT_WUF Wakeup from stop mode interrupt - * @arg @ref UART_IT_CM Character match interrupt - * @arg @ref UART_IT_CTS CTS change interrupt - * @arg @ref UART_IT_LBD LIN Break detection interrupt - * @arg @ref UART_IT_TXE Transmit Data Register empty interrupt - * @arg @ref UART_IT_TC Transmission complete interrupt - * @arg @ref UART_IT_RXNE Receive Data register not empty interrupt - * @arg @ref UART_IT_RTO Receive Timeout interrupt - * @arg @ref UART_IT_IDLE Idle line detection interrupt - * @arg @ref UART_IT_PE Parity Error interrupt - * @arg @ref UART_IT_ERR Error interrupt (Frame error, noise error, overrun error) - * @retval None - */ -#define __HAL_UART_DISABLE_IT(__HANDLE__, __INTERRUPT__) (\ - ((((uint8_t)(__INTERRUPT__)) >> 5U) == 1U)?\ - ((__HANDLE__)->Instance->CR1 &= ~ (1U <<\ - ((__INTERRUPT__) & UART_IT_MASK))): \ - ((((uint8_t)(__INTERRUPT__)) >> 5U) == 2U)?\ - ((__HANDLE__)->Instance->CR2 &= ~ (1U <<\ - ((__INTERRUPT__) & UART_IT_MASK))): \ - ((__HANDLE__)->Instance->CR3 &= ~ (1U <<\ - ((__INTERRUPT__) & UART_IT_MASK)))) - -/** @brief Check whether the specified UART interrupt has occurred or not. - * @param __HANDLE__ specifies the UART Handle. - * @param __INTERRUPT__ specifies the UART interrupt to check. - * This parameter can be one of the following values: - * @arg @ref UART_IT_WUF Wakeup from stop mode interrupt - * @arg @ref UART_IT_CM Character match interrupt - * @arg @ref UART_IT_CTS CTS change interrupt - * @arg @ref UART_IT_LBD LIN Break detection interrupt - * @arg @ref UART_IT_TXE Transmit Data Register empty interrupt - * @arg @ref UART_IT_TC Transmission complete interrupt - * @arg @ref UART_IT_RXNE Receive Data register not empty interrupt - * @arg @ref UART_IT_RTO Receive Timeout interrupt - * @arg @ref UART_IT_IDLE Idle line detection interrupt - * @arg @ref UART_IT_PE Parity Error interrupt - * @arg @ref UART_IT_ERR Error interrupt (Frame error, noise error, overrun error) - * @retval The new state of __INTERRUPT__ (SET or RESET). - */ -#define __HAL_UART_GET_IT(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->ISR\ - & (1U << ((__INTERRUPT__)>> 8U))) != RESET) ? SET : RESET) - -/** @brief Check whether the specified UART interrupt source is enabled or not. - * @param __HANDLE__ specifies the UART Handle. - * @param __INTERRUPT__ specifies the UART interrupt source to check. - * This parameter can be one of the following values: - * @arg @ref UART_IT_WUF Wakeup from stop mode interrupt - * @arg @ref UART_IT_CM Character match interrupt - * @arg @ref UART_IT_CTS CTS change interrupt - * @arg @ref UART_IT_LBD LIN Break detection interrupt - * @arg @ref UART_IT_TXE Transmit Data Register empty interrupt - * @arg @ref UART_IT_TC Transmission complete interrupt - * @arg @ref UART_IT_RXNE Receive Data register not empty interrupt - * @arg @ref UART_IT_RTO Receive Timeout interrupt - * @arg @ref UART_IT_IDLE Idle line detection interrupt - * @arg @ref UART_IT_PE Parity Error interrupt - * @arg @ref UART_IT_ERR Error interrupt (Frame error, noise error, overrun error) - * @retval The new state of __INTERRUPT__ (SET or RESET). - */ -#define __HAL_UART_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((((((uint8_t)(__INTERRUPT__)) >> 5U) == 1U) ?\ - (__HANDLE__)->Instance->CR1 : \ - (((((uint8_t)(__INTERRUPT__)) >> 5U) == 2U) ?\ - (__HANDLE__)->Instance->CR2 : \ - (__HANDLE__)->Instance->CR3)) & (1U <<\ - (((uint16_t)(__INTERRUPT__)) &\ - UART_IT_MASK))) != RESET) ? SET : RESET) - -/** @brief Clear the specified UART ISR flag, in setting the proper ICR register flag. - * @param __HANDLE__ specifies the UART Handle. - * @param __IT_CLEAR__ specifies the interrupt clear register flag that needs to be set - * to clear the corresponding interrupt - * This parameter can be one of the following values: - * @arg @ref UART_CLEAR_PEF Parity Error Clear Flag - * @arg @ref UART_CLEAR_FEF Framing Error Clear Flag - * @arg @ref UART_CLEAR_NEF Noise detected Clear Flag - * @arg @ref UART_CLEAR_OREF Overrun Error Clear Flag - * @arg @ref UART_CLEAR_IDLEF IDLE line detected Clear Flag - * @arg @ref UART_CLEAR_RTOF Receiver timeout clear flag - * @arg @ref UART_CLEAR_TCF Transmission Complete Clear Flag - * @arg @ref UART_CLEAR_LBDF LIN Break Detection Clear Flag - * @arg @ref UART_CLEAR_CTSF CTS Interrupt Clear Flag - * @arg @ref UART_CLEAR_CMF Character Match Clear Flag - * @arg @ref UART_CLEAR_WUF Wake Up from stop mode Clear Flag - * @retval None - */ -#define __HAL_UART_CLEAR_IT(__HANDLE__, __IT_CLEAR__) ((__HANDLE__)->Instance->ICR = (uint32_t)(__IT_CLEAR__)) - -/** @brief Set a specific UART request flag. - * @param __HANDLE__ specifies the UART Handle. - * @param __REQ__ specifies the request flag to set - * This parameter can be one of the following values: - * @arg @ref UART_AUTOBAUD_REQUEST Auto-Baud Rate Request - * @arg @ref UART_SENDBREAK_REQUEST Send Break Request - * @arg @ref UART_MUTE_MODE_REQUEST Mute Mode Request - * @arg @ref UART_RXDATA_FLUSH_REQUEST Receive Data flush Request - * @arg @ref UART_TXDATA_FLUSH_REQUEST Transmit data flush Request - * @retval None - */ -#define __HAL_UART_SEND_REQ(__HANDLE__, __REQ__) ((__HANDLE__)->Instance->RQR |= (uint16_t)(__REQ__)) - -/** @brief Enable the UART one bit sample method. - * @param __HANDLE__ specifies the UART Handle. - * @retval None - */ -#define __HAL_UART_ONE_BIT_SAMPLE_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3|= USART_CR3_ONEBIT) - -/** @brief Disable the UART one bit sample method. - * @param __HANDLE__ specifies the UART Handle. - * @retval None - */ -#define __HAL_UART_ONE_BIT_SAMPLE_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3 &= ~USART_CR3_ONEBIT) - -/** @brief Enable UART. - * @param __HANDLE__ specifies the UART Handle. - * @retval None - */ -#define __HAL_UART_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 |= USART_CR1_UE) - -/** @brief Disable UART. - * @param __HANDLE__ specifies the UART Handle. - * @retval None - */ -#define __HAL_UART_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= ~USART_CR1_UE) - -/** @brief Enable CTS flow control. - * @note This macro allows to enable CTS hardware flow control for a given UART instance, - * without need to call HAL_UART_Init() function. - * As involving direct access to UART registers, usage of this macro should be fully endorsed by user. - * @note As macro is expected to be used for modifying CTS Hw flow control feature activation, without need - * for USART instance Deinit/Init, following conditions for macro call should be fulfilled : - * - UART instance should have already been initialised (through call of HAL_UART_Init() ) - * - macro could only be called when corresponding UART instance is disabled - * (i.e. __HAL_UART_DISABLE(__HANDLE__)) and should be followed by an Enable - * macro (i.e. __HAL_UART_ENABLE(__HANDLE__)). - * @param __HANDLE__ specifies the UART Handle. - * @retval None - */ -#define __HAL_UART_HWCONTROL_CTS_ENABLE(__HANDLE__) \ - do{ \ - ATOMIC_SET_BIT((__HANDLE__)->Instance->CR3, USART_CR3_CTSE); \ - (__HANDLE__)->Init.HwFlowCtl |= USART_CR3_CTSE; \ - } while(0U) - -/** @brief Disable CTS flow control. - * @note This macro allows to disable CTS hardware flow control for a given UART instance, - * without need to call HAL_UART_Init() function. - * As involving direct access to UART registers, usage of this macro should be fully endorsed by user. - * @note As macro is expected to be used for modifying CTS Hw flow control feature activation, without need - * for USART instance Deinit/Init, following conditions for macro call should be fulfilled : - * - UART instance should have already been initialised (through call of HAL_UART_Init() ) - * - macro could only be called when corresponding UART instance is disabled - * (i.e. __HAL_UART_DISABLE(__HANDLE__)) and should be followed by an Enable - * macro (i.e. __HAL_UART_ENABLE(__HANDLE__)). - * @param __HANDLE__ specifies the UART Handle. - * @retval None - */ -#define __HAL_UART_HWCONTROL_CTS_DISABLE(__HANDLE__) \ - do{ \ - ATOMIC_CLEAR_BIT((__HANDLE__)->Instance->CR3, USART_CR3_CTSE); \ - (__HANDLE__)->Init.HwFlowCtl &= ~(USART_CR3_CTSE); \ - } while(0U) - -/** @brief Enable RTS flow control. - * @note This macro allows to enable RTS hardware flow control for a given UART instance, - * without need to call HAL_UART_Init() function. - * As involving direct access to UART registers, usage of this macro should be fully endorsed by user. - * @note As macro is expected to be used for modifying RTS Hw flow control feature activation, without need - * for USART instance Deinit/Init, following conditions for macro call should be fulfilled : - * - UART instance should have already been initialised (through call of HAL_UART_Init() ) - * - macro could only be called when corresponding UART instance is disabled - * (i.e. __HAL_UART_DISABLE(__HANDLE__)) and should be followed by an Enable - * macro (i.e. __HAL_UART_ENABLE(__HANDLE__)). - * @param __HANDLE__ specifies the UART Handle. - * @retval None - */ -#define __HAL_UART_HWCONTROL_RTS_ENABLE(__HANDLE__) \ - do{ \ - ATOMIC_SET_BIT((__HANDLE__)->Instance->CR3, USART_CR3_RTSE); \ - (__HANDLE__)->Init.HwFlowCtl |= USART_CR3_RTSE; \ - } while(0U) - -/** @brief Disable RTS flow control. - * @note This macro allows to disable RTS hardware flow control for a given UART instance, - * without need to call HAL_UART_Init() function. - * As involving direct access to UART registers, usage of this macro should be fully endorsed by user. - * @note As macro is expected to be used for modifying RTS Hw flow control feature activation, without need - * for USART instance Deinit/Init, following conditions for macro call should be fulfilled : - * - UART instance should have already been initialised (through call of HAL_UART_Init() ) - * - macro could only be called when corresponding UART instance is disabled - * (i.e. __HAL_UART_DISABLE(__HANDLE__)) and should be followed by an Enable - * macro (i.e. __HAL_UART_ENABLE(__HANDLE__)). - * @param __HANDLE__ specifies the UART Handle. - * @retval None - */ -#define __HAL_UART_HWCONTROL_RTS_DISABLE(__HANDLE__) \ - do{ \ - ATOMIC_CLEAR_BIT((__HANDLE__)->Instance->CR3, USART_CR3_RTSE);\ - (__HANDLE__)->Init.HwFlowCtl &= ~(USART_CR3_RTSE); \ - } while(0U) -/** - * @} - */ - -/* Private macros --------------------------------------------------------*/ -/** @defgroup UART_Private_Macros UART Private Macros - * @{ - */ - - -/** @brief BRR division operation to set BRR register in 8-bit oversampling mode. - * @param __PCLK__ UART clock. - * @param __BAUD__ Baud rate set by the user. - * @retval Division result - */ -#define UART_DIV_SAMPLING8(__PCLK__, __BAUD__) ((((__PCLK__)*2U) + ((__BAUD__)/2U)) / (__BAUD__)) - -/** @brief BRR division operation to set BRR register in 16-bit oversampling mode. - * @param __PCLK__ UART clock. - * @param __BAUD__ Baud rate set by the user. - * @retval Division result - */ -#define UART_DIV_SAMPLING16(__PCLK__, __BAUD__) (((__PCLK__) + ((__BAUD__)/2U)) / (__BAUD__)) - - -/** @brief Check UART Baud rate. - * @param __BAUDRATE__ Baudrate specified by the user. - * The maximum Baud Rate is derived from the maximum clock on F3 (i.e. 72 MHz) - * divided by the smallest oversampling used on the USART (i.e. 8) - * @retval SET (__BAUDRATE__ is valid) or RESET (__BAUDRATE__ is invalid) - */ -#define IS_UART_BAUDRATE(__BAUDRATE__) ((__BAUDRATE__) < 9000001U) - -/** @brief Check UART assertion time. - * @param __TIME__ 5-bit value assertion time. - * @retval Test result (TRUE or FALSE). - */ -#define IS_UART_ASSERTIONTIME(__TIME__) ((__TIME__) <= 0x1FU) - -/** @brief Check UART deassertion time. - * @param __TIME__ 5-bit value deassertion time. - * @retval Test result (TRUE or FALSE). - */ -#define IS_UART_DEASSERTIONTIME(__TIME__) ((__TIME__) <= 0x1FU) - -/** - * @brief Ensure that UART frame number of stop bits is valid. - * @param __STOPBITS__ UART frame number of stop bits. - * @retval SET (__STOPBITS__ is valid) or RESET (__STOPBITS__ is invalid) - */ -#define IS_UART_STOPBITS(__STOPBITS__) (((__STOPBITS__) == UART_STOPBITS_0_5) || \ - ((__STOPBITS__) == UART_STOPBITS_1) || \ - ((__STOPBITS__) == UART_STOPBITS_1_5) || \ - ((__STOPBITS__) == UART_STOPBITS_2)) - - -/** - * @brief Ensure that UART frame parity is valid. - * @param __PARITY__ UART frame parity. - * @retval SET (__PARITY__ is valid) or RESET (__PARITY__ is invalid) - */ -#define IS_UART_PARITY(__PARITY__) (((__PARITY__) == UART_PARITY_NONE) || \ - ((__PARITY__) == UART_PARITY_EVEN) || \ - ((__PARITY__) == UART_PARITY_ODD)) - -/** - * @brief Ensure that UART hardware flow control is valid. - * @param __CONTROL__ UART hardware flow control. - * @retval SET (__CONTROL__ is valid) or RESET (__CONTROL__ is invalid) - */ -#define IS_UART_HARDWARE_FLOW_CONTROL(__CONTROL__)\ - (((__CONTROL__) == UART_HWCONTROL_NONE) || \ - ((__CONTROL__) == UART_HWCONTROL_RTS) || \ - ((__CONTROL__) == UART_HWCONTROL_CTS) || \ - ((__CONTROL__) == UART_HWCONTROL_RTS_CTS)) - -/** - * @brief Ensure that UART communication mode is valid. - * @param __MODE__ UART communication mode. - * @retval SET (__MODE__ is valid) or RESET (__MODE__ is invalid) - */ -#define IS_UART_MODE(__MODE__) ((((__MODE__) & (~((uint32_t)(UART_MODE_TX_RX)))) == 0x00U) && ((__MODE__) != 0x00U)) - -/** - * @brief Ensure that UART state is valid. - * @param __STATE__ UART state. - * @retval SET (__STATE__ is valid) or RESET (__STATE__ is invalid) - */ -#define IS_UART_STATE(__STATE__) (((__STATE__) == UART_STATE_DISABLE) || \ - ((__STATE__) == UART_STATE_ENABLE)) - -/** - * @brief Ensure that UART oversampling is valid. - * @param __SAMPLING__ UART oversampling. - * @retval SET (__SAMPLING__ is valid) or RESET (__SAMPLING__ is invalid) - */ -#define IS_UART_OVERSAMPLING(__SAMPLING__) (((__SAMPLING__) == UART_OVERSAMPLING_16) || \ - ((__SAMPLING__) == UART_OVERSAMPLING_8)) - -/** - * @brief Ensure that UART frame sampling is valid. - * @param __ONEBIT__ UART frame sampling. - * @retval SET (__ONEBIT__ is valid) or RESET (__ONEBIT__ is invalid) - */ -#define IS_UART_ONE_BIT_SAMPLE(__ONEBIT__) (((__ONEBIT__) == UART_ONE_BIT_SAMPLE_DISABLE) || \ - ((__ONEBIT__) == UART_ONE_BIT_SAMPLE_ENABLE)) - -/** - * @brief Ensure that UART auto Baud rate detection mode is valid. - * @param __MODE__ UART auto Baud rate detection mode. - * @retval SET (__MODE__ is valid) or RESET (__MODE__ is invalid) - */ -#define IS_UART_ADVFEATURE_AUTOBAUDRATEMODE(__MODE__) (((__MODE__) == UART_ADVFEATURE_AUTOBAUDRATE_ONSTARTBIT) || \ - ((__MODE__) == UART_ADVFEATURE_AUTOBAUDRATE_ONFALLINGEDGE) || \ - ((__MODE__) == UART_ADVFEATURE_AUTOBAUDRATE_ON0X7FFRAME) || \ - ((__MODE__) == UART_ADVFEATURE_AUTOBAUDRATE_ON0X55FRAME)) - -/** - * @brief Ensure that UART receiver timeout setting is valid. - * @param __TIMEOUT__ UART receiver timeout setting. - * @retval SET (__TIMEOUT__ is valid) or RESET (__TIMEOUT__ is invalid) - */ -#define IS_UART_RECEIVER_TIMEOUT(__TIMEOUT__) (((__TIMEOUT__) == UART_RECEIVER_TIMEOUT_DISABLE) || \ - ((__TIMEOUT__) == UART_RECEIVER_TIMEOUT_ENABLE)) - -/** @brief Check the receiver timeout value. - * @note The maximum UART receiver timeout value is 0xFFFFFF. - * @param __TIMEOUTVALUE__ receiver timeout value. - * @retval Test result (TRUE or FALSE) - */ -#define IS_UART_RECEIVER_TIMEOUT_VALUE(__TIMEOUTVALUE__) ((__TIMEOUTVALUE__) <= 0xFFFFFFU) - -/** - * @brief Ensure that UART LIN state is valid. - * @param __LIN__ UART LIN state. - * @retval SET (__LIN__ is valid) or RESET (__LIN__ is invalid) - */ -#define IS_UART_LIN(__LIN__) (((__LIN__) == UART_LIN_DISABLE) || \ - ((__LIN__) == UART_LIN_ENABLE)) - -/** - * @brief Ensure that UART LIN break detection length is valid. - * @param __LENGTH__ UART LIN break detection length. - * @retval SET (__LENGTH__ is valid) or RESET (__LENGTH__ is invalid) - */ -#define IS_UART_LIN_BREAK_DETECT_LENGTH(__LENGTH__) (((__LENGTH__) == UART_LINBREAKDETECTLENGTH_10B) || \ - ((__LENGTH__) == UART_LINBREAKDETECTLENGTH_11B)) - -/** - * @brief Ensure that UART DMA TX state is valid. - * @param __DMATX__ UART DMA TX state. - * @retval SET (__DMATX__ is valid) or RESET (__DMATX__ is invalid) - */ -#define IS_UART_DMA_TX(__DMATX__) (((__DMATX__) == UART_DMA_TX_DISABLE) || \ - ((__DMATX__) == UART_DMA_TX_ENABLE)) - -/** - * @brief Ensure that UART DMA RX state is valid. - * @param __DMARX__ UART DMA RX state. - * @retval SET (__DMARX__ is valid) or RESET (__DMARX__ is invalid) - */ -#define IS_UART_DMA_RX(__DMARX__) (((__DMARX__) == UART_DMA_RX_DISABLE) || \ - ((__DMARX__) == UART_DMA_RX_ENABLE)) - -/** - * @brief Ensure that UART half-duplex state is valid. - * @param __HDSEL__ UART half-duplex state. - * @retval SET (__HDSEL__ is valid) or RESET (__HDSEL__ is invalid) - */ -#define IS_UART_HALF_DUPLEX(__HDSEL__) (((__HDSEL__) == UART_HALF_DUPLEX_DISABLE) || \ - ((__HDSEL__) == UART_HALF_DUPLEX_ENABLE)) - -/** - * @brief Ensure that UART wake-up method is valid. - * @param __WAKEUP__ UART wake-up method . - * @retval SET (__WAKEUP__ is valid) or RESET (__WAKEUP__ is invalid) - */ -#define IS_UART_WAKEUPMETHOD(__WAKEUP__) (((__WAKEUP__) == UART_WAKEUPMETHOD_IDLELINE) || \ - ((__WAKEUP__) == UART_WAKEUPMETHOD_ADDRESSMARK)) - -/** - * @brief Ensure that UART request parameter is valid. - * @param __PARAM__ UART request parameter. - * @retval SET (__PARAM__ is valid) or RESET (__PARAM__ is invalid) - */ -#define IS_UART_REQUEST_PARAMETER(__PARAM__) (((__PARAM__) == UART_AUTOBAUD_REQUEST) || \ - ((__PARAM__) == UART_SENDBREAK_REQUEST) || \ - ((__PARAM__) == UART_MUTE_MODE_REQUEST) || \ - ((__PARAM__) == UART_RXDATA_FLUSH_REQUEST) || \ - ((__PARAM__) == UART_TXDATA_FLUSH_REQUEST)) - -/** - * @brief Ensure that UART advanced features initialization is valid. - * @param __INIT__ UART advanced features initialization. - * @retval SET (__INIT__ is valid) or RESET (__INIT__ is invalid) - */ -#define IS_UART_ADVFEATURE_INIT(__INIT__) ((__INIT__) <= (UART_ADVFEATURE_NO_INIT | \ - UART_ADVFEATURE_TXINVERT_INIT | \ - UART_ADVFEATURE_RXINVERT_INIT | \ - UART_ADVFEATURE_DATAINVERT_INIT | \ - UART_ADVFEATURE_SWAP_INIT | \ - UART_ADVFEATURE_RXOVERRUNDISABLE_INIT | \ - UART_ADVFEATURE_DMADISABLEONERROR_INIT | \ - UART_ADVFEATURE_AUTOBAUDRATE_INIT | \ - UART_ADVFEATURE_MSBFIRST_INIT)) - -/** - * @brief Ensure that UART frame TX inversion setting is valid. - * @param __TXINV__ UART frame TX inversion setting. - * @retval SET (__TXINV__ is valid) or RESET (__TXINV__ is invalid) - */ -#define IS_UART_ADVFEATURE_TXINV(__TXINV__) (((__TXINV__) == UART_ADVFEATURE_TXINV_DISABLE) || \ - ((__TXINV__) == UART_ADVFEATURE_TXINV_ENABLE)) - -/** - * @brief Ensure that UART frame RX inversion setting is valid. - * @param __RXINV__ UART frame RX inversion setting. - * @retval SET (__RXINV__ is valid) or RESET (__RXINV__ is invalid) - */ -#define IS_UART_ADVFEATURE_RXINV(__RXINV__) (((__RXINV__) == UART_ADVFEATURE_RXINV_DISABLE) || \ - ((__RXINV__) == UART_ADVFEATURE_RXINV_ENABLE)) - -/** - * @brief Ensure that UART frame data inversion setting is valid. - * @param __DATAINV__ UART frame data inversion setting. - * @retval SET (__DATAINV__ is valid) or RESET (__DATAINV__ is invalid) - */ -#define IS_UART_ADVFEATURE_DATAINV(__DATAINV__) (((__DATAINV__) == UART_ADVFEATURE_DATAINV_DISABLE) || \ - ((__DATAINV__) == UART_ADVFEATURE_DATAINV_ENABLE)) - -/** - * @brief Ensure that UART frame RX/TX pins swap setting is valid. - * @param __SWAP__ UART frame RX/TX pins swap setting. - * @retval SET (__SWAP__ is valid) or RESET (__SWAP__ is invalid) - */ -#define IS_UART_ADVFEATURE_SWAP(__SWAP__) (((__SWAP__) == UART_ADVFEATURE_SWAP_DISABLE) || \ - ((__SWAP__) == UART_ADVFEATURE_SWAP_ENABLE)) - -/** - * @brief Ensure that UART frame overrun setting is valid. - * @param __OVERRUN__ UART frame overrun setting. - * @retval SET (__OVERRUN__ is valid) or RESET (__OVERRUN__ is invalid) - */ -#define IS_UART_OVERRUN(__OVERRUN__) (((__OVERRUN__) == UART_ADVFEATURE_OVERRUN_ENABLE) || \ - ((__OVERRUN__) == UART_ADVFEATURE_OVERRUN_DISABLE)) - -/** - * @brief Ensure that UART auto Baud rate state is valid. - * @param __AUTOBAUDRATE__ UART auto Baud rate state. - * @retval SET (__AUTOBAUDRATE__ is valid) or RESET (__AUTOBAUDRATE__ is invalid) - */ -#define IS_UART_ADVFEATURE_AUTOBAUDRATE(__AUTOBAUDRATE__) (((__AUTOBAUDRATE__) == \ - UART_ADVFEATURE_AUTOBAUDRATE_DISABLE) || \ - ((__AUTOBAUDRATE__) == UART_ADVFEATURE_AUTOBAUDRATE_ENABLE)) - -/** - * @brief Ensure that UART DMA enabling or disabling on error setting is valid. - * @param __DMA__ UART DMA enabling or disabling on error setting. - * @retval SET (__DMA__ is valid) or RESET (__DMA__ is invalid) - */ -#define IS_UART_ADVFEATURE_DMAONRXERROR(__DMA__) (((__DMA__) == UART_ADVFEATURE_DMA_ENABLEONRXERROR) || \ - ((__DMA__) == UART_ADVFEATURE_DMA_DISABLEONRXERROR)) - -/** - * @brief Ensure that UART frame MSB first setting is valid. - * @param __MSBFIRST__ UART frame MSB first setting. - * @retval SET (__MSBFIRST__ is valid) or RESET (__MSBFIRST__ is invalid) - */ -#define IS_UART_ADVFEATURE_MSBFIRST(__MSBFIRST__) (((__MSBFIRST__) == UART_ADVFEATURE_MSBFIRST_DISABLE) || \ - ((__MSBFIRST__) == UART_ADVFEATURE_MSBFIRST_ENABLE)) - -/** - * @brief Ensure that UART stop mode state is valid. - * @param __STOPMODE__ UART stop mode state. - * @retval SET (__STOPMODE__ is valid) or RESET (__STOPMODE__ is invalid) - */ -#define IS_UART_ADVFEATURE_STOPMODE(__STOPMODE__) (((__STOPMODE__) == UART_ADVFEATURE_STOPMODE_DISABLE) || \ - ((__STOPMODE__) == UART_ADVFEATURE_STOPMODE_ENABLE)) - -/** - * @brief Ensure that UART mute mode state is valid. - * @param __MUTE__ UART mute mode state. - * @retval SET (__MUTE__ is valid) or RESET (__MUTE__ is invalid) - */ -#define IS_UART_MUTE_MODE(__MUTE__) (((__MUTE__) == UART_ADVFEATURE_MUTEMODE_DISABLE) || \ - ((__MUTE__) == UART_ADVFEATURE_MUTEMODE_ENABLE)) - -/** - * @brief Ensure that UART wake-up selection is valid. - * @param __WAKE__ UART wake-up selection. - * @retval SET (__WAKE__ is valid) or RESET (__WAKE__ is invalid) - */ -#define IS_UART_WAKEUP_SELECTION(__WAKE__) (((__WAKE__) == UART_WAKEUP_ON_ADDRESS) || \ - ((__WAKE__) == UART_WAKEUP_ON_STARTBIT) || \ - ((__WAKE__) == UART_WAKEUP_ON_READDATA_NONEMPTY)) - -/** - * @brief Ensure that UART driver enable polarity is valid. - * @param __POLARITY__ UART driver enable polarity. - * @retval SET (__POLARITY__ is valid) or RESET (__POLARITY__ is invalid) - */ -#define IS_UART_DE_POLARITY(__POLARITY__) (((__POLARITY__) == UART_DE_POLARITY_HIGH) || \ - ((__POLARITY__) == UART_DE_POLARITY_LOW)) - - -/** - * @} - */ - -/* Include UART HAL Extended module */ -#include "stm32f3xx_hal_uart_ex.h" - -/* Exported functions --------------------------------------------------------*/ -/** @addtogroup UART_Exported_Functions UART Exported Functions - * @{ - */ - -/** @addtogroup UART_Exported_Functions_Group1 Initialization and de-initialization functions - * @{ - */ - -/* Initialization and de-initialization functions ****************************/ -HAL_StatusTypeDef HAL_UART_Init(UART_HandleTypeDef *huart); -HAL_StatusTypeDef HAL_HalfDuplex_Init(UART_HandleTypeDef *huart); -HAL_StatusTypeDef HAL_LIN_Init(UART_HandleTypeDef *huart, uint32_t BreakDetectLength); -HAL_StatusTypeDef HAL_MultiProcessor_Init(UART_HandleTypeDef *huart, uint8_t Address, uint32_t WakeUpMethod); -HAL_StatusTypeDef HAL_UART_DeInit(UART_HandleTypeDef *huart); -void HAL_UART_MspInit(UART_HandleTypeDef *huart); -void HAL_UART_MspDeInit(UART_HandleTypeDef *huart); - -/* Callbacks Register/UnRegister functions ***********************************/ -#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) -HAL_StatusTypeDef HAL_UART_RegisterCallback(UART_HandleTypeDef *huart, HAL_UART_CallbackIDTypeDef CallbackID, - pUART_CallbackTypeDef pCallback); -HAL_StatusTypeDef HAL_UART_UnRegisterCallback(UART_HandleTypeDef *huart, HAL_UART_CallbackIDTypeDef CallbackID); - -HAL_StatusTypeDef HAL_UART_RegisterRxEventCallback(UART_HandleTypeDef *huart, pUART_RxEventCallbackTypeDef pCallback); -HAL_StatusTypeDef HAL_UART_UnRegisterRxEventCallback(UART_HandleTypeDef *huart); -#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ - -/** - * @} - */ - -/** @addtogroup UART_Exported_Functions_Group2 IO operation functions - * @{ - */ - -/* IO operation functions *****************************************************/ -HAL_StatusTypeDef HAL_UART_Transmit(UART_HandleTypeDef *huart, const uint8_t *pData, uint16_t Size, uint32_t Timeout); -HAL_StatusTypeDef HAL_UART_Receive(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size, uint32_t Timeout); -HAL_StatusTypeDef HAL_UART_Transmit_IT(UART_HandleTypeDef *huart, const uint8_t *pData, uint16_t Size); -HAL_StatusTypeDef HAL_UART_Receive_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size); -HAL_StatusTypeDef HAL_UART_Transmit_DMA(UART_HandleTypeDef *huart, const uint8_t *pData, uint16_t Size); -HAL_StatusTypeDef HAL_UART_Receive_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size); -HAL_StatusTypeDef HAL_UART_DMAPause(UART_HandleTypeDef *huart); -HAL_StatusTypeDef HAL_UART_DMAResume(UART_HandleTypeDef *huart); -HAL_StatusTypeDef HAL_UART_DMAStop(UART_HandleTypeDef *huart); -/* Transfer Abort functions */ -HAL_StatusTypeDef HAL_UART_Abort(UART_HandleTypeDef *huart); -HAL_StatusTypeDef HAL_UART_AbortTransmit(UART_HandleTypeDef *huart); -HAL_StatusTypeDef HAL_UART_AbortReceive(UART_HandleTypeDef *huart); -HAL_StatusTypeDef HAL_UART_Abort_IT(UART_HandleTypeDef *huart); -HAL_StatusTypeDef HAL_UART_AbortTransmit_IT(UART_HandleTypeDef *huart); -HAL_StatusTypeDef HAL_UART_AbortReceive_IT(UART_HandleTypeDef *huart); - -void HAL_UART_IRQHandler(UART_HandleTypeDef *huart); -void HAL_UART_TxHalfCpltCallback(UART_HandleTypeDef *huart); -void HAL_UART_TxCpltCallback(UART_HandleTypeDef *huart); -void HAL_UART_RxHalfCpltCallback(UART_HandleTypeDef *huart); -void HAL_UART_RxCpltCallback(UART_HandleTypeDef *huart); -void HAL_UART_ErrorCallback(UART_HandleTypeDef *huart); -void HAL_UART_AbortCpltCallback(UART_HandleTypeDef *huart); -void HAL_UART_AbortTransmitCpltCallback(UART_HandleTypeDef *huart); -void HAL_UART_AbortReceiveCpltCallback(UART_HandleTypeDef *huart); - -void HAL_UARTEx_RxEventCallback(UART_HandleTypeDef *huart, uint16_t Size); - -/** - * @} - */ - -/** @addtogroup UART_Exported_Functions_Group3 Peripheral Control functions - * @{ - */ - -/* Peripheral Control functions ************************************************/ -void HAL_UART_ReceiverTimeout_Config(UART_HandleTypeDef *huart, uint32_t TimeoutValue); -HAL_StatusTypeDef HAL_UART_EnableReceiverTimeout(UART_HandleTypeDef *huart); -HAL_StatusTypeDef HAL_UART_DisableReceiverTimeout(UART_HandleTypeDef *huart); - -HAL_StatusTypeDef HAL_LIN_SendBreak(UART_HandleTypeDef *huart); -HAL_StatusTypeDef HAL_MultiProcessor_EnableMuteMode(UART_HandleTypeDef *huart); -HAL_StatusTypeDef HAL_MultiProcessor_DisableMuteMode(UART_HandleTypeDef *huart); -void HAL_MultiProcessor_EnterMuteMode(UART_HandleTypeDef *huart); -HAL_StatusTypeDef HAL_HalfDuplex_EnableTransmitter(UART_HandleTypeDef *huart); -HAL_StatusTypeDef HAL_HalfDuplex_EnableReceiver(UART_HandleTypeDef *huart); - -/** - * @} - */ - -/** @addtogroup UART_Exported_Functions_Group4 Peripheral State and Error functions - * @{ - */ - -/* Peripheral State and Errors functions **************************************************/ -HAL_UART_StateTypeDef HAL_UART_GetState(const UART_HandleTypeDef *huart); -uint32_t HAL_UART_GetError(const UART_HandleTypeDef *huart); - -/** - * @} - */ - -/** - * @} - */ - -/* Private functions -----------------------------------------------------------*/ -/** @addtogroup UART_Private_Functions UART Private Functions - * @{ - */ -#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) -void UART_InitCallbacksToDefault(UART_HandleTypeDef *huart); -#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ -HAL_StatusTypeDef UART_SetConfig(UART_HandleTypeDef *huart); -HAL_StatusTypeDef UART_CheckIdleState(UART_HandleTypeDef *huart); -HAL_StatusTypeDef UART_WaitOnFlagUntilTimeout(UART_HandleTypeDef *huart, uint32_t Flag, FlagStatus Status, - uint32_t Tickstart, uint32_t Timeout); -void UART_AdvFeatureConfig(UART_HandleTypeDef *huart); -HAL_StatusTypeDef UART_Start_Receive_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size); -HAL_StatusTypeDef UART_Start_Receive_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size); - -/** - * @} - */ - -/* Private variables -----------------------------------------------------------*/ -/** - * @} - */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - -#endif /* STM32F3xx_HAL_UART_H */ - diff --git a/Drivers/STM32F3xx_HAL_Driver/Inc/stm32f3xx_hal_uart_ex.h b/Drivers/STM32F3xx_HAL_Driver/Inc/stm32f3xx_hal_uart_ex.h deleted file mode 100644 index e5d9e72..0000000 --- a/Drivers/STM32F3xx_HAL_Driver/Inc/stm32f3xx_hal_uart_ex.h +++ /dev/null @@ -1,513 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f3xx_hal_uart_ex.h - * @author MCD Application Team - * @brief Header file of UART HAL Extended module. - ****************************************************************************** - * @attention - * - * Copyright (c) 2016 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef STM32F3xx_HAL_UART_EX_H -#define STM32F3xx_HAL_UART_EX_H - -#ifdef __cplusplus -extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f3xx_hal_def.h" - -/** @addtogroup STM32F3xx_HAL_Driver - * @{ - */ - -/** @addtogroup UARTEx - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ -/** @defgroup UARTEx_Exported_Types UARTEx Exported Types - * @{ - */ - -/** - * @brief UART wake up from stop mode parameters - */ -typedef struct -{ - uint32_t WakeUpEvent; /*!< Specifies which event will activate the Wakeup from Stop mode flag (WUF). - This parameter can be a value of @ref UART_WakeUp_from_Stop_Selection. - If set to UART_WAKEUP_ON_ADDRESS, the two other fields below must - be filled up. */ - - uint16_t AddressLength; /*!< Specifies whether the address is 4 or 7-bit long. - This parameter can be a value of @ref UARTEx_WakeUp_Address_Length. */ - - uint8_t Address; /*!< UART/USART node address (7-bit long max). */ -} UART_WakeUpTypeDef; - -/** - * @} - */ - -/* Exported constants --------------------------------------------------------*/ -/** @defgroup UARTEx_Exported_Constants UARTEx Exported Constants - * @{ - */ - -/** @defgroup UARTEx_Word_Length UARTEx Word Length - * @{ - */ -#if defined(USART_CR1_M1) -#define UART_WORDLENGTH_7B USART_CR1_M1 /*!< 7-bit long UART frame */ -#endif /* USART_CR1_M1 */ -#define UART_WORDLENGTH_8B 0x00000000U /*!< 8-bit long UART frame */ -#if defined (USART_CR1_M0) -#define UART_WORDLENGTH_9B USART_CR1_M0 /*!< 9-bit long UART frame */ -#else -#define UART_WORDLENGTH_9B USART_CR1_M /*!< 9-bit long UART frame */ -#endif /* USART_CR1_M0 */ -/** - * @} - */ - -/** @defgroup UARTEx_WakeUp_Address_Length UARTEx WakeUp Address Length - * @{ - */ -#define UART_ADDRESS_DETECT_4B 0x00000000U /*!< 4-bit long wake-up address */ -#define UART_ADDRESS_DETECT_7B USART_CR2_ADDM7 /*!< 7-bit long wake-up address */ -/** - * @} - */ - -/** - * @} - */ - -/* Exported macros -----------------------------------------------------------*/ -/* Exported functions --------------------------------------------------------*/ -/** @addtogroup UARTEx_Exported_Functions - * @{ - */ - -/** @addtogroup UARTEx_Exported_Functions_Group1 - * @{ - */ - -/* Initialization and de-initialization functions ****************************/ -HAL_StatusTypeDef HAL_RS485Ex_Init(UART_HandleTypeDef *huart, uint32_t Polarity, uint32_t AssertionTime, - uint32_t DeassertionTime); - -/** - * @} - */ - -/** @addtogroup UARTEx_Exported_Functions_Group2 - * @{ - */ - -void HAL_UARTEx_WakeupCallback(UART_HandleTypeDef *huart); - -/** - * @} - */ - -/** @addtogroup UARTEx_Exported_Functions_Group3 - * @{ - */ - -/* Peripheral Control functions **********************************************/ -HAL_StatusTypeDef HAL_UARTEx_StopModeWakeUpSourceConfig(UART_HandleTypeDef *huart, UART_WakeUpTypeDef WakeUpSelection); -HAL_StatusTypeDef HAL_UARTEx_EnableStopMode(UART_HandleTypeDef *huart); -HAL_StatusTypeDef HAL_UARTEx_DisableStopMode(UART_HandleTypeDef *huart); - -HAL_StatusTypeDef HAL_MultiProcessorEx_AddressLength_Set(UART_HandleTypeDef *huart, uint32_t AddressLength); - - -HAL_StatusTypeDef HAL_UARTEx_ReceiveToIdle(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size, uint16_t *RxLen, - uint32_t Timeout); -HAL_StatusTypeDef HAL_UARTEx_ReceiveToIdle_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size); -HAL_StatusTypeDef HAL_UARTEx_ReceiveToIdle_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size); - -HAL_UART_RxEventTypeTypeDef HAL_UARTEx_GetRxEventType(const UART_HandleTypeDef *huart); - - -/** - * @} - */ - -/** - * @} - */ - -/* Private macros ------------------------------------------------------------*/ -/** @defgroup UARTEx_Private_Macros UARTEx Private Macros - * @{ - */ - -/** @brief Report the UART clock source. - * @param __HANDLE__ specifies the UART Handle. - * @param __CLOCKSOURCE__ output variable. - * @retval UART clocking source, written in __CLOCKSOURCE__. - */ -#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx) || defined(STM32F302xC) \ - || defined(STM32F303xC) || defined(STM32F358xx) -#define UART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \ - do { \ - if((__HANDLE__)->Instance == USART1) \ - { \ - switch(__HAL_RCC_GET_USART1_SOURCE()) \ - { \ - case RCC_USART1CLKSOURCE_PCLK2: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK2; \ - break; \ - case RCC_USART1CLKSOURCE_HSI: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ - break; \ - case RCC_USART1CLKSOURCE_SYSCLK: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \ - break; \ - case RCC_USART1CLKSOURCE_LSE: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ - break; \ - default: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ - break; \ - } \ - } \ - else if((__HANDLE__)->Instance == USART2) \ - { \ - switch(__HAL_RCC_GET_USART2_SOURCE()) \ - { \ - case RCC_USART2CLKSOURCE_PCLK1: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ - break; \ - case RCC_USART2CLKSOURCE_HSI: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ - break; \ - case RCC_USART2CLKSOURCE_SYSCLK: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \ - break; \ - case RCC_USART2CLKSOURCE_LSE: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ - break; \ - default: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ - break; \ - } \ - } \ - else if((__HANDLE__)->Instance == USART3) \ - { \ - switch(__HAL_RCC_GET_USART3_SOURCE()) \ - { \ - case RCC_USART3CLKSOURCE_PCLK1: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ - break; \ - case RCC_USART3CLKSOURCE_HSI: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ - break; \ - case RCC_USART3CLKSOURCE_SYSCLK: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \ - break; \ - case RCC_USART3CLKSOURCE_LSE: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ - break; \ - default: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ - break; \ - } \ - } \ - else if((__HANDLE__)->Instance == UART4) \ - { \ - switch(__HAL_RCC_GET_UART4_SOURCE()) \ - { \ - case RCC_UART4CLKSOURCE_PCLK1: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ - break; \ - case RCC_UART4CLKSOURCE_HSI: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ - break; \ - case RCC_UART4CLKSOURCE_SYSCLK: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \ - break; \ - case RCC_UART4CLKSOURCE_LSE: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ - break; \ - default: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ - break; \ - } \ - } \ - else if ((__HANDLE__)->Instance == UART5) \ - { \ - switch(__HAL_RCC_GET_UART5_SOURCE()) \ - { \ - case RCC_UART5CLKSOURCE_PCLK1: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ - break; \ - case RCC_UART5CLKSOURCE_HSI: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ - break; \ - case RCC_UART5CLKSOURCE_SYSCLK: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \ - break; \ - case RCC_UART5CLKSOURCE_LSE: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ - break; \ - default: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ - break; \ - } \ - } \ - else \ - { \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ - } \ - } while(0U) -#elif defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx) || defined(STM32F301x8) \ - || defined(STM32F302x8) || defined(STM32F318xx) -#define UART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \ - do { \ - if((__HANDLE__)->Instance == USART1) \ - { \ - switch(__HAL_RCC_GET_USART1_SOURCE()) \ - { \ - case RCC_USART1CLKSOURCE_PCLK1: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ - break; \ - case RCC_USART1CLKSOURCE_HSI: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ - break; \ - case RCC_USART1CLKSOURCE_SYSCLK: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \ - break; \ - case RCC_USART1CLKSOURCE_LSE: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ - break; \ - default: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ - break; \ - } \ - } \ - else if((__HANDLE__)->Instance == USART2) \ - { \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ - } \ - else if((__HANDLE__)->Instance == USART3) \ - { \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ - } \ - else \ - { \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ - } \ - } while(0U) -#else -#define UART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \ - do { \ - if((__HANDLE__)->Instance == USART1) \ - { \ - switch(__HAL_RCC_GET_USART1_SOURCE()) \ - { \ - case RCC_USART1CLKSOURCE_PCLK2: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK2; \ - break; \ - case RCC_USART1CLKSOURCE_HSI: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ - break; \ - case RCC_USART1CLKSOURCE_SYSCLK: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \ - break; \ - case RCC_USART1CLKSOURCE_LSE: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ - break; \ - default: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ - break; \ - } \ - } \ - else if((__HANDLE__)->Instance == USART2) \ - { \ - switch(__HAL_RCC_GET_USART2_SOURCE()) \ - { \ - case RCC_USART2CLKSOURCE_PCLK1: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ - break; \ - case RCC_USART2CLKSOURCE_HSI: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ - break; \ - case RCC_USART2CLKSOURCE_SYSCLK: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \ - break; \ - case RCC_USART2CLKSOURCE_LSE: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ - break; \ - default: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ - break; \ - } \ - } \ - else if((__HANDLE__)->Instance == USART3) \ - { \ - switch(__HAL_RCC_GET_USART3_SOURCE()) \ - { \ - case RCC_USART3CLKSOURCE_PCLK1: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ - break; \ - case RCC_USART3CLKSOURCE_HSI: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ - break; \ - case RCC_USART3CLKSOURCE_SYSCLK: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \ - break; \ - case RCC_USART3CLKSOURCE_LSE: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ - break; \ - default: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ - break; \ - } \ - } \ - else \ - { \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ - } \ - } while(0U) -#endif /* STM32F302xE || STM32F303xE || STM32F398xx || STM32F302xC || STM32F303xC || STM32F358xx */ - -/** @brief Report the UART mask to apply to retrieve the received data - * according to the word length and to the parity bits activation. - * @note If PCE = 1, the parity bit is not included in the data extracted - * by the reception API(). - * This masking operation is not carried out in the case of - * DMA transfers. - * @param __HANDLE__ specifies the UART Handle. - * @retval None, the mask to apply to UART RDR register is stored in (__HANDLE__)->Mask field. - */ -#if defined (USART_CR1_M1) -#define UART_MASK_COMPUTATION(__HANDLE__) \ - do { \ - if ((__HANDLE__)->Init.WordLength == UART_WORDLENGTH_9B) \ - { \ - if ((__HANDLE__)->Init.Parity == UART_PARITY_NONE) \ - { \ - (__HANDLE__)->Mask = 0x01FFU ; \ - } \ - else \ - { \ - (__HANDLE__)->Mask = 0x00FFU ; \ - } \ - } \ - else if ((__HANDLE__)->Init.WordLength == UART_WORDLENGTH_8B) \ - { \ - if ((__HANDLE__)->Init.Parity == UART_PARITY_NONE) \ - { \ - (__HANDLE__)->Mask = 0x00FFU ; \ - } \ - else \ - { \ - (__HANDLE__)->Mask = 0x007FU ; \ - } \ - } \ - else if ((__HANDLE__)->Init.WordLength == UART_WORDLENGTH_7B) \ - { \ - if ((__HANDLE__)->Init.Parity == UART_PARITY_NONE) \ - { \ - (__HANDLE__)->Mask = 0x007FU ; \ - } \ - else \ - { \ - (__HANDLE__)->Mask = 0x003FU ; \ - } \ - } \ - else \ - { \ - (__HANDLE__)->Mask = 0x0000U; \ - } \ - } while(0U) - -#else -#define UART_MASK_COMPUTATION(__HANDLE__) \ - do { \ - if ((__HANDLE__)->Init.WordLength == UART_WORDLENGTH_9B) \ - { \ - if ((__HANDLE__)->Init.Parity == UART_PARITY_NONE) \ - { \ - (__HANDLE__)->Mask = 0x01FFU ; \ - } \ - else \ - { \ - (__HANDLE__)->Mask = 0x00FFU ; \ - } \ - } \ - else if ((__HANDLE__)->Init.WordLength == UART_WORDLENGTH_8B) \ - { \ - if ((__HANDLE__)->Init.Parity == UART_PARITY_NONE) \ - { \ - (__HANDLE__)->Mask = 0x00FFU ; \ - } \ - else \ - { \ - (__HANDLE__)->Mask = 0x007FU ; \ - } \ - } \ - else \ - { \ - (__HANDLE__)->Mask = 0x0000U; \ - } \ - } while(0U) - -#endif /* USART_CR1_M1 */ - -/** - * @brief Ensure that UART frame length is valid. - * @param __LENGTH__ UART frame length. - * @retval SET (__LENGTH__ is valid) or RESET (__LENGTH__ is invalid) - */ -#if defined (USART_CR1_M1) -#define IS_UART_WORD_LENGTH(__LENGTH__) (((__LENGTH__) == UART_WORDLENGTH_7B) || \ - ((__LENGTH__) == UART_WORDLENGTH_8B) || \ - ((__LENGTH__) == UART_WORDLENGTH_9B)) -#else -#define IS_UART_WORD_LENGTH(__LENGTH__) (((__LENGTH__) == UART_WORDLENGTH_8B) || \ - ((__LENGTH__) == UART_WORDLENGTH_9B)) -#endif /* USART_CR1_M1 */ - -/** - * @brief Ensure that UART wake-up address length is valid. - * @param __ADDRESS__ UART wake-up address length. - * @retval SET (__ADDRESS__ is valid) or RESET (__ADDRESS__ is invalid) - */ -#define IS_UART_ADDRESSLENGTH_DETECT(__ADDRESS__) (((__ADDRESS__) == UART_ADDRESS_DETECT_4B) || \ - ((__ADDRESS__) == UART_ADDRESS_DETECT_7B)) - -/** - * @} - */ - -/* Private functions ---------------------------------------------------------*/ - -/** - * @} - */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - -#endif /* STM32F3xx_HAL_UART_EX_H */ - diff --git a/Drivers/STM32F3xx_HAL_Driver/Src/stm32f3xx_hal_uart.c b/Drivers/STM32F3xx_HAL_Driver/Src/stm32f3xx_hal_uart.c deleted file mode 100644 index a6b101f..0000000 --- a/Drivers/STM32F3xx_HAL_Driver/Src/stm32f3xx_hal_uart.c +++ /dev/null @@ -1,4012 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f3xx_hal_uart.c - * @author MCD Application Team - * @brief UART HAL module driver. - * This file provides firmware functions to manage the following - * functionalities of the Universal Asynchronous Receiver Transmitter Peripheral (UART). - * + Initialization and de-initialization functions - * + IO operation functions - * + Peripheral Control functions - * - * - ****************************************************************************** - * @attention - * - * Copyright (c) 2016 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - @verbatim - =============================================================================== - ##### How to use this driver ##### - =============================================================================== - [..] - The UART HAL driver can be used as follows: - - (#) Declare a UART_HandleTypeDef handle structure (eg. UART_HandleTypeDef huart). - (#) Initialize the UART low level resources by implementing the HAL_UART_MspInit() API: - (++) Enable the USARTx interface clock. - (++) UART pins configuration: - (+++) Enable the clock for the UART GPIOs. - (+++) Configure these UART pins as alternate function pull-up. - (++) NVIC configuration if you need to use interrupt process (HAL_UART_Transmit_IT() - and HAL_UART_Receive_IT() APIs): - (+++) Configure the USARTx interrupt priority. - (+++) Enable the NVIC USART IRQ handle. - (++) UART interrupts handling: - -@@- The specific UART interrupts (Transmission complete interrupt, - RXNE interrupt, RX/TX FIFOs related interrupts and Error Interrupts) - are managed using the macros __HAL_UART_ENABLE_IT() and __HAL_UART_DISABLE_IT() - inside the transmit and receive processes. - (++) DMA Configuration if you need to use DMA process (HAL_UART_Transmit_DMA() - and HAL_UART_Receive_DMA() APIs): - (+++) Declare a DMA handle structure for the Tx/Rx channel. - (+++) Enable the DMAx interface clock. - (+++) Configure the declared DMA handle structure with the required Tx/Rx parameters. - (+++) Configure the DMA Tx/Rx channel. - (+++) Associate the initialized DMA handle to the UART DMA Tx/Rx handle. - (+++) Configure the priority and enable the NVIC for the transfer complete - interrupt on the DMA Tx/Rx channel. - - (#) Program the Baud Rate, Word Length, Stop Bit, Parity, Hardware - flow control and Mode (Receiver/Transmitter) in the huart handle Init structure. - - (#) If required, program UART advanced features (TX/RX pins swap, auto Baud rate detection,...) - in the huart handle AdvancedInit structure. - - (#) For the UART asynchronous mode, initialize the UART registers by calling - the HAL_UART_Init() API. - - (#) For the UART Half duplex mode, initialize the UART registers by calling - the HAL_HalfDuplex_Init() API. - - (#) For the UART LIN (Local Interconnection Network) mode, initialize the UART registers - by calling the HAL_LIN_Init() API. - - (#) For the UART Multiprocessor mode, initialize the UART registers - by calling the HAL_MultiProcessor_Init() API. - - (#) For the UART RS485 Driver Enabled mode, initialize the UART registers - by calling the HAL_RS485Ex_Init() API. - - [..] - (@) These API's (HAL_UART_Init(), HAL_HalfDuplex_Init(), HAL_LIN_Init(), HAL_MultiProcessor_Init(), - also configure the low level Hardware GPIO, CLOCK, CORTEX...etc) by - calling the customized HAL_UART_MspInit() API. - - ##### Callback registration ##### - ================================== - - [..] - The compilation define USE_HAL_UART_REGISTER_CALLBACKS when set to 1 - allows the user to configure dynamically the driver callbacks. - - [..] - Use Function HAL_UART_RegisterCallback() to register a user callback. - Function HAL_UART_RegisterCallback() allows to register following callbacks: - (+) TxHalfCpltCallback : Tx Half Complete Callback. - (+) TxCpltCallback : Tx Complete Callback. - (+) RxHalfCpltCallback : Rx Half Complete Callback. - (+) RxCpltCallback : Rx Complete Callback. - (+) ErrorCallback : Error Callback. - (+) AbortCpltCallback : Abort Complete Callback. - (+) AbortTransmitCpltCallback : Abort Transmit Complete Callback. - (+) AbortReceiveCpltCallback : Abort Receive Complete Callback. - (+) WakeupCallback : Wakeup Callback. - (+) MspInitCallback : UART MspInit. - (+) MspDeInitCallback : UART MspDeInit. - This function takes as parameters the HAL peripheral handle, the Callback ID - and a pointer to the user callback function. - - [..] - Use function HAL_UART_UnRegisterCallback() to reset a callback to the default - weak function. - HAL_UART_UnRegisterCallback() takes as parameters the HAL peripheral handle, - and the Callback ID. - This function allows to reset following callbacks: - (+) TxHalfCpltCallback : Tx Half Complete Callback. - (+) TxCpltCallback : Tx Complete Callback. - (+) RxHalfCpltCallback : Rx Half Complete Callback. - (+) RxCpltCallback : Rx Complete Callback. - (+) ErrorCallback : Error Callback. - (+) AbortCpltCallback : Abort Complete Callback. - (+) AbortTransmitCpltCallback : Abort Transmit Complete Callback. - (+) AbortReceiveCpltCallback : Abort Receive Complete Callback. - (+) WakeupCallback : Wakeup Callback. - (+) MspInitCallback : UART MspInit. - (+) MspDeInitCallback : UART MspDeInit. - - [..] - For specific callback RxEventCallback, use dedicated registration/reset functions: - respectively HAL_UART_RegisterRxEventCallback() , HAL_UART_UnRegisterRxEventCallback(). - - [..] - By default, after the HAL_UART_Init() and when the state is HAL_UART_STATE_RESET - all callbacks are set to the corresponding weak functions: - examples HAL_UART_TxCpltCallback(), HAL_UART_RxHalfCpltCallback(). - Exception done for MspInit and MspDeInit functions that are respectively - reset to the legacy weak functions in the HAL_UART_Init() - and HAL_UART_DeInit() only when these callbacks are null (not registered beforehand). - If not, MspInit or MspDeInit are not null, the HAL_UART_Init() and HAL_UART_DeInit() - keep and use the user MspInit/MspDeInit callbacks (registered beforehand). - - [..] - Callbacks can be registered/unregistered in HAL_UART_STATE_READY state only. - Exception done MspInit/MspDeInit that can be registered/unregistered - in HAL_UART_STATE_READY or HAL_UART_STATE_RESET state, thus registered (user) - MspInit/DeInit callbacks can be used during the Init/DeInit. - In that case first register the MspInit/MspDeInit user callbacks - using HAL_UART_RegisterCallback() before calling HAL_UART_DeInit() - or HAL_UART_Init() function. - - [..] - When The compilation define USE_HAL_UART_REGISTER_CALLBACKS is set to 0 or - not defined, the callback registration feature is not available - and weak callbacks are used. - - - @endverbatim - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f3xx_hal.h" - -/** @addtogroup STM32F3xx_HAL_Driver - * @{ - */ - -/** @defgroup UART UART - * @brief HAL UART module driver - * @{ - */ - -#ifdef HAL_UART_MODULE_ENABLED - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -/** @defgroup UART_Private_Constants UART Private Constants - * @{ - */ -#define USART_CR1_FIELDS ((uint32_t)(USART_CR1_M | USART_CR1_PCE | USART_CR1_PS | USART_CR1_TE | USART_CR1_RE | \ - USART_CR1_OVER8)) /*!< UART or USART CR1 fields of parameters set by UART_SetConfig API */ - -#define USART_CR3_FIELDS ((uint32_t)(USART_CR3_RTSE | USART_CR3_CTSE |\ - USART_CR3_ONEBIT)) /*!< UART or USART CR3 fields of parameters set by UART_SetConfig API */ - - -#define UART_BRR_MIN 0x10U /* UART BRR minimum authorized value */ -#define UART_BRR_MAX 0x0000FFFFU /* UART BRR maximum authorized value */ -/** - * @} - */ - -/* Private macros ------------------------------------------------------------*/ -/* Private function prototypes -----------------------------------------------*/ -/** @addtogroup UART_Private_Functions - * @{ - */ -static void UART_EndRxTransfer(UART_HandleTypeDef *huart); -static void UART_EndTxTransfer(UART_HandleTypeDef *huart); -static void UART_DMATransmitCplt(DMA_HandleTypeDef *hdma); -static void UART_DMAReceiveCplt(DMA_HandleTypeDef *hdma); -static void UART_DMARxHalfCplt(DMA_HandleTypeDef *hdma); -static void UART_DMATxHalfCplt(DMA_HandleTypeDef *hdma); -static void UART_DMAError(DMA_HandleTypeDef *hdma); -static void UART_DMAAbortOnError(DMA_HandleTypeDef *hdma); -static void UART_DMATxAbortCallback(DMA_HandleTypeDef *hdma); -static void UART_DMARxAbortCallback(DMA_HandleTypeDef *hdma); -static void UART_DMATxOnlyAbortCallback(DMA_HandleTypeDef *hdma); -static void UART_DMARxOnlyAbortCallback(DMA_HandleTypeDef *hdma); -static void UART_TxISR_8BIT(UART_HandleTypeDef *huart); -static void UART_TxISR_16BIT(UART_HandleTypeDef *huart); -static void UART_EndTransmit_IT(UART_HandleTypeDef *huart); -static void UART_RxISR_8BIT(UART_HandleTypeDef *huart); -static void UART_RxISR_16BIT(UART_HandleTypeDef *huart); -/** - * @} - */ - -/* Private variables ---------------------------------------------------------*/ -/* Exported Constants --------------------------------------------------------*/ -/* Exported functions --------------------------------------------------------*/ - -/** @defgroup UART_Exported_Functions UART Exported Functions - * @{ - */ - -/** @defgroup UART_Exported_Functions_Group1 Initialization and de-initialization functions - * @brief Initialization and Configuration functions - * -@verbatim -=============================================================================== - ##### Initialization and Configuration functions ##### - =============================================================================== - [..] - This subsection provides a set of functions allowing to initialize the USARTx or the UARTy - in asynchronous mode. - (+) For the asynchronous mode the parameters below can be configured: - (++) Baud Rate - (++) Word Length - (++) Stop Bit - (++) Parity: If the parity is enabled, then the MSB bit of the data written - in the data register is transmitted but is changed by the parity bit. - (++) Hardware flow control - (++) Receiver/transmitter modes - (++) Over Sampling Method - (++) One-Bit Sampling Method - (+) For the asynchronous mode, the following advanced features can be configured as well: - (++) TX and/or RX pin level inversion - (++) data logical level inversion - (++) RX and TX pins swap - (++) RX overrun detection disabling - (++) DMA disabling on RX error - (++) MSB first on communication line - (++) auto Baud rate detection - [..] - The HAL_UART_Init(), HAL_HalfDuplex_Init(), HAL_LIN_Init()and HAL_MultiProcessor_Init()API - follow respectively the UART asynchronous, UART Half duplex, UART LIN mode - and UART multiprocessor mode configuration procedures (details for the procedures - are available in reference manual). - -@endverbatim - - Depending on the frame length defined by the M1 and M0 bits (7-bit, - 8-bit or 9-bit), the possible UART formats are listed in the - following table. - - Table 1. UART frame format. - +-----------------------------------------------------------------------+ - | M1 bit | M0 bit | PCE bit | UART frame | - |---------|---------|-----------|---------------------------------------| - | 0 | 0 | 0 | | SB | 8 bit data | STB | | - |---------|---------|-----------|---------------------------------------| - | 0 | 0 | 1 | | SB | 7 bit data | PB | STB | | - |---------|---------|-----------|---------------------------------------| - | 0 | 1 | 0 | | SB | 9 bit data | STB | | - |---------|---------|-----------|---------------------------------------| - | 0 | 1 | 1 | | SB | 8 bit data | PB | STB | | - |---------|---------|-----------|---------------------------------------| - | 1 | 0 | 0 | | SB | 7 bit data | STB | | - |---------|---------|-----------|---------------------------------------| - | 1 | 0 | 1 | | SB | 6 bit data | PB | STB | | - +-----------------------------------------------------------------------+ - - * @{ - */ - -/** - * @brief Initialize the UART mode according to the specified - * parameters in the UART_InitTypeDef and initialize the associated handle. - * @param huart UART handle. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_UART_Init(UART_HandleTypeDef *huart) -{ - /* Check the UART handle allocation */ - if (huart == NULL) - { - return HAL_ERROR; - } - - if (huart->Init.HwFlowCtl != UART_HWCONTROL_NONE) - { - /* Check the parameters */ - assert_param(IS_UART_HWFLOW_INSTANCE(huart->Instance)); - } - else - { - /* Check the parameters */ - assert_param(IS_UART_INSTANCE(huart->Instance)); - } - - if (huart->gState == HAL_UART_STATE_RESET) - { - /* Allocate lock resource and initialize it */ - huart->Lock = HAL_UNLOCKED; - -#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) - UART_InitCallbacksToDefault(huart); - - if (huart->MspInitCallback == NULL) - { - huart->MspInitCallback = HAL_UART_MspInit; - } - - /* Init the low level hardware */ - huart->MspInitCallback(huart); -#else - /* Init the low level hardware : GPIO, CLOCK */ - HAL_UART_MspInit(huart); -#endif /* (USE_HAL_UART_REGISTER_CALLBACKS) */ - } - - huart->gState = HAL_UART_STATE_BUSY; - - __HAL_UART_DISABLE(huart); - - /* Perform advanced settings configuration */ - /* For some items, configuration requires to be done prior TE and RE bits are set */ - if (huart->AdvancedInit.AdvFeatureInit != UART_ADVFEATURE_NO_INIT) - { - UART_AdvFeatureConfig(huart); - } - - /* Set the UART Communication parameters */ - if (UART_SetConfig(huart) == HAL_ERROR) - { - return HAL_ERROR; - } - - /* In asynchronous mode, the following bits must be kept cleared: - - LINEN and CLKEN bits in the USART_CR2 register, - - SCEN, HDSEL and IREN bits in the USART_CR3 register.*/ - CLEAR_BIT(huart->Instance->CR2, (USART_CR2_LINEN | USART_CR2_CLKEN)); - CLEAR_BIT(huart->Instance->CR3, (USART_CR3_SCEN | USART_CR3_HDSEL | USART_CR3_IREN)); - - __HAL_UART_ENABLE(huart); - - /* TEACK and/or REACK to check before moving huart->gState and huart->RxState to Ready */ - return (UART_CheckIdleState(huart)); -} - -/** - * @brief Initialize the half-duplex mode according to the specified - * parameters in the UART_InitTypeDef and creates the associated handle. - * @param huart UART handle. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_HalfDuplex_Init(UART_HandleTypeDef *huart) -{ - /* Check the UART handle allocation */ - if (huart == NULL) - { - return HAL_ERROR; - } - - /* Check UART instance */ - assert_param(IS_UART_HALFDUPLEX_INSTANCE(huart->Instance)); - - if (huart->gState == HAL_UART_STATE_RESET) - { - /* Allocate lock resource and initialize it */ - huart->Lock = HAL_UNLOCKED; - -#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) - UART_InitCallbacksToDefault(huart); - - if (huart->MspInitCallback == NULL) - { - huart->MspInitCallback = HAL_UART_MspInit; - } - - /* Init the low level hardware */ - huart->MspInitCallback(huart); -#else - /* Init the low level hardware : GPIO, CLOCK */ - HAL_UART_MspInit(huart); -#endif /* (USE_HAL_UART_REGISTER_CALLBACKS) */ - } - - huart->gState = HAL_UART_STATE_BUSY; - - __HAL_UART_DISABLE(huart); - - /* Perform advanced settings configuration */ - /* For some items, configuration requires to be done prior TE and RE bits are set */ - if (huart->AdvancedInit.AdvFeatureInit != UART_ADVFEATURE_NO_INIT) - { - UART_AdvFeatureConfig(huart); - } - - /* Set the UART Communication parameters */ - if (UART_SetConfig(huart) == HAL_ERROR) - { - return HAL_ERROR; - } - - /* In half-duplex mode, the following bits must be kept cleared: - - LINEN and CLKEN bits in the USART_CR2 register, - - SCEN and IREN bits in the USART_CR3 register.*/ - CLEAR_BIT(huart->Instance->CR2, (USART_CR2_LINEN | USART_CR2_CLKEN)); - CLEAR_BIT(huart->Instance->CR3, (USART_CR3_IREN | USART_CR3_SCEN)); - - /* Enable the Half-Duplex mode by setting the HDSEL bit in the CR3 register */ - SET_BIT(huart->Instance->CR3, USART_CR3_HDSEL); - - __HAL_UART_ENABLE(huart); - - /* TEACK and/or REACK to check before moving huart->gState and huart->RxState to Ready */ - return (UART_CheckIdleState(huart)); -} - - -/** - * @brief Initialize the LIN mode according to the specified - * parameters in the UART_InitTypeDef and creates the associated handle. - * @param huart UART handle. - * @param BreakDetectLength Specifies the LIN break detection length. - * This parameter can be one of the following values: - * @arg @ref UART_LINBREAKDETECTLENGTH_10B 10-bit break detection - * @arg @ref UART_LINBREAKDETECTLENGTH_11B 11-bit break detection - * @retval HAL status - */ -HAL_StatusTypeDef HAL_LIN_Init(UART_HandleTypeDef *huart, uint32_t BreakDetectLength) -{ - /* Check the UART handle allocation */ - if (huart == NULL) - { - return HAL_ERROR; - } - - /* Check the LIN UART instance */ - assert_param(IS_UART_LIN_INSTANCE(huart->Instance)); - /* Check the Break detection length parameter */ - assert_param(IS_UART_LIN_BREAK_DETECT_LENGTH(BreakDetectLength)); - - /* LIN mode limited to 16-bit oversampling only */ - if (huart->Init.OverSampling == UART_OVERSAMPLING_8) - { - return HAL_ERROR; - } - /* LIN mode limited to 8-bit data length */ - if (huart->Init.WordLength != UART_WORDLENGTH_8B) - { - return HAL_ERROR; - } - - if (huart->gState == HAL_UART_STATE_RESET) - { - /* Allocate lock resource and initialize it */ - huart->Lock = HAL_UNLOCKED; - -#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) - UART_InitCallbacksToDefault(huart); - - if (huart->MspInitCallback == NULL) - { - huart->MspInitCallback = HAL_UART_MspInit; - } - - /* Init the low level hardware */ - huart->MspInitCallback(huart); -#else - /* Init the low level hardware : GPIO, CLOCK */ - HAL_UART_MspInit(huart); -#endif /* (USE_HAL_UART_REGISTER_CALLBACKS) */ - } - - huart->gState = HAL_UART_STATE_BUSY; - - __HAL_UART_DISABLE(huart); - - /* Perform advanced settings configuration */ - /* For some items, configuration requires to be done prior TE and RE bits are set */ - if (huart->AdvancedInit.AdvFeatureInit != UART_ADVFEATURE_NO_INIT) - { - UART_AdvFeatureConfig(huart); - } - - /* Set the UART Communication parameters */ - if (UART_SetConfig(huart) == HAL_ERROR) - { - return HAL_ERROR; - } - - /* In LIN mode, the following bits must be kept cleared: - - LINEN and CLKEN bits in the USART_CR2 register, - - SCEN and IREN bits in the USART_CR3 register.*/ - CLEAR_BIT(huart->Instance->CR2, USART_CR2_CLKEN); - CLEAR_BIT(huart->Instance->CR3, (USART_CR3_HDSEL | USART_CR3_IREN | USART_CR3_SCEN)); - - /* Enable the LIN mode by setting the LINEN bit in the CR2 register */ - SET_BIT(huart->Instance->CR2, USART_CR2_LINEN); - - /* Set the USART LIN Break detection length. */ - MODIFY_REG(huart->Instance->CR2, USART_CR2_LBDL, BreakDetectLength); - - __HAL_UART_ENABLE(huart); - - /* TEACK and/or REACK to check before moving huart->gState and huart->RxState to Ready */ - return (UART_CheckIdleState(huart)); -} - - -/** - * @brief Initialize the multiprocessor mode according to the specified - * parameters in the UART_InitTypeDef and initialize the associated handle. - * @param huart UART handle. - * @param Address UART node address (4-, 6-, 7- or 8-bit long). - * @param WakeUpMethod Specifies the UART wakeup method. - * This parameter can be one of the following values: - * @arg @ref UART_WAKEUPMETHOD_IDLELINE WakeUp by an idle line detection - * @arg @ref UART_WAKEUPMETHOD_ADDRESSMARK WakeUp by an address mark - * @note If the user resorts to idle line detection wake up, the Address parameter - * is useless and ignored by the initialization function. - * @note If the user resorts to address mark wake up, the address length detection - * is configured by default to 4 bits only. For the UART to be able to - * manage 6-, 7- or 8-bit long addresses detection, the API - * HAL_MultiProcessorEx_AddressLength_Set() must be called after - * HAL_MultiProcessor_Init(). - * @retval HAL status - */ -HAL_StatusTypeDef HAL_MultiProcessor_Init(UART_HandleTypeDef *huart, uint8_t Address, uint32_t WakeUpMethod) -{ - /* Check the UART handle allocation */ - if (huart == NULL) - { - return HAL_ERROR; - } - - /* Check the wake up method parameter */ - assert_param(IS_UART_WAKEUPMETHOD(WakeUpMethod)); - - if (huart->gState == HAL_UART_STATE_RESET) - { - /* Allocate lock resource and initialize it */ - huart->Lock = HAL_UNLOCKED; - -#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) - UART_InitCallbacksToDefault(huart); - - if (huart->MspInitCallback == NULL) - { - huart->MspInitCallback = HAL_UART_MspInit; - } - - /* Init the low level hardware */ - huart->MspInitCallback(huart); -#else - /* Init the low level hardware : GPIO, CLOCK */ - HAL_UART_MspInit(huart); -#endif /* (USE_HAL_UART_REGISTER_CALLBACKS) */ - } - - huart->gState = HAL_UART_STATE_BUSY; - - __HAL_UART_DISABLE(huart); - - /* Perform advanced settings configuration */ - /* For some items, configuration requires to be done prior TE and RE bits are set */ - if (huart->AdvancedInit.AdvFeatureInit != UART_ADVFEATURE_NO_INIT) - { - UART_AdvFeatureConfig(huart); - } - - /* Set the UART Communication parameters */ - if (UART_SetConfig(huart) == HAL_ERROR) - { - return HAL_ERROR; - } - - /* In multiprocessor mode, the following bits must be kept cleared: - - LINEN and CLKEN bits in the USART_CR2 register, - - SCEN, HDSEL and IREN bits in the USART_CR3 register. */ - CLEAR_BIT(huart->Instance->CR2, (USART_CR2_LINEN | USART_CR2_CLKEN)); - CLEAR_BIT(huart->Instance->CR3, (USART_CR3_SCEN | USART_CR3_HDSEL | USART_CR3_IREN)); - - if (WakeUpMethod == UART_WAKEUPMETHOD_ADDRESSMARK) - { - /* If address mark wake up method is chosen, set the USART address node */ - MODIFY_REG(huart->Instance->CR2, USART_CR2_ADD, ((uint32_t)Address << UART_CR2_ADDRESS_LSB_POS)); - } - - /* Set the wake up method by setting the WAKE bit in the CR1 register */ - MODIFY_REG(huart->Instance->CR1, USART_CR1_WAKE, WakeUpMethod); - - __HAL_UART_ENABLE(huart); - - /* TEACK and/or REACK to check before moving huart->gState and huart->RxState to Ready */ - return (UART_CheckIdleState(huart)); -} - - -/** - * @brief DeInitialize the UART peripheral. - * @param huart UART handle. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_UART_DeInit(UART_HandleTypeDef *huart) -{ - /* Check the UART handle allocation */ - if (huart == NULL) - { - return HAL_ERROR; - } - - /* Check the parameters */ - assert_param(IS_UART_INSTANCE(huart->Instance)); - - huart->gState = HAL_UART_STATE_BUSY; - - __HAL_UART_DISABLE(huart); - - huart->Instance->CR1 = 0x0U; - huart->Instance->CR2 = 0x0U; - huart->Instance->CR3 = 0x0U; - -#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) - if (huart->MspDeInitCallback == NULL) - { - huart->MspDeInitCallback = HAL_UART_MspDeInit; - } - /* DeInit the low level hardware */ - huart->MspDeInitCallback(huart); -#else - /* DeInit the low level hardware */ - HAL_UART_MspDeInit(huart); -#endif /* (USE_HAL_UART_REGISTER_CALLBACKS) */ - - huart->ErrorCode = HAL_UART_ERROR_NONE; - huart->gState = HAL_UART_STATE_RESET; - huart->RxState = HAL_UART_STATE_RESET; - huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; - huart->RxEventType = HAL_UART_RXEVENT_TC; - - __HAL_UNLOCK(huart); - - return HAL_OK; -} - -/** - * @brief Initialize the UART MSP. - * @param huart UART handle. - * @retval None - */ -__weak void HAL_UART_MspInit(UART_HandleTypeDef *huart) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(huart); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_UART_MspInit can be implemented in the user file - */ -} - -/** - * @brief DeInitialize the UART MSP. - * @param huart UART handle. - * @retval None - */ -__weak void HAL_UART_MspDeInit(UART_HandleTypeDef *huart) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(huart); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_UART_MspDeInit can be implemented in the user file - */ -} - -#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) -/** - * @brief Register a User UART Callback - * To be used to override the weak predefined callback - * @note The HAL_UART_RegisterCallback() may be called before HAL_UART_Init(), HAL_HalfDuplex_Init(), - * HAL_LIN_Init(), HAL_MultiProcessor_Init() or HAL_RS485Ex_Init() in HAL_UART_STATE_RESET to register - * callbacks for HAL_UART_MSPINIT_CB_ID and HAL_UART_MSPDEINIT_CB_ID - * @param huart uart handle - * @param CallbackID ID of the callback to be registered - * This parameter can be one of the following values: - * @arg @ref HAL_UART_TX_HALFCOMPLETE_CB_ID Tx Half Complete Callback ID - * @arg @ref HAL_UART_TX_COMPLETE_CB_ID Tx Complete Callback ID - * @arg @ref HAL_UART_RX_HALFCOMPLETE_CB_ID Rx Half Complete Callback ID - * @arg @ref HAL_UART_RX_COMPLETE_CB_ID Rx Complete Callback ID - * @arg @ref HAL_UART_ERROR_CB_ID Error Callback ID - * @arg @ref HAL_UART_ABORT_COMPLETE_CB_ID Abort Complete Callback ID - * @arg @ref HAL_UART_ABORT_TRANSMIT_COMPLETE_CB_ID Abort Transmit Complete Callback ID - * @arg @ref HAL_UART_ABORT_RECEIVE_COMPLETE_CB_ID Abort Receive Complete Callback ID - * @arg @ref HAL_UART_WAKEUP_CB_ID Wakeup Callback ID - * @arg @ref HAL_UART_MSPINIT_CB_ID MspInit Callback ID - * @arg @ref HAL_UART_MSPDEINIT_CB_ID MspDeInit Callback ID - * @param pCallback pointer to the Callback function - * @retval HAL status - */ -HAL_StatusTypeDef HAL_UART_RegisterCallback(UART_HandleTypeDef *huart, HAL_UART_CallbackIDTypeDef CallbackID, - pUART_CallbackTypeDef pCallback) -{ - HAL_StatusTypeDef status = HAL_OK; - - if (pCallback == NULL) - { - huart->ErrorCode |= HAL_UART_ERROR_INVALID_CALLBACK; - - return HAL_ERROR; - } - - if (huart->gState == HAL_UART_STATE_READY) - { - switch (CallbackID) - { - case HAL_UART_TX_HALFCOMPLETE_CB_ID : - huart->TxHalfCpltCallback = pCallback; - break; - - case HAL_UART_TX_COMPLETE_CB_ID : - huart->TxCpltCallback = pCallback; - break; - - case HAL_UART_RX_HALFCOMPLETE_CB_ID : - huart->RxHalfCpltCallback = pCallback; - break; - - case HAL_UART_RX_COMPLETE_CB_ID : - huart->RxCpltCallback = pCallback; - break; - - case HAL_UART_ERROR_CB_ID : - huart->ErrorCallback = pCallback; - break; - - case HAL_UART_ABORT_COMPLETE_CB_ID : - huart->AbortCpltCallback = pCallback; - break; - - case HAL_UART_ABORT_TRANSMIT_COMPLETE_CB_ID : - huart->AbortTransmitCpltCallback = pCallback; - break; - - case HAL_UART_ABORT_RECEIVE_COMPLETE_CB_ID : - huart->AbortReceiveCpltCallback = pCallback; - break; - - case HAL_UART_WAKEUP_CB_ID : - huart->WakeupCallback = pCallback; - break; - - - case HAL_UART_MSPINIT_CB_ID : - huart->MspInitCallback = pCallback; - break; - - case HAL_UART_MSPDEINIT_CB_ID : - huart->MspDeInitCallback = pCallback; - break; - - default : - huart->ErrorCode |= HAL_UART_ERROR_INVALID_CALLBACK; - - status = HAL_ERROR; - break; - } - } - else if (huart->gState == HAL_UART_STATE_RESET) - { - switch (CallbackID) - { - case HAL_UART_MSPINIT_CB_ID : - huart->MspInitCallback = pCallback; - break; - - case HAL_UART_MSPDEINIT_CB_ID : - huart->MspDeInitCallback = pCallback; - break; - - default : - huart->ErrorCode |= HAL_UART_ERROR_INVALID_CALLBACK; - - status = HAL_ERROR; - break; - } - } - else - { - huart->ErrorCode |= HAL_UART_ERROR_INVALID_CALLBACK; - - status = HAL_ERROR; - } - - return status; -} - -/** - * @brief Unregister an UART Callback - * UART callaback is redirected to the weak predefined callback - * @note The HAL_UART_UnRegisterCallback() may be called before HAL_UART_Init(), HAL_HalfDuplex_Init(), - * HAL_LIN_Init(), HAL_MultiProcessor_Init() or HAL_RS485Ex_Init() in HAL_UART_STATE_RESET to un-register - * callbacks for HAL_UART_MSPINIT_CB_ID and HAL_UART_MSPDEINIT_CB_ID - * @param huart uart handle - * @param CallbackID ID of the callback to be unregistered - * This parameter can be one of the following values: - * @arg @ref HAL_UART_TX_HALFCOMPLETE_CB_ID Tx Half Complete Callback ID - * @arg @ref HAL_UART_TX_COMPLETE_CB_ID Tx Complete Callback ID - * @arg @ref HAL_UART_RX_HALFCOMPLETE_CB_ID Rx Half Complete Callback ID - * @arg @ref HAL_UART_RX_COMPLETE_CB_ID Rx Complete Callback ID - * @arg @ref HAL_UART_ERROR_CB_ID Error Callback ID - * @arg @ref HAL_UART_ABORT_COMPLETE_CB_ID Abort Complete Callback ID - * @arg @ref HAL_UART_ABORT_TRANSMIT_COMPLETE_CB_ID Abort Transmit Complete Callback ID - * @arg @ref HAL_UART_ABORT_RECEIVE_COMPLETE_CB_ID Abort Receive Complete Callback ID - * @arg @ref HAL_UART_WAKEUP_CB_ID Wakeup Callback ID - * @arg @ref HAL_UART_MSPINIT_CB_ID MspInit Callback ID - * @arg @ref HAL_UART_MSPDEINIT_CB_ID MspDeInit Callback ID - * @retval HAL status - */ -HAL_StatusTypeDef HAL_UART_UnRegisterCallback(UART_HandleTypeDef *huart, HAL_UART_CallbackIDTypeDef CallbackID) -{ - HAL_StatusTypeDef status = HAL_OK; - - if (HAL_UART_STATE_READY == huart->gState) - { - switch (CallbackID) - { - case HAL_UART_TX_HALFCOMPLETE_CB_ID : - huart->TxHalfCpltCallback = HAL_UART_TxHalfCpltCallback; /* Legacy weak TxHalfCpltCallback */ - break; - - case HAL_UART_TX_COMPLETE_CB_ID : - huart->TxCpltCallback = HAL_UART_TxCpltCallback; /* Legacy weak TxCpltCallback */ - break; - - case HAL_UART_RX_HALFCOMPLETE_CB_ID : - huart->RxHalfCpltCallback = HAL_UART_RxHalfCpltCallback; /* Legacy weak RxHalfCpltCallback */ - break; - - case HAL_UART_RX_COMPLETE_CB_ID : - huart->RxCpltCallback = HAL_UART_RxCpltCallback; /* Legacy weak RxCpltCallback */ - break; - - case HAL_UART_ERROR_CB_ID : - huart->ErrorCallback = HAL_UART_ErrorCallback; /* Legacy weak ErrorCallback */ - break; - - case HAL_UART_ABORT_COMPLETE_CB_ID : - huart->AbortCpltCallback = HAL_UART_AbortCpltCallback; /* Legacy weak AbortCpltCallback */ - break; - - case HAL_UART_ABORT_TRANSMIT_COMPLETE_CB_ID : - huart->AbortTransmitCpltCallback = HAL_UART_AbortTransmitCpltCallback; /* Legacy weak - AbortTransmitCpltCallback */ - break; - - case HAL_UART_ABORT_RECEIVE_COMPLETE_CB_ID : - huart->AbortReceiveCpltCallback = HAL_UART_AbortReceiveCpltCallback; /* Legacy weak - AbortReceiveCpltCallback */ - break; - - case HAL_UART_WAKEUP_CB_ID : - huart->WakeupCallback = HAL_UARTEx_WakeupCallback; /* Legacy weak WakeupCallback */ - break; - - case HAL_UART_MSPINIT_CB_ID : - huart->MspInitCallback = HAL_UART_MspInit; /* Legacy weak MspInitCallback */ - break; - - case HAL_UART_MSPDEINIT_CB_ID : - huart->MspDeInitCallback = HAL_UART_MspDeInit; /* Legacy weak MspDeInitCallback */ - break; - - default : - huart->ErrorCode |= HAL_UART_ERROR_INVALID_CALLBACK; - - status = HAL_ERROR; - break; - } - } - else if (HAL_UART_STATE_RESET == huart->gState) - { - switch (CallbackID) - { - case HAL_UART_MSPINIT_CB_ID : - huart->MspInitCallback = HAL_UART_MspInit; - break; - - case HAL_UART_MSPDEINIT_CB_ID : - huart->MspDeInitCallback = HAL_UART_MspDeInit; - break; - - default : - huart->ErrorCode |= HAL_UART_ERROR_INVALID_CALLBACK; - - status = HAL_ERROR; - break; - } - } - else - { - huart->ErrorCode |= HAL_UART_ERROR_INVALID_CALLBACK; - - status = HAL_ERROR; - } - - return status; -} - -/** - * @brief Register a User UART Rx Event Callback - * To be used instead of the weak predefined callback - * @param huart Uart handle - * @param pCallback Pointer to the Rx Event Callback function - * @retval HAL status - */ -HAL_StatusTypeDef HAL_UART_RegisterRxEventCallback(UART_HandleTypeDef *huart, pUART_RxEventCallbackTypeDef pCallback) -{ - HAL_StatusTypeDef status = HAL_OK; - - if (pCallback == NULL) - { - huart->ErrorCode |= HAL_UART_ERROR_INVALID_CALLBACK; - - return HAL_ERROR; - } - - if (huart->RxState == HAL_UART_STATE_READY) - { - huart->RxEventCallback = pCallback; - } - else - { - huart->ErrorCode |= HAL_UART_ERROR_INVALID_CALLBACK; - - status = HAL_ERROR; - } - - return status; -} - -/** - * @brief UnRegister the UART Rx Event Callback - * UART Rx Event Callback is redirected to the weak HAL_UARTEx_RxEventCallback() predefined callback - * @param huart Uart handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_UART_UnRegisterRxEventCallback(UART_HandleTypeDef *huart) -{ - HAL_StatusTypeDef status = HAL_OK; - - if (huart->RxState == HAL_UART_STATE_READY) - { - huart->RxEventCallback = HAL_UARTEx_RxEventCallback; /* Legacy weak UART Rx Event Callback */ - } - else - { - huart->ErrorCode |= HAL_UART_ERROR_INVALID_CALLBACK; - - status = HAL_ERROR; - } - - return status; -} - -#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ - -/** - * @} - */ - -/** @defgroup UART_Exported_Functions_Group2 IO operation functions - * @brief UART Transmit/Receive functions - * -@verbatim - =============================================================================== - ##### IO operation functions ##### - =============================================================================== - This subsection provides a set of functions allowing to manage the UART asynchronous - and Half duplex data transfers. - - (#) There are two mode of transfer: - (+) Blocking mode: The communication is performed in polling mode. - The HAL status of all data processing is returned by the same function - after finishing transfer. - (+) Non-Blocking mode: The communication is performed using Interrupts - or DMA, These API's return the HAL status. - The end of the data processing will be indicated through the - dedicated UART IRQ when using Interrupt mode or the DMA IRQ when - using DMA mode. - The HAL_UART_TxCpltCallback(), HAL_UART_RxCpltCallback() user callbacks - will be executed respectively at the end of the transmit or Receive process - The HAL_UART_ErrorCallback()user callback will be executed when a communication error is detected - - (#) Blocking mode API's are : - (+) HAL_UART_Transmit() - (+) HAL_UART_Receive() - - (#) Non-Blocking mode API's with Interrupt are : - (+) HAL_UART_Transmit_IT() - (+) HAL_UART_Receive_IT() - (+) HAL_UART_IRQHandler() - - (#) Non-Blocking mode API's with DMA are : - (+) HAL_UART_Transmit_DMA() - (+) HAL_UART_Receive_DMA() - (+) HAL_UART_DMAPause() - (+) HAL_UART_DMAResume() - (+) HAL_UART_DMAStop() - - (#) A set of Transfer Complete Callbacks are provided in Non_Blocking mode: - (+) HAL_UART_TxHalfCpltCallback() - (+) HAL_UART_TxCpltCallback() - (+) HAL_UART_RxHalfCpltCallback() - (+) HAL_UART_RxCpltCallback() - (+) HAL_UART_ErrorCallback() - - (#) Non-Blocking mode transfers could be aborted using Abort API's : - (+) HAL_UART_Abort() - (+) HAL_UART_AbortTransmit() - (+) HAL_UART_AbortReceive() - (+) HAL_UART_Abort_IT() - (+) HAL_UART_AbortTransmit_IT() - (+) HAL_UART_AbortReceive_IT() - - (#) For Abort services based on interrupts (HAL_UART_Abortxxx_IT), a set of Abort Complete Callbacks are provided: - (+) HAL_UART_AbortCpltCallback() - (+) HAL_UART_AbortTransmitCpltCallback() - (+) HAL_UART_AbortReceiveCpltCallback() - - (#) A Rx Event Reception Callback (Rx event notification) is available for Non_Blocking modes of enhanced - reception services: - (+) HAL_UARTEx_RxEventCallback() - - (#) In Non-Blocking mode transfers, possible errors are split into 2 categories. - Errors are handled as follows : - (+) Error is considered as Recoverable and non blocking : Transfer could go till end, but error severity is - to be evaluated by user : this concerns Frame Error, Parity Error or Noise Error - in Interrupt mode reception . - Received character is then retrieved and stored in Rx buffer, Error code is set to allow user - to identify error type, and HAL_UART_ErrorCallback() user callback is executed. - Transfer is kept ongoing on UART side. - If user wants to abort it, Abort services should be called by user. - (+) Error is considered as Blocking : Transfer could not be completed properly and is aborted. - This concerns Overrun Error In Interrupt mode reception and all errors in DMA mode. - Error code is set to allow user to identify error type, and HAL_UART_ErrorCallback() - user callback is executed. - - -@- In the Half duplex communication, it is forbidden to run the transmit - and receive process in parallel, the UART state HAL_UART_STATE_BUSY_TX_RX can't be useful. - -@endverbatim - * @{ - */ - -/** - * @brief Send an amount of data in blocking mode. - * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), - * the sent data is handled as a set of u16. In this case, Size must indicate the number - * of u16 provided through pData. - * @param huart UART handle. - * @param pData Pointer to data buffer (u8 or u16 data elements). - * @param Size Amount of data elements (u8 or u16) to be sent. - * @param Timeout Timeout duration. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_UART_Transmit(UART_HandleTypeDef *huart, const uint8_t *pData, uint16_t Size, uint32_t Timeout) -{ - const uint8_t *pdata8bits; - const uint16_t *pdata16bits; - uint32_t tickstart; - - /* Check that a Tx process is not already ongoing */ - if (huart->gState == HAL_UART_STATE_READY) - { - if ((pData == NULL) || (Size == 0U)) - { - return HAL_ERROR; - } - - huart->ErrorCode = HAL_UART_ERROR_NONE; - huart->gState = HAL_UART_STATE_BUSY_TX; - - /* Init tickstart for timeout management */ - tickstart = HAL_GetTick(); - - huart->TxXferSize = Size; - huart->TxXferCount = Size; - - /* In case of 9bits/No Parity transfer, pData needs to be handled as a uint16_t pointer */ - if ((huart->Init.WordLength == UART_WORDLENGTH_9B) && (huart->Init.Parity == UART_PARITY_NONE)) - { - pdata8bits = NULL; - pdata16bits = (const uint16_t *) pData; - } - else - { - pdata8bits = pData; - pdata16bits = NULL; - } - - while (huart->TxXferCount > 0U) - { - if (UART_WaitOnFlagUntilTimeout(huart, UART_FLAG_TXE, RESET, tickstart, Timeout) != HAL_OK) - { - - huart->gState = HAL_UART_STATE_READY; - - return HAL_TIMEOUT; - } - if (pdata8bits == NULL) - { - huart->Instance->TDR = (uint16_t)(*pdata16bits & 0x01FFU); - pdata16bits++; - } - else - { - huart->Instance->TDR = (uint8_t)(*pdata8bits & 0xFFU); - pdata8bits++; - } - huart->TxXferCount--; - } - - if (UART_WaitOnFlagUntilTimeout(huart, UART_FLAG_TC, RESET, tickstart, Timeout) != HAL_OK) - { - huart->gState = HAL_UART_STATE_READY; - - return HAL_TIMEOUT; - } - - /* At end of Tx process, restore huart->gState to Ready */ - huart->gState = HAL_UART_STATE_READY; - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Receive an amount of data in blocking mode. - * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), - * the received data is handled as a set of u16. In this case, Size must indicate the number - * of u16 available through pData. - * @param huart UART handle. - * @param pData Pointer to data buffer (u8 or u16 data elements). - * @param Size Amount of data elements (u8 or u16) to be received. - * @param Timeout Timeout duration. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_UART_Receive(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size, uint32_t Timeout) -{ - uint8_t *pdata8bits; - uint16_t *pdata16bits; - uint16_t uhMask; - uint32_t tickstart; - - /* Check that a Rx process is not already ongoing */ - if (huart->RxState == HAL_UART_STATE_READY) - { - if ((pData == NULL) || (Size == 0U)) - { - return HAL_ERROR; - } - - huart->ErrorCode = HAL_UART_ERROR_NONE; - huart->RxState = HAL_UART_STATE_BUSY_RX; - huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; - - /* Init tickstart for timeout management */ - tickstart = HAL_GetTick(); - - huart->RxXferSize = Size; - huart->RxXferCount = Size; - - /* Computation of UART mask to apply to RDR register */ - UART_MASK_COMPUTATION(huart); - uhMask = huart->Mask; - - /* In case of 9bits/No Parity transfer, pRxData needs to be handled as a uint16_t pointer */ - if ((huart->Init.WordLength == UART_WORDLENGTH_9B) && (huart->Init.Parity == UART_PARITY_NONE)) - { - pdata8bits = NULL; - pdata16bits = (uint16_t *) pData; - } - else - { - pdata8bits = pData; - pdata16bits = NULL; - } - - /* as long as data have to be received */ - while (huart->RxXferCount > 0U) - { - if (UART_WaitOnFlagUntilTimeout(huart, UART_FLAG_RXNE, RESET, tickstart, Timeout) != HAL_OK) - { - huart->RxState = HAL_UART_STATE_READY; - - return HAL_TIMEOUT; - } - if (pdata8bits == NULL) - { - *pdata16bits = (uint16_t)(huart->Instance->RDR & uhMask); - pdata16bits++; - } - else - { - *pdata8bits = (uint8_t)(huart->Instance->RDR & (uint8_t)uhMask); - pdata8bits++; - } - huart->RxXferCount--; - } - - /* At end of Rx process, restore huart->RxState to Ready */ - huart->RxState = HAL_UART_STATE_READY; - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Send an amount of data in interrupt mode. - * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), - * the sent data is handled as a set of u16. In this case, Size must indicate the number - * of u16 provided through pData. - * @param huart UART handle. - * @param pData Pointer to data buffer (u8 or u16 data elements). - * @param Size Amount of data elements (u8 or u16) to be sent. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_UART_Transmit_IT(UART_HandleTypeDef *huart, const uint8_t *pData, uint16_t Size) -{ - /* Check that a Tx process is not already ongoing */ - if (huart->gState == HAL_UART_STATE_READY) - { - if ((pData == NULL) || (Size == 0U)) - { - return HAL_ERROR; - } - - huart->pTxBuffPtr = pData; - huart->TxXferSize = Size; - huart->TxXferCount = Size; - huart->TxISR = NULL; - - huart->ErrorCode = HAL_UART_ERROR_NONE; - huart->gState = HAL_UART_STATE_BUSY_TX; - - /* Set the Tx ISR function pointer according to the data word length */ - if ((huart->Init.WordLength == UART_WORDLENGTH_9B) && (huart->Init.Parity == UART_PARITY_NONE)) - { - huart->TxISR = UART_TxISR_16BIT; - } - else - { - huart->TxISR = UART_TxISR_8BIT; - } - - /* Enable the Transmit Data Register Empty interrupt */ - ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_TXEIE); - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Receive an amount of data in interrupt mode. - * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), - * the received data is handled as a set of u16. In this case, Size must indicate the number - * of u16 available through pData. - * @param huart UART handle. - * @param pData Pointer to data buffer (u8 or u16 data elements). - * @param Size Amount of data elements (u8 or u16) to be received. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_UART_Receive_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size) -{ - /* Check that a Rx process is not already ongoing */ - if (huart->RxState == HAL_UART_STATE_READY) - { - if ((pData == NULL) || (Size == 0U)) - { - return HAL_ERROR; - } - - /* Set Reception type to Standard reception */ - huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; - - /* Check that USART RTOEN bit is set */ - if (READ_BIT(huart->Instance->CR2, USART_CR2_RTOEN) != 0U) - { - /* Enable the UART Receiver Timeout Interrupt */ - ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_RTOIE); - } - - return (UART_Start_Receive_IT(huart, pData, Size)); - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Send an amount of data in DMA mode. - * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), - * the sent data is handled as a set of u16. In this case, Size must indicate the number - * of u16 provided through pData. - * @param huart UART handle. - * @param pData Pointer to data buffer (u8 or u16 data elements). - * @param Size Amount of data elements (u8 or u16) to be sent. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_UART_Transmit_DMA(UART_HandleTypeDef *huart, const uint8_t *pData, uint16_t Size) -{ - /* Check that a Tx process is not already ongoing */ - if (huart->gState == HAL_UART_STATE_READY) - { - if ((pData == NULL) || (Size == 0U)) - { - return HAL_ERROR; - } - - huart->pTxBuffPtr = pData; - huart->TxXferSize = Size; - huart->TxXferCount = Size; - - huart->ErrorCode = HAL_UART_ERROR_NONE; - huart->gState = HAL_UART_STATE_BUSY_TX; - - if (huart->hdmatx != NULL) - { - /* Set the UART DMA transfer complete callback */ - huart->hdmatx->XferCpltCallback = UART_DMATransmitCplt; - - /* Set the UART DMA Half transfer complete callback */ - huart->hdmatx->XferHalfCpltCallback = UART_DMATxHalfCplt; - - /* Set the DMA error callback */ - huart->hdmatx->XferErrorCallback = UART_DMAError; - - /* Set the DMA abort callback */ - huart->hdmatx->XferAbortCallback = NULL; - - /* Enable the UART transmit DMA channel */ - if (HAL_DMA_Start_IT(huart->hdmatx, (uint32_t)huart->pTxBuffPtr, (uint32_t)&huart->Instance->TDR, Size) != HAL_OK) - { - /* Set error code to DMA */ - huart->ErrorCode = HAL_UART_ERROR_DMA; - - /* Restore huart->gState to ready */ - huart->gState = HAL_UART_STATE_READY; - - return HAL_ERROR; - } - } - /* Clear the TC flag in the ICR register */ - __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_TCF); - - /* Enable the DMA transfer for transmit request by setting the DMAT bit - in the UART CR3 register */ - ATOMIC_SET_BIT(huart->Instance->CR3, USART_CR3_DMAT); - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Receive an amount of data in DMA mode. - * @note When the UART parity is enabled (PCE = 1), the received data contain - * the parity bit (MSB position). - * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), - * the received data is handled as a set of u16. In this case, Size must indicate the number - * of u16 available through pData. - * @param huart UART handle. - * @param pData Pointer to data buffer (u8 or u16 data elements). - * @param Size Amount of data elements (u8 or u16) to be received. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_UART_Receive_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size) -{ - /* Check that a Rx process is not already ongoing */ - if (huart->RxState == HAL_UART_STATE_READY) - { - if ((pData == NULL) || (Size == 0U)) - { - return HAL_ERROR; - } - - /* Set Reception type to Standard reception */ - huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; - - /* Check that USART RTOEN bit is set */ - if (READ_BIT(huart->Instance->CR2, USART_CR2_RTOEN) != 0U) - { - /* Enable the UART Receiver Timeout Interrupt */ - ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_RTOIE); - } - - return (UART_Start_Receive_DMA(huart, pData, Size)); - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Pause the DMA Transfer. - * @param huart UART handle. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_UART_DMAPause(UART_HandleTypeDef *huart) -{ - const HAL_UART_StateTypeDef gstate = huart->gState; - const HAL_UART_StateTypeDef rxstate = huart->RxState; - - if ((HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAT)) && - (gstate == HAL_UART_STATE_BUSY_TX)) - { - /* Disable the UART DMA Tx request */ - ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAT); - } - if ((HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR)) && - (rxstate == HAL_UART_STATE_BUSY_RX)) - { - /* Disable PE and ERR (Frame error, noise error, overrun error) interrupts */ - ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_PEIE); - ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE); - - /* Disable the UART DMA Rx request */ - ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR); - } - - return HAL_OK; -} - -/** - * @brief Resume the DMA Transfer. - * @param huart UART handle. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_UART_DMAResume(UART_HandleTypeDef *huart) -{ - if (huart->gState == HAL_UART_STATE_BUSY_TX) - { - /* Enable the UART DMA Tx request */ - ATOMIC_SET_BIT(huart->Instance->CR3, USART_CR3_DMAT); - } - if (huart->RxState == HAL_UART_STATE_BUSY_RX) - { - /* Clear the Overrun flag before resuming the Rx transfer */ - __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_OREF); - - /* Re-enable PE and ERR (Frame error, noise error, overrun error) interrupts */ - if (huart->Init.Parity != UART_PARITY_NONE) - { - ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_PEIE); - } - ATOMIC_SET_BIT(huart->Instance->CR3, USART_CR3_EIE); - - /* Enable the UART DMA Rx request */ - ATOMIC_SET_BIT(huart->Instance->CR3, USART_CR3_DMAR); - } - - return HAL_OK; -} - -/** - * @brief Stop the DMA Transfer. - * @param huart UART handle. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_UART_DMAStop(UART_HandleTypeDef *huart) -{ - /* The Lock is not implemented on this API to allow the user application - to call the HAL UART API under callbacks HAL_UART_TxCpltCallback() / HAL_UART_RxCpltCallback() / - HAL_UART_TxHalfCpltCallback / HAL_UART_RxHalfCpltCallback: - indeed, when HAL_DMA_Abort() API is called, the DMA TX/RX Transfer or Half Transfer complete - interrupt is generated if the DMA transfer interruption occurs at the middle or at the end of - the stream and the corresponding call back is executed. */ - - const HAL_UART_StateTypeDef gstate = huart->gState; - const HAL_UART_StateTypeDef rxstate = huart->RxState; - - /* Stop UART DMA Tx request if ongoing */ - if ((HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAT)) && - (gstate == HAL_UART_STATE_BUSY_TX)) - { - ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAT); - - /* Abort the UART DMA Tx channel */ - if (huart->hdmatx != NULL) - { - if (HAL_DMA_Abort(huart->hdmatx) != HAL_OK) - { - if (HAL_DMA_GetError(huart->hdmatx) == HAL_DMA_ERROR_TIMEOUT) - { - /* Set error code to DMA */ - huart->ErrorCode = HAL_UART_ERROR_DMA; - - return HAL_TIMEOUT; - } - } - } - - UART_EndTxTransfer(huart); - } - - /* Stop UART DMA Rx request if ongoing */ - if ((HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR)) && - (rxstate == HAL_UART_STATE_BUSY_RX)) - { - ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR); - - /* Abort the UART DMA Rx channel */ - if (huart->hdmarx != NULL) - { - if (HAL_DMA_Abort(huart->hdmarx) != HAL_OK) - { - if (HAL_DMA_GetError(huart->hdmarx) == HAL_DMA_ERROR_TIMEOUT) - { - /* Set error code to DMA */ - huart->ErrorCode = HAL_UART_ERROR_DMA; - - return HAL_TIMEOUT; - } - } - } - - UART_EndRxTransfer(huart); - } - - return HAL_OK; -} - -/** - * @brief Abort ongoing transfers (blocking mode). - * @param huart UART handle. - * @note This procedure could be used for aborting any ongoing transfer started in Interrupt or DMA mode. - * This procedure performs following operations : - * - Disable UART Interrupts (Tx and Rx) - * - Disable the DMA transfer in the peripheral register (if enabled) - * - Abort DMA transfer by calling HAL_DMA_Abort (in case of transfer in DMA mode) - * - Set handle State to READY - * @note This procedure is executed in blocking mode : when exiting function, Abort is considered as completed. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_UART_Abort(UART_HandleTypeDef *huart) -{ - /* Disable TXEIE, TCIE, RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts */ - ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE | USART_CR1_PEIE | USART_CR1_TXEIE | USART_CR1_TCIE)); - ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE); - - /* If Reception till IDLE event was ongoing, disable IDLEIE interrupt */ - if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) - { - ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_IDLEIE)); - } - - /* Abort the UART DMA Tx channel if enabled */ - if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAT)) - { - /* Disable the UART DMA Tx request if enabled */ - ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAT); - - /* Abort the UART DMA Tx channel : use blocking DMA Abort API (no callback) */ - if (huart->hdmatx != NULL) - { - /* Set the UART DMA Abort callback to Null. - No call back execution at end of DMA abort procedure */ - huart->hdmatx->XferAbortCallback = NULL; - - if (HAL_DMA_Abort(huart->hdmatx) != HAL_OK) - { - if (HAL_DMA_GetError(huart->hdmatx) == HAL_DMA_ERROR_TIMEOUT) - { - /* Set error code to DMA */ - huart->ErrorCode = HAL_UART_ERROR_DMA; - - return HAL_TIMEOUT; - } - } - } - } - - /* Abort the UART DMA Rx channel if enabled */ - if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR)) - { - /* Disable the UART DMA Rx request if enabled */ - ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR); - - /* Abort the UART DMA Rx channel : use blocking DMA Abort API (no callback) */ - if (huart->hdmarx != NULL) - { - /* Set the UART DMA Abort callback to Null. - No call back execution at end of DMA abort procedure */ - huart->hdmarx->XferAbortCallback = NULL; - - if (HAL_DMA_Abort(huart->hdmarx) != HAL_OK) - { - if (HAL_DMA_GetError(huart->hdmarx) == HAL_DMA_ERROR_TIMEOUT) - { - /* Set error code to DMA */ - huart->ErrorCode = HAL_UART_ERROR_DMA; - - return HAL_TIMEOUT; - } - } - } - } - - /* Reset Tx and Rx transfer counters */ - huart->TxXferCount = 0U; - huart->RxXferCount = 0U; - - /* Clear the Error flags in the ICR register */ - __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_OREF | UART_CLEAR_NEF | UART_CLEAR_PEF | UART_CLEAR_FEF); - - - /* Discard the received data */ - __HAL_UART_SEND_REQ(huart, UART_RXDATA_FLUSH_REQUEST); - - /* Restore huart->gState and huart->RxState to Ready */ - huart->gState = HAL_UART_STATE_READY; - huart->RxState = HAL_UART_STATE_READY; - huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; - - huart->ErrorCode = HAL_UART_ERROR_NONE; - - return HAL_OK; -} - -/** - * @brief Abort ongoing Transmit transfer (blocking mode). - * @param huart UART handle. - * @note This procedure could be used for aborting any ongoing Tx transfer started in Interrupt or DMA mode. - * This procedure performs following operations : - * - Disable UART Interrupts (Tx) - * - Disable the DMA transfer in the peripheral register (if enabled) - * - Abort DMA transfer by calling HAL_DMA_Abort (in case of transfer in DMA mode) - * - Set handle State to READY - * @note This procedure is executed in blocking mode : when exiting function, Abort is considered as completed. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_UART_AbortTransmit(UART_HandleTypeDef *huart) -{ - /* Disable TXEIE and TCIE interrupts */ - ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_TXEIE | USART_CR1_TCIE)); - - /* Abort the UART DMA Tx channel if enabled */ - if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAT)) - { - /* Disable the UART DMA Tx request if enabled */ - ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAT); - - /* Abort the UART DMA Tx channel : use blocking DMA Abort API (no callback) */ - if (huart->hdmatx != NULL) - { - /* Set the UART DMA Abort callback to Null. - No call back execution at end of DMA abort procedure */ - huart->hdmatx->XferAbortCallback = NULL; - - if (HAL_DMA_Abort(huart->hdmatx) != HAL_OK) - { - if (HAL_DMA_GetError(huart->hdmatx) == HAL_DMA_ERROR_TIMEOUT) - { - /* Set error code to DMA */ - huart->ErrorCode = HAL_UART_ERROR_DMA; - - return HAL_TIMEOUT; - } - } - } - } - - /* Reset Tx transfer counter */ - huart->TxXferCount = 0U; - - - /* Restore huart->gState to Ready */ - huart->gState = HAL_UART_STATE_READY; - - return HAL_OK; -} - -/** - * @brief Abort ongoing Receive transfer (blocking mode). - * @param huart UART handle. - * @note This procedure could be used for aborting any ongoing Rx transfer started in Interrupt or DMA mode. - * This procedure performs following operations : - * - Disable UART Interrupts (Rx) - * - Disable the DMA transfer in the peripheral register (if enabled) - * - Abort DMA transfer by calling HAL_DMA_Abort (in case of transfer in DMA mode) - * - Set handle State to READY - * @note This procedure is executed in blocking mode : when exiting function, Abort is considered as completed. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_UART_AbortReceive(UART_HandleTypeDef *huart) -{ - /* Disable RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts */ - ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE | USART_CR1_PEIE)); - ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE); - - /* If Reception till IDLE event was ongoing, disable IDLEIE interrupt */ - if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) - { - ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_IDLEIE)); - } - - /* Abort the UART DMA Rx channel if enabled */ - if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR)) - { - /* Disable the UART DMA Rx request if enabled */ - ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR); - - /* Abort the UART DMA Rx channel : use blocking DMA Abort API (no callback) */ - if (huart->hdmarx != NULL) - { - /* Set the UART DMA Abort callback to Null. - No call back execution at end of DMA abort procedure */ - huart->hdmarx->XferAbortCallback = NULL; - - if (HAL_DMA_Abort(huart->hdmarx) != HAL_OK) - { - if (HAL_DMA_GetError(huart->hdmarx) == HAL_DMA_ERROR_TIMEOUT) - { - /* Set error code to DMA */ - huart->ErrorCode = HAL_UART_ERROR_DMA; - - return HAL_TIMEOUT; - } - } - } - } - - /* Reset Rx transfer counter */ - huart->RxXferCount = 0U; - - /* Clear the Error flags in the ICR register */ - __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_OREF | UART_CLEAR_NEF | UART_CLEAR_PEF | UART_CLEAR_FEF); - - /* Discard the received data */ - __HAL_UART_SEND_REQ(huart, UART_RXDATA_FLUSH_REQUEST); - - /* Restore huart->RxState to Ready */ - huart->RxState = HAL_UART_STATE_READY; - huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; - - return HAL_OK; -} - -/** - * @brief Abort ongoing transfers (Interrupt mode). - * @param huart UART handle. - * @note This procedure could be used for aborting any ongoing transfer started in Interrupt or DMA mode. - * This procedure performs following operations : - * - Disable UART Interrupts (Tx and Rx) - * - Disable the DMA transfer in the peripheral register (if enabled) - * - Abort DMA transfer by calling HAL_DMA_Abort_IT (in case of transfer in DMA mode) - * - Set handle State to READY - * - At abort completion, call user abort complete callback - * @note This procedure is executed in Interrupt mode, meaning that abort procedure could be - * considered as completed only when user abort complete callback is executed (not when exiting function). - * @retval HAL status - */ -HAL_StatusTypeDef HAL_UART_Abort_IT(UART_HandleTypeDef *huart) -{ - uint32_t abortcplt = 1U; - - /* Disable interrupts */ - ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE | USART_CR1_PEIE | USART_CR1_TXEIE | USART_CR1_TCIE)); - ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE); - - /* If Reception till IDLE event was ongoing, disable IDLEIE interrupt */ - if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) - { - ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_IDLEIE)); - } - - /* If DMA Tx and/or DMA Rx Handles are associated to UART Handle, DMA Abort complete callbacks should be initialised - before any call to DMA Abort functions */ - /* DMA Tx Handle is valid */ - if (huart->hdmatx != NULL) - { - /* Set DMA Abort Complete callback if UART DMA Tx request if enabled. - Otherwise, set it to NULL */ - if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAT)) - { - huart->hdmatx->XferAbortCallback = UART_DMATxAbortCallback; - } - else - { - huart->hdmatx->XferAbortCallback = NULL; - } - } - /* DMA Rx Handle is valid */ - if (huart->hdmarx != NULL) - { - /* Set DMA Abort Complete callback if UART DMA Rx request if enabled. - Otherwise, set it to NULL */ - if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR)) - { - huart->hdmarx->XferAbortCallback = UART_DMARxAbortCallback; - } - else - { - huart->hdmarx->XferAbortCallback = NULL; - } - } - - /* Abort the UART DMA Tx channel if enabled */ - if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAT)) - { - /* Disable DMA Tx at UART level */ - ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAT); - - /* Abort the UART DMA Tx channel : use non blocking DMA Abort API (callback) */ - if (huart->hdmatx != NULL) - { - /* UART Tx DMA Abort callback has already been initialised : - will lead to call HAL_UART_AbortCpltCallback() at end of DMA abort procedure */ - - /* Abort DMA TX */ - if (HAL_DMA_Abort_IT(huart->hdmatx) != HAL_OK) - { - huart->hdmatx->XferAbortCallback = NULL; - } - else - { - abortcplt = 0U; - } - } - } - - /* Abort the UART DMA Rx channel if enabled */ - if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR)) - { - /* Disable the UART DMA Rx request if enabled */ - ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR); - - /* Abort the UART DMA Rx channel : use non blocking DMA Abort API (callback) */ - if (huart->hdmarx != NULL) - { - /* UART Rx DMA Abort callback has already been initialised : - will lead to call HAL_UART_AbortCpltCallback() at end of DMA abort procedure */ - - /* Abort DMA RX */ - if (HAL_DMA_Abort_IT(huart->hdmarx) != HAL_OK) - { - huart->hdmarx->XferAbortCallback = NULL; - abortcplt = 1U; - } - else - { - abortcplt = 0U; - } - } - } - - /* if no DMA abort complete callback execution is required => call user Abort Complete callback */ - if (abortcplt == 1U) - { - /* Reset Tx and Rx transfer counters */ - huart->TxXferCount = 0U; - huart->RxXferCount = 0U; - - /* Clear ISR function pointers */ - huart->RxISR = NULL; - huart->TxISR = NULL; - - /* Reset errorCode */ - huart->ErrorCode = HAL_UART_ERROR_NONE; - - /* Clear the Error flags in the ICR register */ - __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_OREF | UART_CLEAR_NEF | UART_CLEAR_PEF | UART_CLEAR_FEF); - - - /* Discard the received data */ - __HAL_UART_SEND_REQ(huart, UART_RXDATA_FLUSH_REQUEST); - - /* Restore huart->gState and huart->RxState to Ready */ - huart->gState = HAL_UART_STATE_READY; - huart->RxState = HAL_UART_STATE_READY; - huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; - - /* As no DMA to be aborted, call directly user Abort complete callback */ -#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) - /* Call registered Abort complete callback */ - huart->AbortCpltCallback(huart); -#else - /* Call legacy weak Abort complete callback */ - HAL_UART_AbortCpltCallback(huart); -#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ - } - - return HAL_OK; -} - -/** - * @brief Abort ongoing Transmit transfer (Interrupt mode). - * @param huart UART handle. - * @note This procedure could be used for aborting any ongoing Tx transfer started in Interrupt or DMA mode. - * This procedure performs following operations : - * - Disable UART Interrupts (Tx) - * - Disable the DMA transfer in the peripheral register (if enabled) - * - Abort DMA transfer by calling HAL_DMA_Abort_IT (in case of transfer in DMA mode) - * - Set handle State to READY - * - At abort completion, call user abort complete callback - * @note This procedure is executed in Interrupt mode, meaning that abort procedure could be - * considered as completed only when user abort complete callback is executed (not when exiting function). - * @retval HAL status - */ -HAL_StatusTypeDef HAL_UART_AbortTransmit_IT(UART_HandleTypeDef *huart) -{ - /* Disable interrupts */ - ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_TXEIE | USART_CR1_TCIE)); - - /* Abort the UART DMA Tx channel if enabled */ - if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAT)) - { - /* Disable the UART DMA Tx request if enabled */ - ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAT); - - /* Abort the UART DMA Tx channel : use non blocking DMA Abort API (callback) */ - if (huart->hdmatx != NULL) - { - /* Set the UART DMA Abort callback : - will lead to call HAL_UART_AbortCpltCallback() at end of DMA abort procedure */ - huart->hdmatx->XferAbortCallback = UART_DMATxOnlyAbortCallback; - - /* Abort DMA TX */ - if (HAL_DMA_Abort_IT(huart->hdmatx) != HAL_OK) - { - /* Call Directly huart->hdmatx->XferAbortCallback function in case of error */ - huart->hdmatx->XferAbortCallback(huart->hdmatx); - } - } - else - { - /* Reset Tx transfer counter */ - huart->TxXferCount = 0U; - - /* Clear TxISR function pointers */ - huart->TxISR = NULL; - - /* Restore huart->gState to Ready */ - huart->gState = HAL_UART_STATE_READY; - - /* As no DMA to be aborted, call directly user Abort complete callback */ -#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) - /* Call registered Abort Transmit Complete Callback */ - huart->AbortTransmitCpltCallback(huart); -#else - /* Call legacy weak Abort Transmit Complete Callback */ - HAL_UART_AbortTransmitCpltCallback(huart); -#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ - } - } - else - { - /* Reset Tx transfer counter */ - huart->TxXferCount = 0U; - - /* Clear TxISR function pointers */ - huart->TxISR = NULL; - - - /* Restore huart->gState to Ready */ - huart->gState = HAL_UART_STATE_READY; - - /* As no DMA to be aborted, call directly user Abort complete callback */ -#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) - /* Call registered Abort Transmit Complete Callback */ - huart->AbortTransmitCpltCallback(huart); -#else - /* Call legacy weak Abort Transmit Complete Callback */ - HAL_UART_AbortTransmitCpltCallback(huart); -#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ - } - - return HAL_OK; -} - -/** - * @brief Abort ongoing Receive transfer (Interrupt mode). - * @param huart UART handle. - * @note This procedure could be used for aborting any ongoing Rx transfer started in Interrupt or DMA mode. - * This procedure performs following operations : - * - Disable UART Interrupts (Rx) - * - Disable the DMA transfer in the peripheral register (if enabled) - * - Abort DMA transfer by calling HAL_DMA_Abort_IT (in case of transfer in DMA mode) - * - Set handle State to READY - * - At abort completion, call user abort complete callback - * @note This procedure is executed in Interrupt mode, meaning that abort procedure could be - * considered as completed only when user abort complete callback is executed (not when exiting function). - * @retval HAL status - */ -HAL_StatusTypeDef HAL_UART_AbortReceive_IT(UART_HandleTypeDef *huart) -{ - /* Disable RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts */ - ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE | USART_CR1_PEIE)); - ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE); - - /* If Reception till IDLE event was ongoing, disable IDLEIE interrupt */ - if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) - { - ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_IDLEIE)); - } - - /* Abort the UART DMA Rx channel if enabled */ - if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR)) - { - /* Disable the UART DMA Rx request if enabled */ - ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR); - - /* Abort the UART DMA Rx channel : use non blocking DMA Abort API (callback) */ - if (huart->hdmarx != NULL) - { - /* Set the UART DMA Abort callback : - will lead to call HAL_UART_AbortCpltCallback() at end of DMA abort procedure */ - huart->hdmarx->XferAbortCallback = UART_DMARxOnlyAbortCallback; - - /* Abort DMA RX */ - if (HAL_DMA_Abort_IT(huart->hdmarx) != HAL_OK) - { - /* Call Directly huart->hdmarx->XferAbortCallback function in case of error */ - huart->hdmarx->XferAbortCallback(huart->hdmarx); - } - } - else - { - /* Reset Rx transfer counter */ - huart->RxXferCount = 0U; - - /* Clear RxISR function pointer */ - huart->pRxBuffPtr = NULL; - - /* Clear the Error flags in the ICR register */ - __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_OREF | UART_CLEAR_NEF | UART_CLEAR_PEF | UART_CLEAR_FEF); - - /* Discard the received data */ - __HAL_UART_SEND_REQ(huart, UART_RXDATA_FLUSH_REQUEST); - - /* Restore huart->RxState to Ready */ - huart->RxState = HAL_UART_STATE_READY; - huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; - - /* As no DMA to be aborted, call directly user Abort complete callback */ -#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) - /* Call registered Abort Receive Complete Callback */ - huart->AbortReceiveCpltCallback(huart); -#else - /* Call legacy weak Abort Receive Complete Callback */ - HAL_UART_AbortReceiveCpltCallback(huart); -#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ - } - } - else - { - /* Reset Rx transfer counter */ - huart->RxXferCount = 0U; - - /* Clear RxISR function pointer */ - huart->pRxBuffPtr = NULL; - - /* Clear the Error flags in the ICR register */ - __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_OREF | UART_CLEAR_NEF | UART_CLEAR_PEF | UART_CLEAR_FEF); - - /* Restore huart->RxState to Ready */ - huart->RxState = HAL_UART_STATE_READY; - huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; - - /* As no DMA to be aborted, call directly user Abort complete callback */ -#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) - /* Call registered Abort Receive Complete Callback */ - huart->AbortReceiveCpltCallback(huart); -#else - /* Call legacy weak Abort Receive Complete Callback */ - HAL_UART_AbortReceiveCpltCallback(huart); -#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ - } - - return HAL_OK; -} - -/** - * @brief Handle UART interrupt request. - * @param huart UART handle. - * @retval None - */ -void HAL_UART_IRQHandler(UART_HandleTypeDef *huart) -{ - uint32_t isrflags = READ_REG(huart->Instance->ISR); - uint32_t cr1its = READ_REG(huart->Instance->CR1); - uint32_t cr3its = READ_REG(huart->Instance->CR3); - - uint32_t errorflags; - uint32_t errorcode; - - /* If no error occurs */ - errorflags = (isrflags & (uint32_t)(USART_ISR_PE | USART_ISR_FE | USART_ISR_ORE | USART_ISR_NE | USART_ISR_RTOF)); - if (errorflags == 0U) - { - /* UART in mode Receiver ---------------------------------------------------*/ - if (((isrflags & USART_ISR_RXNE) != 0U) - && ((cr1its & USART_CR1_RXNEIE) != 0U)) - { - if (huart->RxISR != NULL) - { - huart->RxISR(huart); - } - return; - } - } - - /* If some errors occur */ - if ((errorflags != 0U) - && (((cr3its & USART_CR3_EIE) != 0U) - || ((cr1its & (USART_CR1_RXNEIE | USART_CR1_PEIE | USART_CR1_RTOIE)) != 0U))) - { - /* UART parity error interrupt occurred -------------------------------------*/ - if (((isrflags & USART_ISR_PE) != 0U) && ((cr1its & USART_CR1_PEIE) != 0U)) - { - __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_PEF); - - huart->ErrorCode |= HAL_UART_ERROR_PE; - } - - /* UART frame error interrupt occurred --------------------------------------*/ - if (((isrflags & USART_ISR_FE) != 0U) && ((cr3its & USART_CR3_EIE) != 0U)) - { - __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_FEF); - - huart->ErrorCode |= HAL_UART_ERROR_FE; - } - - /* UART noise error interrupt occurred --------------------------------------*/ - if (((isrflags & USART_ISR_NE) != 0U) && ((cr3its & USART_CR3_EIE) != 0U)) - { - __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_NEF); - - huart->ErrorCode |= HAL_UART_ERROR_NE; - } - - /* UART Over-Run interrupt occurred -----------------------------------------*/ - if (((isrflags & USART_ISR_ORE) != 0U) - && (((cr1its & USART_CR1_RXNEIE) != 0U) || - ((cr3its & USART_CR3_EIE) != 0U))) - { - __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_OREF); - - huart->ErrorCode |= HAL_UART_ERROR_ORE; - } - - /* UART Receiver Timeout interrupt occurred ---------------------------------*/ - if (((isrflags & USART_ISR_RTOF) != 0U) && ((cr1its & USART_CR1_RTOIE) != 0U)) - { - __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_RTOF); - - huart->ErrorCode |= HAL_UART_ERROR_RTO; - } - - /* Call UART Error Call back function if need be ----------------------------*/ - if (huart->ErrorCode != HAL_UART_ERROR_NONE) - { - /* UART in mode Receiver --------------------------------------------------*/ - if (((isrflags & USART_ISR_RXNE) != 0U) - && ((cr1its & USART_CR1_RXNEIE) != 0U)) - { - if (huart->RxISR != NULL) - { - huart->RxISR(huart); - } - } - - /* If Error is to be considered as blocking : - - Receiver Timeout error in Reception - - Overrun error in Reception - - any error occurs in DMA mode reception - */ - errorcode = huart->ErrorCode; - if ((HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR)) || - ((errorcode & (HAL_UART_ERROR_RTO | HAL_UART_ERROR_ORE)) != 0U)) - { - /* Blocking error : transfer is aborted - Set the UART state ready to be able to start again the process, - Disable Rx Interrupts, and disable Rx DMA request, if ongoing */ - UART_EndRxTransfer(huart); - - /* Abort the UART DMA Rx channel if enabled */ - if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR)) - { - /* Disable the UART DMA Rx request if enabled */ - ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR); - - /* Abort the UART DMA Rx channel */ - if (huart->hdmarx != NULL) - { - /* Set the UART DMA Abort callback : - will lead to call HAL_UART_ErrorCallback() at end of DMA abort procedure */ - huart->hdmarx->XferAbortCallback = UART_DMAAbortOnError; - - /* Abort DMA RX */ - if (HAL_DMA_Abort_IT(huart->hdmarx) != HAL_OK) - { - /* Call Directly huart->hdmarx->XferAbortCallback function in case of error */ - huart->hdmarx->XferAbortCallback(huart->hdmarx); - } - } - else - { - /* Call user error callback */ -#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) - /*Call registered error callback*/ - huart->ErrorCallback(huart); -#else - /*Call legacy weak error callback*/ - HAL_UART_ErrorCallback(huart); -#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ - - } - } - else - { - /* Call user error callback */ -#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) - /*Call registered error callback*/ - huart->ErrorCallback(huart); -#else - /*Call legacy weak error callback*/ - HAL_UART_ErrorCallback(huart); -#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ - } - } - else - { - /* Non Blocking error : transfer could go on. - Error is notified to user through user error callback */ -#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) - /*Call registered error callback*/ - huart->ErrorCallback(huart); -#else - /*Call legacy weak error callback*/ - HAL_UART_ErrorCallback(huart); -#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ - huart->ErrorCode = HAL_UART_ERROR_NONE; - } - } - return; - - } /* End if some error occurs */ - - /* Check current reception Mode : - If Reception till IDLE event has been selected : */ - if ((huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) - && ((isrflags & USART_ISR_IDLE) != 0U) - && ((cr1its & USART_ISR_IDLE) != 0U)) - { - __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_IDLEF); - - /* Check if DMA mode is enabled in UART */ - if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR)) - { - /* DMA mode enabled */ - /* Check received length : If all expected data are received, do nothing, - (DMA cplt callback will be called). - Otherwise, if at least one data has already been received, IDLE event is to be notified to user */ - uint16_t nb_remaining_rx_data = (uint16_t) __HAL_DMA_GET_COUNTER(huart->hdmarx); - if ((nb_remaining_rx_data > 0U) - && (nb_remaining_rx_data < huart->RxXferSize)) - { - /* Reception is not complete */ - huart->RxXferCount = nb_remaining_rx_data; - - /* In Normal mode, end DMA xfer and HAL UART Rx process*/ - if (huart->hdmarx->Init.Mode != DMA_CIRCULAR) - { - /* Disable PE and ERR (Frame error, noise error, overrun error) interrupts */ - ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_PEIE); - ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE); - - /* Disable the DMA transfer for the receiver request by resetting the DMAR bit - in the UART CR3 register */ - ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR); - - /* At end of Rx process, restore huart->RxState to Ready */ - huart->RxState = HAL_UART_STATE_READY; - huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; - - ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_IDLEIE); - - /* Last bytes received, so no need as the abort is immediate */ - (void)HAL_DMA_Abort(huart->hdmarx); - } - - /* Initialize type of RxEvent that correspond to RxEvent callback execution; - In this case, Rx Event type is Idle Event */ - huart->RxEventType = HAL_UART_RXEVENT_IDLE; - -#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) - /*Call registered Rx Event callback*/ - huart->RxEventCallback(huart, (huart->RxXferSize - huart->RxXferCount)); -#else - /*Call legacy weak Rx Event callback*/ - HAL_UARTEx_RxEventCallback(huart, (huart->RxXferSize - huart->RxXferCount)); -#endif /* (USE_HAL_UART_REGISTER_CALLBACKS) */ - } - return; - } - else - { - /* DMA mode not enabled */ - /* Check received length : If all expected data are received, do nothing. - Otherwise, if at least one data has already been received, IDLE event is to be notified to user */ - uint16_t nb_rx_data = huart->RxXferSize - huart->RxXferCount; - if ((huart->RxXferCount > 0U) - && (nb_rx_data > 0U)) - { - /* Disable the UART Parity Error Interrupt and RXNE interrupts */ - ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE | USART_CR1_PEIE)); - - /* Disable the UART Error Interrupt: (Frame error, noise error, overrun error) */ - ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE); - - /* Rx process is completed, restore huart->RxState to Ready */ - huart->RxState = HAL_UART_STATE_READY; - huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; - - /* Clear RxISR function pointer */ - huart->RxISR = NULL; - - ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_IDLEIE); - - /* Initialize type of RxEvent that correspond to RxEvent callback execution; - In this case, Rx Event type is Idle Event */ - huart->RxEventType = HAL_UART_RXEVENT_IDLE; - -#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) - /*Call registered Rx complete callback*/ - huart->RxEventCallback(huart, nb_rx_data); -#else - /*Call legacy weak Rx Event callback*/ - HAL_UARTEx_RxEventCallback(huart, nb_rx_data); -#endif /* (USE_HAL_UART_REGISTER_CALLBACKS) */ - } - return; - } - } - - /* UART wakeup from Stop mode interrupt occurred ---------------------------*/ - if (((isrflags & USART_ISR_WUF) != 0U) && ((cr3its & USART_CR3_WUFIE) != 0U)) - { - __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_WUF); - - /* UART Rx state is not reset as a reception process might be ongoing. - If UART handle state fields need to be reset to READY, this could be done in Wakeup callback */ - -#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) - /* Call registered Wakeup Callback */ - huart->WakeupCallback(huart); -#else - /* Call legacy weak Wakeup Callback */ - HAL_UARTEx_WakeupCallback(huart); -#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ - return; - } - - /* UART in mode Transmitter ------------------------------------------------*/ - if (((isrflags & USART_ISR_TXE) != 0U) - && ((cr1its & USART_CR1_TXEIE) != 0U)) - { - if (huart->TxISR != NULL) - { - huart->TxISR(huart); - } - return; - } - - /* UART in mode Transmitter (transmission end) -----------------------------*/ - if (((isrflags & USART_ISR_TC) != 0U) && ((cr1its & USART_CR1_TCIE) != 0U)) - { - UART_EndTransmit_IT(huart); - return; - } - -} - -/** - * @brief Tx Transfer completed callback. - * @param huart UART handle. - * @retval None - */ -__weak void HAL_UART_TxCpltCallback(UART_HandleTypeDef *huart) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(huart); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_UART_TxCpltCallback can be implemented in the user file. - */ -} - -/** - * @brief Tx Half Transfer completed callback. - * @param huart UART handle. - * @retval None - */ -__weak void HAL_UART_TxHalfCpltCallback(UART_HandleTypeDef *huart) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(huart); - - /* NOTE: This function should not be modified, when the callback is needed, - the HAL_UART_TxHalfCpltCallback can be implemented in the user file. - */ -} - -/** - * @brief Rx Transfer completed callback. - * @param huart UART handle. - * @retval None - */ -__weak void HAL_UART_RxCpltCallback(UART_HandleTypeDef *huart) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(huart); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_UART_RxCpltCallback can be implemented in the user file. - */ -} - -/** - * @brief Rx Half Transfer completed callback. - * @param huart UART handle. - * @retval None - */ -__weak void HAL_UART_RxHalfCpltCallback(UART_HandleTypeDef *huart) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(huart); - - /* NOTE: This function should not be modified, when the callback is needed, - the HAL_UART_RxHalfCpltCallback can be implemented in the user file. - */ -} - -/** - * @brief UART error callback. - * @param huart UART handle. - * @retval None - */ -__weak void HAL_UART_ErrorCallback(UART_HandleTypeDef *huart) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(huart); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_UART_ErrorCallback can be implemented in the user file. - */ -} - -/** - * @brief UART Abort Complete callback. - * @param huart UART handle. - * @retval None - */ -__weak void HAL_UART_AbortCpltCallback(UART_HandleTypeDef *huart) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(huart); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_UART_AbortCpltCallback can be implemented in the user file. - */ -} - -/** - * @brief UART Abort Complete callback. - * @param huart UART handle. - * @retval None - */ -__weak void HAL_UART_AbortTransmitCpltCallback(UART_HandleTypeDef *huart) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(huart); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_UART_AbortTransmitCpltCallback can be implemented in the user file. - */ -} - -/** - * @brief UART Abort Receive Complete callback. - * @param huart UART handle. - * @retval None - */ -__weak void HAL_UART_AbortReceiveCpltCallback(UART_HandleTypeDef *huart) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(huart); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_UART_AbortReceiveCpltCallback can be implemented in the user file. - */ -} - -/** - * @brief Reception Event Callback (Rx event notification called after use of advanced reception service). - * @param huart UART handle - * @param Size Number of data available in application reception buffer (indicates a position in - * reception buffer until which, data are available) - * @retval None - */ -__weak void HAL_UARTEx_RxEventCallback(UART_HandleTypeDef *huart, uint16_t Size) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(huart); - UNUSED(Size); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_UARTEx_RxEventCallback can be implemented in the user file. - */ -} - -/** - * @} - */ - -/** @defgroup UART_Exported_Functions_Group3 Peripheral Control functions - * @brief UART control functions - * -@verbatim - =============================================================================== - ##### Peripheral Control functions ##### - =============================================================================== - [..] - This subsection provides a set of functions allowing to control the UART. - (+) HAL_UART_ReceiverTimeout_Config() API allows to configure the receiver timeout value on the fly - (+) HAL_UART_EnableReceiverTimeout() API enables the receiver timeout feature - (+) HAL_UART_DisableReceiverTimeout() API disables the receiver timeout feature - (+) HAL_MultiProcessor_EnableMuteMode() API enables mute mode - (+) HAL_MultiProcessor_DisableMuteMode() API disables mute mode - (+) HAL_MultiProcessor_EnterMuteMode() API enters mute mode - (+) UART_SetConfig() API configures the UART peripheral - (+) UART_AdvFeatureConfig() API optionally configures the UART advanced features - (+) UART_CheckIdleState() API ensures that TEACK and/or REACK are set after initialization - (+) HAL_HalfDuplex_EnableTransmitter() API disables receiver and enables transmitter - (+) HAL_HalfDuplex_EnableReceiver() API disables transmitter and enables receiver - (+) HAL_LIN_SendBreak() API transmits the break characters -@endverbatim - * @{ - */ - -/** - * @brief Update on the fly the receiver timeout value in RTOR register. - * @param huart Pointer to a UART_HandleTypeDef structure that contains - * the configuration information for the specified UART module. - * @param TimeoutValue receiver timeout value in number of baud blocks. The timeout - * value must be less or equal to 0x0FFFFFFFF. - * @retval None - */ -void HAL_UART_ReceiverTimeout_Config(UART_HandleTypeDef *huart, uint32_t TimeoutValue) -{ - assert_param(IS_UART_RECEIVER_TIMEOUT_VALUE(TimeoutValue)); - MODIFY_REG(huart->Instance->RTOR, USART_RTOR_RTO, TimeoutValue); -} - -/** - * @brief Enable the UART receiver timeout feature. - * @param huart Pointer to a UART_HandleTypeDef structure that contains - * the configuration information for the specified UART module. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_UART_EnableReceiverTimeout(UART_HandleTypeDef *huart) -{ - if (huart->gState == HAL_UART_STATE_READY) - { - /* Process Locked */ - __HAL_LOCK(huart); - - huart->gState = HAL_UART_STATE_BUSY; - - /* Set the USART RTOEN bit */ - SET_BIT(huart->Instance->CR2, USART_CR2_RTOEN); - - huart->gState = HAL_UART_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(huart); - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Disable the UART receiver timeout feature. - * @param huart Pointer to a UART_HandleTypeDef structure that contains - * the configuration information for the specified UART module. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_UART_DisableReceiverTimeout(UART_HandleTypeDef *huart) -{ - if (huart->gState == HAL_UART_STATE_READY) - { - /* Process Locked */ - __HAL_LOCK(huart); - - huart->gState = HAL_UART_STATE_BUSY; - - /* Clear the USART RTOEN bit */ - CLEAR_BIT(huart->Instance->CR2, USART_CR2_RTOEN); - - huart->gState = HAL_UART_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(huart); - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Enable UART in mute mode (does not mean UART enters mute mode; - * to enter mute mode, HAL_MultiProcessor_EnterMuteMode() API must be called). - * @param huart UART handle. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_MultiProcessor_EnableMuteMode(UART_HandleTypeDef *huart) -{ - __HAL_LOCK(huart); - - huart->gState = HAL_UART_STATE_BUSY; - - /* Enable USART mute mode by setting the MME bit in the CR1 register */ - ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_MME); - - huart->gState = HAL_UART_STATE_READY; - - return (UART_CheckIdleState(huart)); -} - -/** - * @brief Disable UART mute mode (does not mean the UART actually exits mute mode - * as it may not have been in mute mode at this very moment). - * @param huart UART handle. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_MultiProcessor_DisableMuteMode(UART_HandleTypeDef *huart) -{ - __HAL_LOCK(huart); - - huart->gState = HAL_UART_STATE_BUSY; - - /* Disable USART mute mode by clearing the MME bit in the CR1 register */ - ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_MME); - - huart->gState = HAL_UART_STATE_READY; - - return (UART_CheckIdleState(huart)); -} - -/** - * @brief Enter UART mute mode (means UART actually enters mute mode). - * @note To exit from mute mode, HAL_MultiProcessor_DisableMuteMode() API must be called. - * @param huart UART handle. - * @retval None - */ -void HAL_MultiProcessor_EnterMuteMode(UART_HandleTypeDef *huart) -{ - __HAL_UART_SEND_REQ(huart, UART_MUTE_MODE_REQUEST); -} - -/** - * @brief Enable the UART transmitter and disable the UART receiver. - * @param huart UART handle. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_HalfDuplex_EnableTransmitter(UART_HandleTypeDef *huart) -{ - __HAL_LOCK(huart); - huart->gState = HAL_UART_STATE_BUSY; - - /* Clear TE and RE bits */ - ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_TE | USART_CR1_RE)); - - /* Enable the USART's transmit interface by setting the TE bit in the USART CR1 register */ - ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_TE); - - huart->gState = HAL_UART_STATE_READY; - - __HAL_UNLOCK(huart); - - return HAL_OK; -} - -/** - * @brief Enable the UART receiver and disable the UART transmitter. - * @param huart UART handle. - * @retval HAL status. - */ -HAL_StatusTypeDef HAL_HalfDuplex_EnableReceiver(UART_HandleTypeDef *huart) -{ - __HAL_LOCK(huart); - huart->gState = HAL_UART_STATE_BUSY; - - /* Clear TE and RE bits */ - ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_TE | USART_CR1_RE)); - - /* Enable the USART's receive interface by setting the RE bit in the USART CR1 register */ - ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_RE); - - huart->gState = HAL_UART_STATE_READY; - - __HAL_UNLOCK(huart); - - return HAL_OK; -} - - -/** - * @brief Transmit break characters. - * @param huart UART handle. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_LIN_SendBreak(UART_HandleTypeDef *huart) -{ - /* Check the parameters */ - assert_param(IS_UART_LIN_INSTANCE(huart->Instance)); - - __HAL_LOCK(huart); - - huart->gState = HAL_UART_STATE_BUSY; - - /* Send break characters */ - __HAL_UART_SEND_REQ(huart, UART_SENDBREAK_REQUEST); - - huart->gState = HAL_UART_STATE_READY; - - __HAL_UNLOCK(huart); - - return HAL_OK; -} - -/** - * @} - */ - -/** @defgroup UART_Exported_Functions_Group4 Peripheral State and Error functions - * @brief UART Peripheral State functions - * -@verbatim - ============================================================================== - ##### Peripheral State and Error functions ##### - ============================================================================== - [..] - This subsection provides functions allowing to : - (+) Return the UART handle state. - (+) Return the UART handle error code - -@endverbatim - * @{ - */ - -/** - * @brief Return the UART handle state. - * @param huart Pointer to a UART_HandleTypeDef structure that contains - * the configuration information for the specified UART. - * @retval HAL state - */ -HAL_UART_StateTypeDef HAL_UART_GetState(const UART_HandleTypeDef *huart) -{ - uint32_t temp1; - uint32_t temp2; - temp1 = huart->gState; - temp2 = huart->RxState; - - return (HAL_UART_StateTypeDef)(temp1 | temp2); -} - -/** - * @brief Return the UART handle error code. - * @param huart Pointer to a UART_HandleTypeDef structure that contains - * the configuration information for the specified UART. - * @retval UART Error Code - */ -uint32_t HAL_UART_GetError(const UART_HandleTypeDef *huart) -{ - return huart->ErrorCode; -} -/** - * @} - */ - -/** - * @} - */ - -/** @defgroup UART_Private_Functions UART Private Functions - * @{ - */ - -/** - * @brief Initialize the callbacks to their default values. - * @param huart UART handle. - * @retval none - */ -#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) -void UART_InitCallbacksToDefault(UART_HandleTypeDef *huart) -{ - /* Init the UART Callback settings */ - huart->TxHalfCpltCallback = HAL_UART_TxHalfCpltCallback; /* Legacy weak TxHalfCpltCallback */ - huart->TxCpltCallback = HAL_UART_TxCpltCallback; /* Legacy weak TxCpltCallback */ - huart->RxHalfCpltCallback = HAL_UART_RxHalfCpltCallback; /* Legacy weak RxHalfCpltCallback */ - huart->RxCpltCallback = HAL_UART_RxCpltCallback; /* Legacy weak RxCpltCallback */ - huart->ErrorCallback = HAL_UART_ErrorCallback; /* Legacy weak ErrorCallback */ - huart->AbortCpltCallback = HAL_UART_AbortCpltCallback; /* Legacy weak AbortCpltCallback */ - huart->AbortTransmitCpltCallback = HAL_UART_AbortTransmitCpltCallback; /* Legacy weak AbortTransmitCpltCallback */ - huart->AbortReceiveCpltCallback = HAL_UART_AbortReceiveCpltCallback; /* Legacy weak AbortReceiveCpltCallback */ - huart->WakeupCallback = HAL_UARTEx_WakeupCallback; /* Legacy weak WakeupCallback */ - huart->RxEventCallback = HAL_UARTEx_RxEventCallback; /* Legacy weak RxEventCallback */ - -} -#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ - -/** - * @brief Configure the UART peripheral. - * @param huart UART handle. - * @retval HAL status - */ -HAL_StatusTypeDef UART_SetConfig(UART_HandleTypeDef *huart) -{ - uint32_t tmpreg; - uint16_t brrtemp; - UART_ClockSourceTypeDef clocksource; - uint32_t usartdiv; - HAL_StatusTypeDef ret = HAL_OK; - uint32_t pclk; - - /* Check the parameters */ - assert_param(IS_UART_BAUDRATE(huart->Init.BaudRate)); - assert_param(IS_UART_WORD_LENGTH(huart->Init.WordLength)); - assert_param(IS_UART_STOPBITS(huart->Init.StopBits)); - assert_param(IS_UART_ONE_BIT_SAMPLE(huart->Init.OneBitSampling)); - - assert_param(IS_UART_PARITY(huart->Init.Parity)); - assert_param(IS_UART_MODE(huart->Init.Mode)); - assert_param(IS_UART_HARDWARE_FLOW_CONTROL(huart->Init.HwFlowCtl)); - assert_param(IS_UART_OVERSAMPLING(huart->Init.OverSampling)); - - /*-------------------------- USART CR1 Configuration -----------------------*/ - /* Clear M, PCE, PS, TE, RE and OVER8 bits and configure - * the UART Word Length, Parity, Mode and oversampling: - * set the M bits according to huart->Init.WordLength value - * set PCE and PS bits according to huart->Init.Parity value - * set TE and RE bits according to huart->Init.Mode value - * set OVER8 bit according to huart->Init.OverSampling value */ - tmpreg = (uint32_t)huart->Init.WordLength | huart->Init.Parity | huart->Init.Mode | huart->Init.OverSampling ; - MODIFY_REG(huart->Instance->CR1, USART_CR1_FIELDS, tmpreg); - - /*-------------------------- USART CR2 Configuration -----------------------*/ - /* Configure the UART Stop Bits: Set STOP[13:12] bits according - * to huart->Init.StopBits value */ - MODIFY_REG(huart->Instance->CR2, USART_CR2_STOP, huart->Init.StopBits); - - /*-------------------------- USART CR3 Configuration -----------------------*/ - /* Configure - * - UART HardWare Flow Control: set CTSE and RTSE bits according - * to huart->Init.HwFlowCtl value - * - one-bit sampling method versus three samples' majority rule according - * to huart->Init.OneBitSampling (not applicable to LPUART) */ - tmpreg = (uint32_t)huart->Init.HwFlowCtl; - - tmpreg |= huart->Init.OneBitSampling; - MODIFY_REG(huart->Instance->CR3, USART_CR3_FIELDS, tmpreg); - - - /*-------------------------- USART BRR Configuration -----------------------*/ - UART_GETCLOCKSOURCE(huart, clocksource); - - if (huart->Init.OverSampling == UART_OVERSAMPLING_8) - { - switch (clocksource) - { - case UART_CLOCKSOURCE_PCLK1: - pclk = HAL_RCC_GetPCLK1Freq(); - break; - case UART_CLOCKSOURCE_PCLK2: - pclk = HAL_RCC_GetPCLK2Freq(); - break; - case UART_CLOCKSOURCE_HSI: - pclk = (uint32_t) HSI_VALUE; - break; - case UART_CLOCKSOURCE_SYSCLK: - pclk = HAL_RCC_GetSysClockFreq(); - break; - case UART_CLOCKSOURCE_LSE: - pclk = (uint32_t) LSE_VALUE; - break; - default: - pclk = 0U; - ret = HAL_ERROR; - break; - } - - /* USARTDIV must be greater than or equal to 0d16 */ - if (pclk != 0U) - { - usartdiv = (uint32_t)(UART_DIV_SAMPLING8(pclk, huart->Init.BaudRate)); - if ((usartdiv >= UART_BRR_MIN) && (usartdiv <= UART_BRR_MAX)) - { - brrtemp = (uint16_t)(usartdiv & 0xFFF0U); - brrtemp |= (uint16_t)((usartdiv & (uint16_t)0x000FU) >> 1U); - huart->Instance->BRR = brrtemp; - } - else - { - ret = HAL_ERROR; - } - } - } - else - { - switch (clocksource) - { - case UART_CLOCKSOURCE_PCLK1: - pclk = HAL_RCC_GetPCLK1Freq(); - break; - case UART_CLOCKSOURCE_PCLK2: - pclk = HAL_RCC_GetPCLK2Freq(); - break; - case UART_CLOCKSOURCE_HSI: - pclk = (uint32_t) HSI_VALUE; - break; - case UART_CLOCKSOURCE_SYSCLK: - pclk = HAL_RCC_GetSysClockFreq(); - break; - case UART_CLOCKSOURCE_LSE: - pclk = (uint32_t) LSE_VALUE; - break; - default: - pclk = 0U; - ret = HAL_ERROR; - break; - } - - if (pclk != 0U) - { - /* USARTDIV must be greater than or equal to 0d16 */ - usartdiv = (uint32_t)(UART_DIV_SAMPLING16(pclk, huart->Init.BaudRate)); - if ((usartdiv >= UART_BRR_MIN) && (usartdiv <= UART_BRR_MAX)) - { - huart->Instance->BRR = (uint16_t)usartdiv; - } - else - { - ret = HAL_ERROR; - } - } - } - - - /* Clear ISR function pointers */ - huart->RxISR = NULL; - huart->TxISR = NULL; - - return ret; -} - -/** - * @brief Configure the UART peripheral advanced features. - * @param huart UART handle. - * @retval None - */ -void UART_AdvFeatureConfig(UART_HandleTypeDef *huart) -{ - /* Check whether the set of advanced features to configure is properly set */ - assert_param(IS_UART_ADVFEATURE_INIT(huart->AdvancedInit.AdvFeatureInit)); - - /* if required, configure RX/TX pins swap */ - if (HAL_IS_BIT_SET(huart->AdvancedInit.AdvFeatureInit, UART_ADVFEATURE_SWAP_INIT)) - { - assert_param(IS_UART_ADVFEATURE_SWAP(huart->AdvancedInit.Swap)); - MODIFY_REG(huart->Instance->CR2, USART_CR2_SWAP, huart->AdvancedInit.Swap); - } - - /* if required, configure TX pin active level inversion */ - if (HAL_IS_BIT_SET(huart->AdvancedInit.AdvFeatureInit, UART_ADVFEATURE_TXINVERT_INIT)) - { - assert_param(IS_UART_ADVFEATURE_TXINV(huart->AdvancedInit.TxPinLevelInvert)); - MODIFY_REG(huart->Instance->CR2, USART_CR2_TXINV, huart->AdvancedInit.TxPinLevelInvert); - } - - /* if required, configure RX pin active level inversion */ - if (HAL_IS_BIT_SET(huart->AdvancedInit.AdvFeatureInit, UART_ADVFEATURE_RXINVERT_INIT)) - { - assert_param(IS_UART_ADVFEATURE_RXINV(huart->AdvancedInit.RxPinLevelInvert)); - MODIFY_REG(huart->Instance->CR2, USART_CR2_RXINV, huart->AdvancedInit.RxPinLevelInvert); - } - - /* if required, configure data inversion */ - if (HAL_IS_BIT_SET(huart->AdvancedInit.AdvFeatureInit, UART_ADVFEATURE_DATAINVERT_INIT)) - { - assert_param(IS_UART_ADVFEATURE_DATAINV(huart->AdvancedInit.DataInvert)); - MODIFY_REG(huart->Instance->CR2, USART_CR2_DATAINV, huart->AdvancedInit.DataInvert); - } - - /* if required, configure RX overrun detection disabling */ - if (HAL_IS_BIT_SET(huart->AdvancedInit.AdvFeatureInit, UART_ADVFEATURE_RXOVERRUNDISABLE_INIT)) - { - assert_param(IS_UART_OVERRUN(huart->AdvancedInit.OverrunDisable)); - MODIFY_REG(huart->Instance->CR3, USART_CR3_OVRDIS, huart->AdvancedInit.OverrunDisable); - } - - /* if required, configure DMA disabling on reception error */ - if (HAL_IS_BIT_SET(huart->AdvancedInit.AdvFeatureInit, UART_ADVFEATURE_DMADISABLEONERROR_INIT)) - { - assert_param(IS_UART_ADVFEATURE_DMAONRXERROR(huart->AdvancedInit.DMADisableonRxError)); - MODIFY_REG(huart->Instance->CR3, USART_CR3_DDRE, huart->AdvancedInit.DMADisableonRxError); - } - - /* if required, configure auto Baud rate detection scheme */ - if (HAL_IS_BIT_SET(huart->AdvancedInit.AdvFeatureInit, UART_ADVFEATURE_AUTOBAUDRATE_INIT)) - { - assert_param(IS_USART_AUTOBAUDRATE_DETECTION_INSTANCE(huart->Instance)); - assert_param(IS_UART_ADVFEATURE_AUTOBAUDRATE(huart->AdvancedInit.AutoBaudRateEnable)); - MODIFY_REG(huart->Instance->CR2, USART_CR2_ABREN, huart->AdvancedInit.AutoBaudRateEnable); - /* set auto Baudrate detection parameters if detection is enabled */ - if (huart->AdvancedInit.AutoBaudRateEnable == UART_ADVFEATURE_AUTOBAUDRATE_ENABLE) - { - assert_param(IS_UART_ADVFEATURE_AUTOBAUDRATEMODE(huart->AdvancedInit.AutoBaudRateMode)); - MODIFY_REG(huart->Instance->CR2, USART_CR2_ABRMODE, huart->AdvancedInit.AutoBaudRateMode); - } - } - - /* if required, configure MSB first on communication line */ - if (HAL_IS_BIT_SET(huart->AdvancedInit.AdvFeatureInit, UART_ADVFEATURE_MSBFIRST_INIT)) - { - assert_param(IS_UART_ADVFEATURE_MSBFIRST(huart->AdvancedInit.MSBFirst)); - MODIFY_REG(huart->Instance->CR2, USART_CR2_MSBFIRST, huart->AdvancedInit.MSBFirst); - } -} - -/** - * @brief Check the UART Idle State. - * @param huart UART handle. - * @retval HAL status - */ -HAL_StatusTypeDef UART_CheckIdleState(UART_HandleTypeDef *huart) -{ - uint32_t tickstart; - - /* Initialize the UART ErrorCode */ - huart->ErrorCode = HAL_UART_ERROR_NONE; - - /* Init tickstart for timeout management */ - tickstart = HAL_GetTick(); - - /* Check if the Transmitter is enabled */ - if ((huart->Instance->CR1 & USART_CR1_TE) == USART_CR1_TE) - { - /* Wait until TEACK flag is set */ - if (UART_WaitOnFlagUntilTimeout(huart, USART_ISR_TEACK, RESET, tickstart, HAL_UART_TIMEOUT_VALUE) != HAL_OK) - { - /* Disable TXE interrupt for the interrupt process */ - ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_TXEIE)); - - huart->gState = HAL_UART_STATE_READY; - - __HAL_UNLOCK(huart); - - /* Timeout occurred */ - return HAL_TIMEOUT; - } - } - - /* Check if the Receiver is enabled */ - if ((huart->Instance->CR1 & USART_CR1_RE) == USART_CR1_RE) - { - /* Wait until REACK flag is set */ - if (UART_WaitOnFlagUntilTimeout(huart, USART_ISR_REACK, RESET, tickstart, HAL_UART_TIMEOUT_VALUE) != HAL_OK) - { - /* Disable RXNE, PE and ERR (Frame error, noise error, overrun error) - interrupts for the interrupt process */ - ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE | USART_CR1_PEIE)); - ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE); - - huart->RxState = HAL_UART_STATE_READY; - - __HAL_UNLOCK(huart); - - /* Timeout occurred */ - return HAL_TIMEOUT; - } - } - - /* Initialize the UART State */ - huart->gState = HAL_UART_STATE_READY; - huart->RxState = HAL_UART_STATE_READY; - huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; - huart->RxEventType = HAL_UART_RXEVENT_TC; - - __HAL_UNLOCK(huart); - - return HAL_OK; -} - -/** - * @brief This function handles UART Communication Timeout. It waits - * until a flag is no longer in the specified status. - * @param huart UART handle. - * @param Flag Specifies the UART flag to check - * @param Status The actual Flag status (SET or RESET) - * @param Tickstart Tick start value - * @param Timeout Timeout duration - * @retval HAL status - */ -HAL_StatusTypeDef UART_WaitOnFlagUntilTimeout(UART_HandleTypeDef *huart, uint32_t Flag, FlagStatus Status, - uint32_t Tickstart, uint32_t Timeout) -{ - /* Wait until flag is set */ - while ((__HAL_UART_GET_FLAG(huart, Flag) ? SET : RESET) == Status) - { - /* Check for the Timeout */ - if (Timeout != HAL_MAX_DELAY) - { - if (((HAL_GetTick() - Tickstart) > Timeout) || (Timeout == 0U)) - { - - return HAL_TIMEOUT; - } - - if ((READ_BIT(huart->Instance->CR1, USART_CR1_RE) != 0U) && (Flag != UART_FLAG_TXE) && (Flag != UART_FLAG_TC)) - { - if (__HAL_UART_GET_FLAG(huart, UART_FLAG_ORE) == SET) - { - /* Clear Overrun Error flag*/ - __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_OREF); - - /* Blocking error : transfer is aborted - Set the UART state ready to be able to start again the process, - Disable Rx Interrupts if ongoing */ - UART_EndRxTransfer(huart); - - huart->ErrorCode = HAL_UART_ERROR_ORE; - - /* Process Unlocked */ - __HAL_UNLOCK(huart); - - return HAL_ERROR; - } - if (__HAL_UART_GET_FLAG(huart, UART_FLAG_RTOF) == SET) - { - /* Clear Receiver Timeout flag*/ - __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_RTOF); - - /* Blocking error : transfer is aborted - Set the UART state ready to be able to start again the process, - Disable Rx Interrupts if ongoing */ - UART_EndRxTransfer(huart); - - huart->ErrorCode = HAL_UART_ERROR_RTO; - - /* Process Unlocked */ - __HAL_UNLOCK(huart); - - return HAL_TIMEOUT; - } - } - } - } - return HAL_OK; -} - -/** - * @brief Start Receive operation in interrupt mode. - * @note This function could be called by all HAL UART API providing reception in Interrupt mode. - * @note When calling this function, parameters validity is considered as already checked, - * i.e. Rx State, buffer address, ... - * UART Handle is assumed as Locked. - * @param huart UART handle. - * @param pData Pointer to data buffer (u8 or u16 data elements). - * @param Size Amount of data elements (u8 or u16) to be received. - * @retval HAL status - */ -HAL_StatusTypeDef UART_Start_Receive_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size) -{ - huart->pRxBuffPtr = pData; - huart->RxXferSize = Size; - huart->RxXferCount = Size; - huart->RxISR = NULL; - - /* Computation of UART mask to apply to RDR register */ - UART_MASK_COMPUTATION(huart); - - huart->ErrorCode = HAL_UART_ERROR_NONE; - huart->RxState = HAL_UART_STATE_BUSY_RX; - - /* Enable the UART Error Interrupt: (Frame error, noise error, overrun error) */ - ATOMIC_SET_BIT(huart->Instance->CR3, USART_CR3_EIE); - - /* Set the Rx ISR function pointer according to the data word length */ - if ((huart->Init.WordLength == UART_WORDLENGTH_9B) && (huart->Init.Parity == UART_PARITY_NONE)) - { - huart->RxISR = UART_RxISR_16BIT; - } - else - { - huart->RxISR = UART_RxISR_8BIT; - } - - /* Enable the UART Parity Error interrupt and Data Register Not Empty interrupt */ - if (huart->Init.Parity != UART_PARITY_NONE) - { - ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_PEIE | USART_CR1_RXNEIE); - } - else - { - ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_RXNEIE); - } - return HAL_OK; -} - -/** - * @brief Start Receive operation in DMA mode. - * @note This function could be called by all HAL UART API providing reception in DMA mode. - * @note When calling this function, parameters validity is considered as already checked, - * i.e. Rx State, buffer address, ... - * UART Handle is assumed as Locked. - * @param huart UART handle. - * @param pData Pointer to data buffer (u8 or u16 data elements). - * @param Size Amount of data elements (u8 or u16) to be received. - * @retval HAL status - */ -HAL_StatusTypeDef UART_Start_Receive_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size) -{ - huart->pRxBuffPtr = pData; - huart->RxXferSize = Size; - - huart->ErrorCode = HAL_UART_ERROR_NONE; - huart->RxState = HAL_UART_STATE_BUSY_RX; - - if (huart->hdmarx != NULL) - { - /* Set the UART DMA transfer complete callback */ - huart->hdmarx->XferCpltCallback = UART_DMAReceiveCplt; - - /* Set the UART DMA Half transfer complete callback */ - huart->hdmarx->XferHalfCpltCallback = UART_DMARxHalfCplt; - - /* Set the DMA error callback */ - huart->hdmarx->XferErrorCallback = UART_DMAError; - - /* Set the DMA abort callback */ - huart->hdmarx->XferAbortCallback = NULL; - - /* Enable the DMA channel */ - if (HAL_DMA_Start_IT(huart->hdmarx, (uint32_t)&huart->Instance->RDR, (uint32_t)huart->pRxBuffPtr, Size) != HAL_OK) - { - /* Set error code to DMA */ - huart->ErrorCode = HAL_UART_ERROR_DMA; - - /* Restore huart->RxState to ready */ - huart->RxState = HAL_UART_STATE_READY; - - return HAL_ERROR; - } - } - - /* Enable the UART Parity Error Interrupt */ - if (huart->Init.Parity != UART_PARITY_NONE) - { - ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_PEIE); - } - - /* Enable the UART Error Interrupt: (Frame error, noise error, overrun error) */ - ATOMIC_SET_BIT(huart->Instance->CR3, USART_CR3_EIE); - - /* Enable the DMA transfer for the receiver request by setting the DMAR bit - in the UART CR3 register */ - ATOMIC_SET_BIT(huart->Instance->CR3, USART_CR3_DMAR); - - return HAL_OK; -} - - -/** - * @brief End ongoing Tx transfer on UART peripheral (following error detection or Transmit completion). - * @param huart UART handle. - * @retval None - */ -static void UART_EndTxTransfer(UART_HandleTypeDef *huart) -{ - /* Disable TXEIE and TCIE interrupts */ - ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_TXEIE | USART_CR1_TCIE)); - - /* At end of Tx process, restore huart->gState to Ready */ - huart->gState = HAL_UART_STATE_READY; -} - - -/** - * @brief End ongoing Rx transfer on UART peripheral (following error detection or Reception completion). - * @param huart UART handle. - * @retval None - */ -static void UART_EndRxTransfer(UART_HandleTypeDef *huart) -{ - /* Disable RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts */ - ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE | USART_CR1_PEIE)); - ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE); - - /* In case of reception waiting for IDLE event, disable also the IDLE IE interrupt source */ - if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) - { - ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_IDLEIE); - } - - /* At end of Rx process, restore huart->RxState to Ready */ - huart->RxState = HAL_UART_STATE_READY; - huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; - - /* Reset RxIsr function pointer */ - huart->RxISR = NULL; -} - - -/** - * @brief DMA UART transmit process complete callback. - * @param hdma DMA handle. - * @retval None - */ -static void UART_DMATransmitCplt(DMA_HandleTypeDef *hdma) -{ - UART_HandleTypeDef *huart = (UART_HandleTypeDef *)(hdma->Parent); - - /* DMA Normal mode */ - if (hdma->Init.Mode != DMA_CIRCULAR) - { - huart->TxXferCount = 0U; - - /* Disable the DMA transfer for transmit request by resetting the DMAT bit - in the UART CR3 register */ - ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAT); - - /* Enable the UART Transmit Complete Interrupt */ - ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_TCIE); - } - /* DMA Circular mode */ - else - { -#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) - /*Call registered Tx complete callback*/ - huart->TxCpltCallback(huart); -#else - /*Call legacy weak Tx complete callback*/ - HAL_UART_TxCpltCallback(huart); -#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ - } -} - -/** - * @brief DMA UART transmit process half complete callback. - * @param hdma DMA handle. - * @retval None - */ -static void UART_DMATxHalfCplt(DMA_HandleTypeDef *hdma) -{ - UART_HandleTypeDef *huart = (UART_HandleTypeDef *)(hdma->Parent); - -#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) - /*Call registered Tx Half complete callback*/ - huart->TxHalfCpltCallback(huart); -#else - /*Call legacy weak Tx Half complete callback*/ - HAL_UART_TxHalfCpltCallback(huart); -#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ -} - -/** - * @brief DMA UART receive process complete callback. - * @param hdma DMA handle. - * @retval None - */ -static void UART_DMAReceiveCplt(DMA_HandleTypeDef *hdma) -{ - UART_HandleTypeDef *huart = (UART_HandleTypeDef *)(hdma->Parent); - - /* DMA Normal mode */ - if (hdma->Init.Mode != DMA_CIRCULAR) - { - huart->RxXferCount = 0U; - - /* Disable PE and ERR (Frame error, noise error, overrun error) interrupts */ - ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_PEIE); - ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE); - - /* Disable the DMA transfer for the receiver request by resetting the DMAR bit - in the UART CR3 register */ - ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR); - - /* At end of Rx process, restore huart->RxState to Ready */ - huart->RxState = HAL_UART_STATE_READY; - - /* If Reception till IDLE event has been selected, Disable IDLE Interrupt */ - if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) - { - ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_IDLEIE); - } - } - - /* Initialize type of RxEvent that correspond to RxEvent callback execution; - In this case, Rx Event type is Transfer Complete */ - huart->RxEventType = HAL_UART_RXEVENT_TC; - - /* Check current reception Mode : - If Reception till IDLE event has been selected : use Rx Event callback */ - if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) - { -#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) - /*Call registered Rx Event callback*/ - huart->RxEventCallback(huart, huart->RxXferSize); -#else - /*Call legacy weak Rx Event callback*/ - HAL_UARTEx_RxEventCallback(huart, huart->RxXferSize); -#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ - } - else - { - /* In other cases : use Rx Complete callback */ -#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) - /*Call registered Rx complete callback*/ - huart->RxCpltCallback(huart); -#else - /*Call legacy weak Rx complete callback*/ - HAL_UART_RxCpltCallback(huart); -#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ - } -} - -/** - * @brief DMA UART receive process half complete callback. - * @param hdma DMA handle. - * @retval None - */ -static void UART_DMARxHalfCplt(DMA_HandleTypeDef *hdma) -{ - UART_HandleTypeDef *huart = (UART_HandleTypeDef *)(hdma->Parent); - - /* Initialize type of RxEvent that correspond to RxEvent callback execution; - In this case, Rx Event type is Half Transfer */ - huart->RxEventType = HAL_UART_RXEVENT_HT; - - /* Check current reception Mode : - If Reception till IDLE event has been selected : use Rx Event callback */ - if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) - { -#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) - /*Call registered Rx Event callback*/ - huart->RxEventCallback(huart, huart->RxXferSize / 2U); -#else - /*Call legacy weak Rx Event callback*/ - HAL_UARTEx_RxEventCallback(huart, huart->RxXferSize / 2U); -#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ - } - else - { - /* In other cases : use Rx Half Complete callback */ -#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) - /*Call registered Rx Half complete callback*/ - huart->RxHalfCpltCallback(huart); -#else - /*Call legacy weak Rx Half complete callback*/ - HAL_UART_RxHalfCpltCallback(huart); -#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ - } -} - -/** - * @brief DMA UART communication error callback. - * @param hdma DMA handle. - * @retval None - */ -static void UART_DMAError(DMA_HandleTypeDef *hdma) -{ - UART_HandleTypeDef *huart = (UART_HandleTypeDef *)(hdma->Parent); - - const HAL_UART_StateTypeDef gstate = huart->gState; - const HAL_UART_StateTypeDef rxstate = huart->RxState; - - /* Stop UART DMA Tx request if ongoing */ - if ((HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAT)) && - (gstate == HAL_UART_STATE_BUSY_TX)) - { - huart->TxXferCount = 0U; - UART_EndTxTransfer(huart); - } - - /* Stop UART DMA Rx request if ongoing */ - if ((HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR)) && - (rxstate == HAL_UART_STATE_BUSY_RX)) - { - huart->RxXferCount = 0U; - UART_EndRxTransfer(huart); - } - - huart->ErrorCode |= HAL_UART_ERROR_DMA; - -#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) - /*Call registered error callback*/ - huart->ErrorCallback(huart); -#else - /*Call legacy weak error callback*/ - HAL_UART_ErrorCallback(huart); -#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ -} - -/** - * @brief DMA UART communication abort callback, when initiated by HAL services on Error - * (To be called at end of DMA Abort procedure following error occurrence). - * @param hdma DMA handle. - * @retval None - */ -static void UART_DMAAbortOnError(DMA_HandleTypeDef *hdma) -{ - UART_HandleTypeDef *huart = (UART_HandleTypeDef *)(hdma->Parent); - huart->RxXferCount = 0U; - huart->TxXferCount = 0U; - -#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) - /*Call registered error callback*/ - huart->ErrorCallback(huart); -#else - /*Call legacy weak error callback*/ - HAL_UART_ErrorCallback(huart); -#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ -} - -/** - * @brief DMA UART Tx communication abort callback, when initiated by user - * (To be called at end of DMA Tx Abort procedure following user abort request). - * @note When this callback is executed, User Abort complete call back is called only if no - * Abort still ongoing for Rx DMA Handle. - * @param hdma DMA handle. - * @retval None - */ -static void UART_DMATxAbortCallback(DMA_HandleTypeDef *hdma) -{ - UART_HandleTypeDef *huart = (UART_HandleTypeDef *)(hdma->Parent); - - huart->hdmatx->XferAbortCallback = NULL; - - /* Check if an Abort process is still ongoing */ - if (huart->hdmarx != NULL) - { - if (huart->hdmarx->XferAbortCallback != NULL) - { - return; - } - } - - /* No Abort process still ongoing : All DMA channels are aborted, call user Abort Complete callback */ - huart->TxXferCount = 0U; - huart->RxXferCount = 0U; - - /* Reset errorCode */ - huart->ErrorCode = HAL_UART_ERROR_NONE; - - /* Clear the Error flags in the ICR register */ - __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_OREF | UART_CLEAR_NEF | UART_CLEAR_PEF | UART_CLEAR_FEF); - - - /* Restore huart->gState and huart->RxState to Ready */ - huart->gState = HAL_UART_STATE_READY; - huart->RxState = HAL_UART_STATE_READY; - huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; - - /* Call user Abort complete callback */ -#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) - /* Call registered Abort complete callback */ - huart->AbortCpltCallback(huart); -#else - /* Call legacy weak Abort complete callback */ - HAL_UART_AbortCpltCallback(huart); -#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ -} - - -/** - * @brief DMA UART Rx communication abort callback, when initiated by user - * (To be called at end of DMA Rx Abort procedure following user abort request). - * @note When this callback is executed, User Abort complete call back is called only if no - * Abort still ongoing for Tx DMA Handle. - * @param hdma DMA handle. - * @retval None - */ -static void UART_DMARxAbortCallback(DMA_HandleTypeDef *hdma) -{ - UART_HandleTypeDef *huart = (UART_HandleTypeDef *)(hdma->Parent); - - huart->hdmarx->XferAbortCallback = NULL; - - /* Check if an Abort process is still ongoing */ - if (huart->hdmatx != NULL) - { - if (huart->hdmatx->XferAbortCallback != NULL) - { - return; - } - } - - /* No Abort process still ongoing : All DMA channels are aborted, call user Abort Complete callback */ - huart->TxXferCount = 0U; - huart->RxXferCount = 0U; - - /* Reset errorCode */ - huart->ErrorCode = HAL_UART_ERROR_NONE; - - /* Clear the Error flags in the ICR register */ - __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_OREF | UART_CLEAR_NEF | UART_CLEAR_PEF | UART_CLEAR_FEF); - - /* Discard the received data */ - __HAL_UART_SEND_REQ(huart, UART_RXDATA_FLUSH_REQUEST); - - /* Restore huart->gState and huart->RxState to Ready */ - huart->gState = HAL_UART_STATE_READY; - huart->RxState = HAL_UART_STATE_READY; - huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; - - /* Call user Abort complete callback */ -#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) - /* Call registered Abort complete callback */ - huart->AbortCpltCallback(huart); -#else - /* Call legacy weak Abort complete callback */ - HAL_UART_AbortCpltCallback(huart); -#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ -} - - -/** - * @brief DMA UART Tx communication abort callback, when initiated by user by a call to - * HAL_UART_AbortTransmit_IT API (Abort only Tx transfer) - * (This callback is executed at end of DMA Tx Abort procedure following user abort request, - * and leads to user Tx Abort Complete callback execution). - * @param hdma DMA handle. - * @retval None - */ -static void UART_DMATxOnlyAbortCallback(DMA_HandleTypeDef *hdma) -{ - UART_HandleTypeDef *huart = (UART_HandleTypeDef *)(hdma->Parent); - - huart->TxXferCount = 0U; - - - /* Restore huart->gState to Ready */ - huart->gState = HAL_UART_STATE_READY; - - /* Call user Abort complete callback */ -#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) - /* Call registered Abort Transmit Complete Callback */ - huart->AbortTransmitCpltCallback(huart); -#else - /* Call legacy weak Abort Transmit Complete Callback */ - HAL_UART_AbortTransmitCpltCallback(huart); -#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ -} - -/** - * @brief DMA UART Rx communication abort callback, when initiated by user by a call to - * HAL_UART_AbortReceive_IT API (Abort only Rx transfer) - * (This callback is executed at end of DMA Rx Abort procedure following user abort request, - * and leads to user Rx Abort Complete callback execution). - * @param hdma DMA handle. - * @retval None - */ -static void UART_DMARxOnlyAbortCallback(DMA_HandleTypeDef *hdma) -{ - UART_HandleTypeDef *huart = (UART_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; - - huart->RxXferCount = 0U; - - /* Clear the Error flags in the ICR register */ - __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_OREF | UART_CLEAR_NEF | UART_CLEAR_PEF | UART_CLEAR_FEF); - - /* Discard the received data */ - __HAL_UART_SEND_REQ(huart, UART_RXDATA_FLUSH_REQUEST); - - /* Restore huart->RxState to Ready */ - huart->RxState = HAL_UART_STATE_READY; - huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; - - /* Call user Abort complete callback */ -#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) - /* Call registered Abort Receive Complete Callback */ - huart->AbortReceiveCpltCallback(huart); -#else - /* Call legacy weak Abort Receive Complete Callback */ - HAL_UART_AbortReceiveCpltCallback(huart); -#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ -} - -/** - * @brief TX interrupt handler for 7 or 8 bits data word length . - * @note Function is called under interruption only, once - * interruptions have been enabled by HAL_UART_Transmit_IT(). - * @param huart UART handle. - * @retval None - */ -static void UART_TxISR_8BIT(UART_HandleTypeDef *huart) -{ - /* Check that a Tx process is ongoing */ - if (huart->gState == HAL_UART_STATE_BUSY_TX) - { - if (huart->TxXferCount == 0U) - { - /* Disable the UART Transmit Data Register Empty Interrupt */ - ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_TXEIE); - - /* Enable the UART Transmit Complete Interrupt */ - ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_TCIE); - } - else - { - huart->Instance->TDR = (uint8_t)(*huart->pTxBuffPtr & (uint8_t)0xFF); - huart->pTxBuffPtr++; - huart->TxXferCount--; - } - } -} - -/** - * @brief TX interrupt handler for 9 bits data word length. - * @note Function is called under interruption only, once - * interruptions have been enabled by HAL_UART_Transmit_IT(). - * @param huart UART handle. - * @retval None - */ -static void UART_TxISR_16BIT(UART_HandleTypeDef *huart) -{ - const uint16_t *tmp; - - /* Check that a Tx process is ongoing */ - if (huart->gState == HAL_UART_STATE_BUSY_TX) - { - if (huart->TxXferCount == 0U) - { - /* Disable the UART Transmit Data Register Empty Interrupt */ - ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_TXEIE); - - /* Enable the UART Transmit Complete Interrupt */ - ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_TCIE); - } - else - { - tmp = (const uint16_t *) huart->pTxBuffPtr; - huart->Instance->TDR = (((uint32_t)(*tmp)) & 0x01FFUL); - huart->pTxBuffPtr += 2U; - huart->TxXferCount--; - } - } -} - - -/** - * @brief Wrap up transmission in non-blocking mode. - * @param huart pointer to a UART_HandleTypeDef structure that contains - * the configuration information for the specified UART module. - * @retval None - */ -static void UART_EndTransmit_IT(UART_HandleTypeDef *huart) -{ - /* Disable the UART Transmit Complete Interrupt */ - ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_TCIE); - - /* Tx process is ended, restore huart->gState to Ready */ - huart->gState = HAL_UART_STATE_READY; - - /* Cleat TxISR function pointer */ - huart->TxISR = NULL; - -#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) - /*Call registered Tx complete callback*/ - huart->TxCpltCallback(huart); -#else - /*Call legacy weak Tx complete callback*/ - HAL_UART_TxCpltCallback(huart); -#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ -} - -/** - * @brief RX interrupt handler for 7 or 8 bits data word length . - * @param huart UART handle. - * @retval None - */ -static void UART_RxISR_8BIT(UART_HandleTypeDef *huart) -{ - uint16_t uhMask = huart->Mask; - uint16_t uhdata; - - /* Check that a Rx process is ongoing */ - if (huart->RxState == HAL_UART_STATE_BUSY_RX) - { - uhdata = (uint16_t) READ_REG(huart->Instance->RDR); - *huart->pRxBuffPtr = (uint8_t)(uhdata & (uint8_t)uhMask); - huart->pRxBuffPtr++; - huart->RxXferCount--; - - if (huart->RxXferCount == 0U) - { - /* Disable the UART Parity Error Interrupt and RXNE interrupts */ - ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE | USART_CR1_PEIE)); - - /* Disable the UART Error Interrupt: (Frame error, noise error, overrun error) */ - ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE); - - /* Rx process is completed, restore huart->RxState to Ready */ - huart->RxState = HAL_UART_STATE_READY; - - /* Clear RxISR function pointer */ - huart->RxISR = NULL; - - /* Initialize type of RxEvent to Transfer Complete */ - huart->RxEventType = HAL_UART_RXEVENT_TC; - - /* Check that USART RTOEN bit is set */ - if (READ_BIT(huart->Instance->CR2, USART_CR2_RTOEN) != 0U) - { - /* Enable the UART Receiver Timeout Interrupt */ - ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_RTOIE); - } - - /* Check current reception Mode : - If Reception till IDLE event has been selected : */ - if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) - { - /* Set reception type to Standard */ - huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; - - /* Disable IDLE interrupt */ - ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_IDLEIE); - - if (__HAL_UART_GET_FLAG(huart, UART_FLAG_IDLE) == SET) - { - /* Clear IDLE Flag */ - __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_IDLEF); - } - -#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) - /*Call registered Rx Event callback*/ - huart->RxEventCallback(huart, huart->RxXferSize); -#else - /*Call legacy weak Rx Event callback*/ - HAL_UARTEx_RxEventCallback(huart, huart->RxXferSize); -#endif /* (USE_HAL_UART_REGISTER_CALLBACKS) */ - } - else - { - /* Standard reception API called */ -#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) - /*Call registered Rx complete callback*/ - huart->RxCpltCallback(huart); -#else - /*Call legacy weak Rx complete callback*/ - HAL_UART_RxCpltCallback(huart); -#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ - } - } - } - else - { - /* Clear RXNE interrupt flag */ - __HAL_UART_SEND_REQ(huart, UART_RXDATA_FLUSH_REQUEST); - } -} - -/** - * @brief RX interrupt handler for 9 bits data word length . - * @note Function is called under interruption only, once - * interruptions have been enabled by HAL_UART_Receive_IT() - * @param huart UART handle. - * @retval None - */ -static void UART_RxISR_16BIT(UART_HandleTypeDef *huart) -{ - uint16_t *tmp; - uint16_t uhMask = huart->Mask; - uint16_t uhdata; - - /* Check that a Rx process is ongoing */ - if (huart->RxState == HAL_UART_STATE_BUSY_RX) - { - uhdata = (uint16_t) READ_REG(huart->Instance->RDR); - tmp = (uint16_t *) huart->pRxBuffPtr ; - *tmp = (uint16_t)(uhdata & uhMask); - huart->pRxBuffPtr += 2U; - huart->RxXferCount--; - - if (huart->RxXferCount == 0U) - { - /* Disable the UART Parity Error Interrupt and RXNE interrupt*/ - ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE | USART_CR1_PEIE)); - - /* Disable the UART Error Interrupt: (Frame error, noise error, overrun error) */ - ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE); - - /* Rx process is completed, restore huart->RxState to Ready */ - huart->RxState = HAL_UART_STATE_READY; - - /* Clear RxISR function pointer */ - huart->RxISR = NULL; - - /* Initialize type of RxEvent to Transfer Complete */ - huart->RxEventType = HAL_UART_RXEVENT_TC; - - /* Check that USART RTOEN bit is set */ - if (READ_BIT(huart->Instance->CR2, USART_CR2_RTOEN) != 0U) - { - /* Enable the UART Receiver Timeout Interrupt */ - ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_RTOIE); - } - - /* Check current reception Mode : - If Reception till IDLE event has been selected : */ - if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) - { - /* Set reception type to Standard */ - huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; - - /* Disable IDLE interrupt */ - ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_IDLEIE); - - if (__HAL_UART_GET_FLAG(huart, UART_FLAG_IDLE) == SET) - { - /* Clear IDLE Flag */ - __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_IDLEF); - } - -#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) - /*Call registered Rx Event callback*/ - huart->RxEventCallback(huart, huart->RxXferSize); -#else - /*Call legacy weak Rx Event callback*/ - HAL_UARTEx_RxEventCallback(huart, huart->RxXferSize); -#endif /* (USE_HAL_UART_REGISTER_CALLBACKS) */ - } - else - { - /* Standard reception API called */ -#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) - /*Call registered Rx complete callback*/ - huart->RxCpltCallback(huart); -#else - /*Call legacy weak Rx complete callback*/ - HAL_UART_RxCpltCallback(huart); -#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ - } - } - } - else - { - /* Clear RXNE interrupt flag */ - __HAL_UART_SEND_REQ(huart, UART_RXDATA_FLUSH_REQUEST); - } -} - - -/** - * @} - */ - -#endif /* HAL_UART_MODULE_ENABLED */ -/** - * @} - */ - -/** - * @} - */ - diff --git a/Drivers/STM32F3xx_HAL_Driver/Src/stm32f3xx_hal_uart_ex.c b/Drivers/STM32F3xx_HAL_Driver/Src/stm32f3xx_hal_uart_ex.c deleted file mode 100644 index c63133c..0000000 --- a/Drivers/STM32F3xx_HAL_Driver/Src/stm32f3xx_hal_uart_ex.c +++ /dev/null @@ -1,773 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f3xx_hal_uart_ex.c - * @author MCD Application Team - * @brief Extended UART HAL module driver. - * This file provides firmware functions to manage the following extended - * functionalities of the Universal Asynchronous Receiver Transmitter Peripheral (UART). - * + Initialization and de-initialization functions - * + Peripheral Control functions - * - * - ****************************************************************************** - * @attention - * - * Copyright (c) 2016 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - @verbatim - ============================================================================== - ##### UART peripheral extended features ##### - ============================================================================== - - (#) Declare a UART_HandleTypeDef handle structure. - - (#) For the UART RS485 Driver Enable mode, initialize the UART registers - by calling the HAL_RS485Ex_Init() API. - - @endverbatim - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f3xx_hal.h" - -/** @addtogroup STM32F3xx_HAL_Driver - * @{ - */ - -/** @defgroup UARTEx UARTEx - * @brief UART Extended HAL module driver - * @{ - */ - -#ifdef HAL_UART_MODULE_ENABLED - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ - -/* Private macros ------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private function prototypes -----------------------------------------------*/ -/** @defgroup UARTEx_Private_Functions UARTEx Private Functions - * @{ - */ -static void UARTEx_Wakeup_AddressConfig(UART_HandleTypeDef *huart, UART_WakeUpTypeDef WakeUpSelection); -/** - * @} - */ - -/* Exported functions --------------------------------------------------------*/ - -/** @defgroup UARTEx_Exported_Functions UARTEx Exported Functions - * @{ - */ - -/** @defgroup UARTEx_Exported_Functions_Group1 Initialization and de-initialization functions - * @brief Extended Initialization and Configuration Functions - * -@verbatim -=============================================================================== - ##### Initialization and Configuration functions ##### - =============================================================================== - [..] - This subsection provides a set of functions allowing to initialize the USARTx or the UARTy - in asynchronous mode. - (+) For the asynchronous mode the parameters below can be configured: - (++) Baud Rate - (++) Word Length - (++) Stop Bit - (++) Parity: If the parity is enabled, then the MSB bit of the data written - in the data register is transmitted but is changed by the parity bit. - (++) Hardware flow control - (++) Receiver/transmitter modes - (++) Over Sampling Method - (++) One-Bit Sampling Method - (+) For the asynchronous mode, the following advanced features can be configured as well: - (++) TX and/or RX pin level inversion - (++) data logical level inversion - (++) RX and TX pins swap - (++) RX overrun detection disabling - (++) DMA disabling on RX error - (++) MSB first on communication line - (++) auto Baud rate detection - [..] - The HAL_RS485Ex_Init() API follows the UART RS485 mode configuration - procedures (details for the procedures are available in reference manual). - -@endverbatim - - Depending on the frame length defined by the M1 and M0 bits (7-bit, - 8-bit or 9-bit), the possible UART formats are listed in the - following table. - - Table 1. UART frame format. - +-----------------------------------------------------------------------+ - | M1 bit | M0 bit | PCE bit | UART frame | - |---------|---------|-----------|---------------------------------------| - | 0 | 0 | 0 | | SB | 8 bit data | STB | | - |---------|---------|-----------|---------------------------------------| - | 0 | 0 | 1 | | SB | 7 bit data | PB | STB | | - |---------|---------|-----------|---------------------------------------| - | 0 | 1 | 0 | | SB | 9 bit data | STB | | - |---------|---------|-----------|---------------------------------------| - | 0 | 1 | 1 | | SB | 8 bit data | PB | STB | | - |---------|---------|-----------|---------------------------------------| - | 1 | 0 | 0 | | SB | 7 bit data | STB | | - |---------|---------|-----------|---------------------------------------| - | 1 | 0 | 1 | | SB | 6 bit data | PB | STB | | - +-----------------------------------------------------------------------+ - - * @{ - */ - -/** - * @brief Initialize the RS485 Driver enable feature according to the specified - * parameters in the UART_InitTypeDef and creates the associated handle. - * @param huart UART handle. - * @param Polarity Select the driver enable polarity. - * This parameter can be one of the following values: - * @arg @ref UART_DE_POLARITY_HIGH DE signal is active high - * @arg @ref UART_DE_POLARITY_LOW DE signal is active low - * @param AssertionTime Driver Enable assertion time: - * 5-bit value defining the time between the activation of the DE (Driver Enable) - * signal and the beginning of the start bit. It is expressed in sample time - * units (1/8 or 1/16 bit time, depending on the oversampling rate) - * @param DeassertionTime Driver Enable deassertion time: - * 5-bit value defining the time between the end of the last stop bit, in a - * transmitted message, and the de-activation of the DE (Driver Enable) signal. - * It is expressed in sample time units (1/8 or 1/16 bit time, depending on the - * oversampling rate). - * @retval HAL status - */ -HAL_StatusTypeDef HAL_RS485Ex_Init(UART_HandleTypeDef *huart, uint32_t Polarity, uint32_t AssertionTime, - uint32_t DeassertionTime) -{ - uint32_t temp; - - /* Check the UART handle allocation */ - if (huart == NULL) - { - return HAL_ERROR; - } - /* Check the Driver Enable UART instance */ - assert_param(IS_UART_DRIVER_ENABLE_INSTANCE(huart->Instance)); - - /* Check the Driver Enable polarity */ - assert_param(IS_UART_DE_POLARITY(Polarity)); - - /* Check the Driver Enable assertion time */ - assert_param(IS_UART_ASSERTIONTIME(AssertionTime)); - - /* Check the Driver Enable deassertion time */ - assert_param(IS_UART_DEASSERTIONTIME(DeassertionTime)); - - if (huart->gState == HAL_UART_STATE_RESET) - { - /* Allocate lock resource and initialize it */ - huart->Lock = HAL_UNLOCKED; - -#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) - UART_InitCallbacksToDefault(huart); - - if (huart->MspInitCallback == NULL) - { - huart->MspInitCallback = HAL_UART_MspInit; - } - - /* Init the low level hardware */ - huart->MspInitCallback(huart); -#else - /* Init the low level hardware : GPIO, CLOCK, CORTEX */ - HAL_UART_MspInit(huart); -#endif /* (USE_HAL_UART_REGISTER_CALLBACKS) */ - } - - huart->gState = HAL_UART_STATE_BUSY; - - /* Disable the Peripheral */ - __HAL_UART_DISABLE(huart); - - /* Perform advanced settings configuration */ - /* For some items, configuration requires to be done prior TE and RE bits are set */ - if (huart->AdvancedInit.AdvFeatureInit != UART_ADVFEATURE_NO_INIT) - { - UART_AdvFeatureConfig(huart); - } - - /* Set the UART Communication parameters */ - if (UART_SetConfig(huart) == HAL_ERROR) - { - return HAL_ERROR; - } - - /* Enable the Driver Enable mode by setting the DEM bit in the CR3 register */ - SET_BIT(huart->Instance->CR3, USART_CR3_DEM); - - /* Set the Driver Enable polarity */ - MODIFY_REG(huart->Instance->CR3, USART_CR3_DEP, Polarity); - - /* Set the Driver Enable assertion and deassertion times */ - temp = (AssertionTime << UART_CR1_DEAT_ADDRESS_LSB_POS); - temp |= (DeassertionTime << UART_CR1_DEDT_ADDRESS_LSB_POS); - MODIFY_REG(huart->Instance->CR1, (USART_CR1_DEDT | USART_CR1_DEAT), temp); - - /* Enable the Peripheral */ - __HAL_UART_ENABLE(huart); - - /* TEACK and/or REACK to check before moving huart->gState and huart->RxState to Ready */ - return (UART_CheckIdleState(huart)); -} - -/** - * @} - */ - -/** @defgroup UARTEx_Exported_Functions_Group2 IO operation functions - * @brief Extended functions - * -@verbatim - =============================================================================== - ##### IO operation functions ##### - =============================================================================== - This subsection provides a set of Wakeup and FIFO mode related callback functions. - - (#) Wakeup from Stop mode Callback: - (+) HAL_UARTEx_WakeupCallback() - -@endverbatim - * @{ - */ - -/** - * @brief UART wakeup from Stop mode callback. - * @param huart UART handle. - * @retval None - */ -__weak void HAL_UARTEx_WakeupCallback(UART_HandleTypeDef *huart) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(huart); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_UARTEx_WakeupCallback can be implemented in the user file. - */ -} - - -/** - * @} - */ - -/** @defgroup UARTEx_Exported_Functions_Group3 Peripheral Control functions - * @brief Extended Peripheral Control functions - * -@verbatim - =============================================================================== - ##### Peripheral Control functions ##### - =============================================================================== - [..] This section provides the following functions: - (+) HAL_MultiProcessorEx_AddressLength_Set() API optionally sets the UART node address - detection length to more than 4 bits for multiprocessor address mark wake up. - (+) HAL_UARTEx_StopModeWakeUpSourceConfig() API defines the wake-up from stop mode - trigger: address match, Start Bit detection or RXNE bit status. - (+) HAL_UARTEx_EnableStopMode() API enables the UART to wake up the MCU from stop mode - (+) HAL_UARTEx_DisableStopMode() API disables the above functionality - - [..] This subsection also provides a set of additional functions providing enhanced reception - services to user. (For example, these functions allow application to handle use cases - where number of data to be received is unknown). - - (#) Compared to standard reception services which only consider number of received - data elements as reception completion criteria, these functions also consider additional events - as triggers for updating reception status to caller : - (+) Detection of inactivity period (RX line has not been active for a given period). - (++) RX inactivity detected by IDLE event, i.e. RX line has been in idle state (normally high state) - for 1 frame time, after last received byte. - (++) RX inactivity detected by RTO, i.e. line has been in idle state - for a programmable time, after last received byte. - (+) Detection that a specific character has been received. - - (#) There are two mode of transfer: - (+) Blocking mode: The reception is performed in polling mode, until either expected number of data is received, - or till IDLE event occurs. Reception is handled only during function execution. - When function exits, no data reception could occur. HAL status and number of actually received data elements, - are returned by function after finishing transfer. - (+) Non-Blocking mode: The reception is performed using Interrupts or DMA. - These API's return the HAL status. - The end of the data processing will be indicated through the - dedicated UART IRQ when using Interrupt mode or the DMA IRQ when using DMA mode. - The HAL_UARTEx_RxEventCallback() user callback will be executed during Receive process - The HAL_UART_ErrorCallback()user callback will be executed when a reception error is detected. - - (#) Blocking mode API: - (+) HAL_UARTEx_ReceiveToIdle() - - (#) Non-Blocking mode API with Interrupt: - (+) HAL_UARTEx_ReceiveToIdle_IT() - - (#) Non-Blocking mode API with DMA: - (+) HAL_UARTEx_ReceiveToIdle_DMA() - -@endverbatim - * @{ - */ - -/** - * @brief By default in multiprocessor mode, when the wake up method is set - * to address mark, the UART handles only 4-bit long addresses detection; - * this API allows to enable longer addresses detection (6-, 7- or 8-bit - * long). - * @note Addresses detection lengths are: 6-bit address detection in 7-bit data mode, - * 7-bit address detection in 8-bit data mode, 8-bit address detection in 9-bit data mode. - * @param huart UART handle. - * @param AddressLength This parameter can be one of the following values: - * @arg @ref UART_ADDRESS_DETECT_4B 4-bit long address - * @arg @ref UART_ADDRESS_DETECT_7B 6-, 7- or 8-bit long address - * @retval HAL status - */ -HAL_StatusTypeDef HAL_MultiProcessorEx_AddressLength_Set(UART_HandleTypeDef *huart, uint32_t AddressLength) -{ - /* Check the UART handle allocation */ - if (huart == NULL) - { - return HAL_ERROR; - } - - /* Check the address length parameter */ - assert_param(IS_UART_ADDRESSLENGTH_DETECT(AddressLength)); - - huart->gState = HAL_UART_STATE_BUSY; - - /* Disable the Peripheral */ - __HAL_UART_DISABLE(huart); - - /* Set the address length */ - MODIFY_REG(huart->Instance->CR2, USART_CR2_ADDM7, AddressLength); - - /* Enable the Peripheral */ - __HAL_UART_ENABLE(huart); - - /* TEACK and/or REACK to check before moving huart->gState to Ready */ - return (UART_CheckIdleState(huart)); -} - -/** - * @brief Set Wakeup from Stop mode interrupt flag selection. - * @note It is the application responsibility to enable the interrupt used as - * usart_wkup interrupt source before entering low-power mode. - * @param huart UART handle. - * @param WakeUpSelection Address match, Start Bit detection or RXNE/RXFNE bit status. - * This parameter can be one of the following values: - * @arg @ref UART_WAKEUP_ON_ADDRESS - * @arg @ref UART_WAKEUP_ON_STARTBIT - * @arg @ref UART_WAKEUP_ON_READDATA_NONEMPTY - * @retval HAL status - */ -HAL_StatusTypeDef HAL_UARTEx_StopModeWakeUpSourceConfig(UART_HandleTypeDef *huart, UART_WakeUpTypeDef WakeUpSelection) -{ - HAL_StatusTypeDef status = HAL_OK; - uint32_t tickstart; - - /* check the wake-up from stop mode UART instance */ - assert_param(IS_UART_WAKEUP_FROMSTOP_INSTANCE(huart->Instance)); - /* check the wake-up selection parameter */ - assert_param(IS_UART_WAKEUP_SELECTION(WakeUpSelection.WakeUpEvent)); - - /* Process Locked */ - __HAL_LOCK(huart); - - huart->gState = HAL_UART_STATE_BUSY; - - /* Disable the Peripheral */ - __HAL_UART_DISABLE(huart); - - /* Set the wake-up selection scheme */ - MODIFY_REG(huart->Instance->CR3, USART_CR3_WUS, WakeUpSelection.WakeUpEvent); - - if (WakeUpSelection.WakeUpEvent == UART_WAKEUP_ON_ADDRESS) - { - UARTEx_Wakeup_AddressConfig(huart, WakeUpSelection); - } - - /* Enable the Peripheral */ - __HAL_UART_ENABLE(huart); - - /* Init tickstart for timeout management */ - tickstart = HAL_GetTick(); - - /* Wait until REACK flag is set */ - if (UART_WaitOnFlagUntilTimeout(huart, USART_ISR_REACK, RESET, tickstart, HAL_UART_TIMEOUT_VALUE) != HAL_OK) - { - status = HAL_TIMEOUT; - } - else - { - /* Initialize the UART State */ - huart->gState = HAL_UART_STATE_READY; - } - - /* Process Unlocked */ - __HAL_UNLOCK(huart); - - return status; -} - -/** - * @brief Enable UART Stop Mode. - * @note The UART is able to wake up the MCU from Stop 1 mode as long as UART clock is HSI or LSE. - * @param huart UART handle. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_UARTEx_EnableStopMode(UART_HandleTypeDef *huart) -{ - /* Process Locked */ - __HAL_LOCK(huart); - - /* Set UESM bit */ - ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_UESM); - - /* Process Unlocked */ - __HAL_UNLOCK(huart); - - return HAL_OK; -} - -/** - * @brief Disable UART Stop Mode. - * @param huart UART handle. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_UARTEx_DisableStopMode(UART_HandleTypeDef *huart) -{ - /* Process Locked */ - __HAL_LOCK(huart); - - /* Clear UESM bit */ - ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_UESM); - - /* Process Unlocked */ - __HAL_UNLOCK(huart); - - return HAL_OK; -} - -/** - * @brief Receive an amount of data in blocking mode till either the expected number of data - * is received or an IDLE event occurs. - * @note HAL_OK is returned if reception is completed (expected number of data has been received) - * or if reception is stopped after IDLE event (less than the expected number of data has been received) - * In this case, RxLen output parameter indicates number of data available in reception buffer. - * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), - * the received data is handled as a set of uint16_t. In this case, Size must indicate the number - * of uint16_t available through pData. - * @param huart UART handle. - * @param pData Pointer to data buffer (uint8_t or uint16_t data elements). - * @param Size Amount of data elements (uint8_t or uint16_t) to be received. - * @param RxLen Number of data elements finally received - * (could be lower than Size, in case reception ends on IDLE event) - * @param Timeout Timeout duration expressed in ms (covers the whole reception sequence). - * @retval HAL status - */ -HAL_StatusTypeDef HAL_UARTEx_ReceiveToIdle(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size, uint16_t *RxLen, - uint32_t Timeout) -{ - uint8_t *pdata8bits; - uint16_t *pdata16bits; - uint16_t uhMask; - uint32_t tickstart; - - /* Check that a Rx process is not already ongoing */ - if (huart->RxState == HAL_UART_STATE_READY) - { - if ((pData == NULL) || (Size == 0U)) - { - return HAL_ERROR; - } - - huart->ErrorCode = HAL_UART_ERROR_NONE; - huart->RxState = HAL_UART_STATE_BUSY_RX; - huart->ReceptionType = HAL_UART_RECEPTION_TOIDLE; - huart->RxEventType = HAL_UART_RXEVENT_TC; - - /* Init tickstart for timeout management */ - tickstart = HAL_GetTick(); - - huart->RxXferSize = Size; - huart->RxXferCount = Size; - - /* Computation of UART mask to apply to RDR register */ - UART_MASK_COMPUTATION(huart); - uhMask = huart->Mask; - - /* In case of 9bits/No Parity transfer, pRxData needs to be handled as a uint16_t pointer */ - if ((huart->Init.WordLength == UART_WORDLENGTH_9B) && (huart->Init.Parity == UART_PARITY_NONE)) - { - pdata8bits = NULL; - pdata16bits = (uint16_t *) pData; - } - else - { - pdata8bits = pData; - pdata16bits = NULL; - } - - /* Initialize output number of received elements */ - *RxLen = 0U; - - /* as long as data have to be received */ - while (huart->RxXferCount > 0U) - { - /* Check if IDLE flag is set */ - if (__HAL_UART_GET_FLAG(huart, UART_FLAG_IDLE)) - { - /* Clear IDLE flag in ISR */ - __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_IDLEF); - - /* If Set, but no data ever received, clear flag without exiting loop */ - /* If Set, and data has already been received, this means Idle Event is valid : End reception */ - if (*RxLen > 0U) - { - huart->RxEventType = HAL_UART_RXEVENT_IDLE; - huart->RxState = HAL_UART_STATE_READY; - - return HAL_OK; - } - } - - /* Check if RXNE flag is set */ - if (__HAL_UART_GET_FLAG(huart, UART_FLAG_RXNE)) - { - if (pdata8bits == NULL) - { - *pdata16bits = (uint16_t)(huart->Instance->RDR & uhMask); - pdata16bits++; - } - else - { - *pdata8bits = (uint8_t)(huart->Instance->RDR & (uint8_t)uhMask); - pdata8bits++; - } - /* Increment number of received elements */ - *RxLen += 1U; - huart->RxXferCount--; - } - - /* Check for the Timeout */ - if (Timeout != HAL_MAX_DELAY) - { - if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0U)) - { - huart->RxState = HAL_UART_STATE_READY; - - return HAL_TIMEOUT; - } - } - } - - /* Set number of received elements in output parameter : RxLen */ - *RxLen = huart->RxXferSize - huart->RxXferCount; - /* At end of Rx process, restore huart->RxState to Ready */ - huart->RxState = HAL_UART_STATE_READY; - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Receive an amount of data in interrupt mode till either the expected number of data - * is received or an IDLE event occurs. - * @note Reception is initiated by this function call. Further progress of reception is achieved thanks - * to UART interrupts raised by RXNE and IDLE events. Callback is called at end of reception indicating - * number of received data elements. - * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), - * the received data is handled as a set of uint16_t. In this case, Size must indicate the number - * of uint16_t available through pData. - * @param huart UART handle. - * @param pData Pointer to data buffer (uint8_t or uint16_t data elements). - * @param Size Amount of data elements (uint8_t or uint16_t) to be received. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_UARTEx_ReceiveToIdle_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Check that a Rx process is not already ongoing */ - if (huart->RxState == HAL_UART_STATE_READY) - { - if ((pData == NULL) || (Size == 0U)) - { - return HAL_ERROR; - } - - /* Set Reception type to reception till IDLE Event*/ - huart->ReceptionType = HAL_UART_RECEPTION_TOIDLE; - huart->RxEventType = HAL_UART_RXEVENT_TC; - - (void)UART_Start_Receive_IT(huart, pData, Size); - - if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) - { - __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_IDLEF); - ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_IDLEIE); - } - else - { - /* In case of errors already pending when reception is started, - Interrupts may have already been raised and lead to reception abortion. - (Overrun error for instance). - In such case Reception Type has been reset to HAL_UART_RECEPTION_STANDARD. */ - status = HAL_ERROR; - } - - return status; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Receive an amount of data in DMA mode till either the expected number - * of data is received or an IDLE event occurs. - * @note Reception is initiated by this function call. Further progress of reception is achieved thanks - * to DMA services, transferring automatically received data elements in user reception buffer and - * calling registered callbacks at half/end of reception. UART IDLE events are also used to consider - * reception phase as ended. In all cases, callback execution will indicate number of received data elements. - * @note When the UART parity is enabled (PCE = 1), the received data contain - * the parity bit (MSB position). - * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), - * the received data is handled as a set of uint16_t. In this case, Size must indicate the number - * of uint16_t available through pData. - * @param huart UART handle. - * @param pData Pointer to data buffer (uint8_t or uint16_t data elements). - * @param Size Amount of data elements (uint8_t or uint16_t) to be received. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_UARTEx_ReceiveToIdle_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size) -{ - HAL_StatusTypeDef status; - - /* Check that a Rx process is not already ongoing */ - if (huart->RxState == HAL_UART_STATE_READY) - { - if ((pData == NULL) || (Size == 0U)) - { - return HAL_ERROR; - } - - /* Set Reception type to reception till IDLE Event*/ - huart->ReceptionType = HAL_UART_RECEPTION_TOIDLE; - huart->RxEventType = HAL_UART_RXEVENT_TC; - - status = UART_Start_Receive_DMA(huart, pData, Size); - - /* Check Rx process has been successfully started */ - if (status == HAL_OK) - { - if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) - { - __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_IDLEF); - ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_IDLEIE); - } - else - { - /* In case of errors already pending when reception is started, - Interrupts may have already been raised and lead to reception abortion. - (Overrun error for instance). - In such case Reception Type has been reset to HAL_UART_RECEPTION_STANDARD. */ - status = HAL_ERROR; - } - } - - return status; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Provide Rx Event type that has lead to RxEvent callback execution. - * @note When HAL_UARTEx_ReceiveToIdle_IT() or HAL_UARTEx_ReceiveToIdle_DMA() API are called, progress - * of reception process is provided to application through calls of Rx Event callback (either default one - * HAL_UARTEx_RxEventCallback() or user registered one). As several types of events could occur (IDLE event, - * Half Transfer, or Transfer Complete), this function allows to retrieve the Rx Event type that has lead - * to Rx Event callback execution. - * @note This function is expected to be called within the user implementation of Rx Event Callback, - * in order to provide the accurate value : - * In Interrupt Mode : - * - HAL_UART_RXEVENT_TC : when Reception has been completed (expected nb of data has been received) - * - HAL_UART_RXEVENT_IDLE : when Idle event occurred prior reception has been completed (nb of - * received data is lower than expected one) - * In DMA Mode : - * - HAL_UART_RXEVENT_TC : when Reception has been completed (expected nb of data has been received) - * - HAL_UART_RXEVENT_HT : when half of expected nb of data has been received - * - HAL_UART_RXEVENT_IDLE : when Idle event occurred prior reception has been completed (nb of - * received data is lower than expected one). - * In DMA mode, RxEvent callback could be called several times; - * When DMA is configured in Normal Mode, HT event does not stop Reception process; - * When DMA is configured in Circular Mode, HT, TC or IDLE events don't stop Reception process; - * @param huart UART handle. - * @retval Rx Event Type (return vale will be a value of @ref UART_RxEvent_Type_Values) - */ -HAL_UART_RxEventTypeTypeDef HAL_UARTEx_GetRxEventType(const UART_HandleTypeDef *huart) -{ - /* Return Rx Event type value, as stored in UART handle */ - return (huart->RxEventType); -} - -/** - * @} - */ - -/** - * @} - */ - -/** @addtogroup UARTEx_Private_Functions - * @{ - */ - -/** - * @brief Initialize the UART wake-up from stop mode parameters when triggered by address detection. - * @param huart UART handle. - * @param WakeUpSelection UART wake up from stop mode parameters. - * @retval None - */ -static void UARTEx_Wakeup_AddressConfig(UART_HandleTypeDef *huart, UART_WakeUpTypeDef WakeUpSelection) -{ - assert_param(IS_UART_ADDRESSLENGTH_DETECT(WakeUpSelection.AddressLength)); - - /* Set the USART address length */ - MODIFY_REG(huart->Instance->CR2, USART_CR2_ADDM7, WakeUpSelection.AddressLength); - - /* Set the USART address node */ - MODIFY_REG(huart->Instance->CR2, USART_CR2_ADD, ((uint32_t)WakeUpSelection.Address << UART_CR2_ADDRESS_LSB_POS)); -} - -/** - * @} - */ - -#endif /* HAL_UART_MODULE_ENABLED */ - -/** - * @} - */ - -/** - * @} - */ - diff --git a/Nucleo-F303RE.ioc b/Nucleo-F303RE.ioc index ef85f27..9208731 100644 --- a/Nucleo-F303RE.ioc +++ b/Nucleo-F303RE.ioc @@ -11,6 +11,27 @@ ADC1.master=1 CAD.formats= CAD.pinconfig= CAD.provider= +Dma.Request0=USART2_RX +Dma.Request1=USART2_TX +Dma.RequestsNb=2 +Dma.USART2_RX.0.Direction=DMA_PERIPH_TO_MEMORY +Dma.USART2_RX.0.Instance=DMA1_Channel6 +Dma.USART2_RX.0.MemDataAlignment=DMA_MDATAALIGN_BYTE +Dma.USART2_RX.0.MemInc=DMA_MINC_ENABLE +Dma.USART2_RX.0.Mode=DMA_NORMAL +Dma.USART2_RX.0.PeriphDataAlignment=DMA_PDATAALIGN_BYTE +Dma.USART2_RX.0.PeriphInc=DMA_PINC_DISABLE +Dma.USART2_RX.0.Priority=DMA_PRIORITY_LOW +Dma.USART2_RX.0.RequestParameters=Instance,Direction,PeriphInc,MemInc,PeriphDataAlignment,MemDataAlignment,Mode,Priority +Dma.USART2_TX.1.Direction=DMA_MEMORY_TO_PERIPH +Dma.USART2_TX.1.Instance=DMA1_Channel7 +Dma.USART2_TX.1.MemDataAlignment=DMA_MDATAALIGN_BYTE +Dma.USART2_TX.1.MemInc=DMA_MINC_ENABLE +Dma.USART2_TX.1.Mode=DMA_NORMAL +Dma.USART2_TX.1.PeriphDataAlignment=DMA_PDATAALIGN_BYTE +Dma.USART2_TX.1.PeriphInc=DMA_PINC_DISABLE +Dma.USART2_TX.1.Priority=DMA_PRIORITY_LOW +Dma.USART2_TX.1.RequestParameters=Instance,Direction,PeriphInc,MemInc,PeriphDataAlignment,MemDataAlignment,Mode,Priority File.Version=6 GPIO.groupedBy=Expand Peripherals KeepUserPlacement=false @@ -19,13 +40,14 @@ Mcu.Family=STM32F3 Mcu.IP0=ADC1 Mcu.IP1=CRC Mcu.IP2=DAC1 -Mcu.IP3=NVIC -Mcu.IP4=RCC -Mcu.IP5=SYS -Mcu.IP6=UART5 -Mcu.IP7=USART2 -Mcu.IP8=USART3 -Mcu.IPNb=9 +Mcu.IP3=DMA +Mcu.IP4=NVIC +Mcu.IP5=RCC +Mcu.IP6=SYS +Mcu.IP7=UART5 +Mcu.IP8=USART2 +Mcu.IP9=USART3 +Mcu.IPNb=10 Mcu.Name=STM32F303R(D-E)Tx Mcu.Package=LQFP64 Mcu.Pin0=PC13 @@ -79,6 +101,8 @@ Mcu.UserName=STM32F303RETx MxCube.Version=6.14.1 MxDb.Version=DB.6.0.141 NVIC.BusFault_IRQn=true\:0\:0\:false\:false\:true\:true\:false\:false +NVIC.DMA1_Channel6_IRQn=true\:0\:0\:false\:false\:true\:false\:true\:true +NVIC.DMA1_Channel7_IRQn=true\:0\:0\:false\:false\:true\:false\:true\:true NVIC.DebugMonitor_IRQn=true\:0\:0\:false\:false\:true\:true\:false\:false NVIC.ForceEnableDMAVector=true NVIC.HardFault_IRQn=true\:0\:0\:false\:false\:true\:true\:false\:false @@ -122,7 +146,7 @@ PA2.GPIOParameters=GPIO_Speed,GPIO_PuPd,GPIO_Label,GPIO_Mode PA2.GPIO_Label=USART2_TX PA2.GPIO_Mode=GPIO_MODE_AF_PP PA2.GPIO_PuPd=GPIO_NOPULL -PA2.GPIO_Speed=GPIO_SPEED_FREQ_LOW +PA2.GPIO_Speed=GPIO_SPEED_FREQ_HIGH PA2.Locked=true PA2.Mode=Asynchronous PA2.Signal=USART2_TX @@ -271,7 +295,7 @@ ProjectManager.ToolChainLocation= ProjectManager.UAScriptAfterPath= ProjectManager.UAScriptBeforePath= ProjectManager.UnderRoot=true -ProjectManager.functionlistsort=1-SystemClock_Config-RCC-false-LL-false,2-MX_GPIO_Init-GPIO-false-LL-true,3-MX_ADC1_Init-ADC1-false-LL-true,4-MX_CRC_Init-CRC-false-LL-true,5-MX_DAC1_Init-DAC1-false-LL-true,6-MX_UART5_Init-UART5-false-LL-true,7-MX_USART2_UART_Init-USART2-false-HAL-true,8-MX_USART3_UART_Init-USART3-false-HAL-true +ProjectManager.functionlistsort=1-SystemClock_Config-RCC-false-LL-false,2-MX_GPIO_Init-GPIO-false-LL-true,3-MX_DMA_Init-DMA-false-HAL-true,4-MX_ADC1_Init-ADC1-false-LL-true,5-MX_CRC_Init-CRC-false-LL-true,6-MX_DAC1_Init-DAC1-false-LL-true,7-MX_UART5_Init-UART5-false-LL-true,8-MX_USART2_UART_Init-USART2-false-LL-true,9-MX_USART3_UART_Init-USART3-false-LL-true RCC.ADC12outputFreq_Value=40000000 RCC.ADC34outputFreq_Value=40000000 RCC.AHBFreq_Value=40000000 @@ -331,7 +355,9 @@ SH.ADCx_IN9.0=ADC1_IN9,IN9-Single-Ended SH.ADCx_IN9.ConfNb=1 SH.COMP_DAC11_group.0=DAC1_OUT1,DAC_OUT1 SH.COMP_DAC11_group.ConfNb=1 -USART2.IPParameters=VirtualMode-Asynchronous,VirtualMode-Hardware Flow Control (RS485) +USART2.BaudRate=5000000 +USART2.IPParameters=VirtualMode-Asynchronous,VirtualMode-Hardware Flow Control (RS485),BaudRate,OverSampling +USART2.OverSampling=UART_OVERSAMPLING_8 USART2.VirtualMode-Asynchronous=VM_ASYNC USART2.VirtualMode-Hardware\ Flow\ Control\ (RS485)=VM_ASYNC USART3.BaudRate=115200